24/7 customer assisting
In case you may encounter some problems of downloading or purchasing, we offer 24/7 customer assisting to support you. Please feel free to contact us if you have any questions.
Online test engine
Online test engine brings users a new experience that you can feel the atmosphere of 644-906 valid test. It enables interactive learning that makes exam preparation process smooth and can support Windows/Mac/Android/iOS operating systems, which allow you to practice valid Cisco 644-906 dumps and review your 644-906 vce files at any electronic equipment. It has no limitation of the number you installed. So you can prepare your 644-906 valid test without limit of time and location. Online version perfectly suit to IT workers.
About our valid 644-906 vce dumps
Our 644-906 vce files contain the latest Cisco 644-906 vce dumps with detailed answers and explanations, which written by our professional trainers and experts. And we check the updating of 644-906 pdf vce everyday to make sure the accuracy of our questions. There are demo of 644-906 free vce for you download in our exam page. One week preparation prior to attend exam is highly recommended.
Cisco 644-906 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Data Plane | 20% | 1 General Forwarding a) Understand and monitor interface counters b) Clear interface counters c) Modify interface counter load interval d) Understand the flow of packets through a router e) Describe the difference in processing of transit packets versus locally destined packets f) Understand the information stored in a forwarding table entry g) Troubleshoot packet drops 2 Access Control Lists (ACLs) a) Implement ACLs to filter traffic on an interface b) Monitor ACL counters c) Modify an existing applied ACL d) Apply ACLs in debug commands e) Resequence an ACL 3 Quality of Service (QoS) a) Implement a basic Quality of Service configuration b) Monitor Quality of Service statistics and behaviors c) Modify an existing QoS configuration d) What is the difference with QoS on IOS XR 4 NetFlow a) Describe NetFlow capabilities in IOS XR b) Implement NetFlow packet sampling c) Verify record export d) Monitor the NetFlow cache 5 Unicast Reverse Path Forwarding (uRPF) a) Implement uRPF on an interface b) Verify uRPF behavior 6 Interface IP addresses a) Configure IPv4 addresses on an interface b) Configure IPv6 addresses on an interface c) Resolve duplicate IP subnets configured on the router 7 IP Multicast a) Describe Multicast forwarding on XR platforms (egress and fabric replication, etc.) b) Monitor IP Multicast traffic c) Troubleshoot IP Multicast (RPF, mrib, mfib, olist, etc.) |
| Control Plane | 21% | 1 Configuring OSPF a) Configure interfaces to be part of the backbone area b) Configure additional interfaces to be part of non-backbone area c) Configure non-default metric on some interfaces d) Configure neighbor logging so adjacency changes can be monitored 2 Verify OSPF a) Determine status of OSPF interfaces b) Determine status of neighbors c) Display OSPF database and determine which links are present 3 Configure ISIS a) Configure the ISIS NET b) Enable ISIS for ipv4 unicast routing c) Configure interfaces for ISIS routing d) Enable ISIS for ipv6 unicast routing e) Enable some but not all of the ipv4 enabled interfaces for ipv6 routing 4 Verify ISIS a) Determine status if interfaces configured for ISIS b) Determine the status of the routing adjacencies c) Display the ipv4 unicast route table d) Turn and debugging for ISIS adjacencies and explain the information shown e) Display the topologies for IPv4 and IPv6. Why are they different? 5 Add Static Routes a) Configure static routes for IPv4 unicast in the global table b) Configure static routes in for IPv4 unicast in two different VRFs 6 Configure BGP a) Configure an autonomous system number for BGP to use b) Configure BGP to support IPv4 routing c) Configure BGP to support IPv6 routing d) Configure iBGP neighbors with the typical configuration to use loopback addresses for peering: e) Use neighbor-groups for identical configuration sections on multiple peers f) Configure one iBGP neighbor to exchange both IPv4 and IPv6 prefixes over an IPv4 session g) Configure one iBGP neighbor as an IPv6-only neighbor with IPv6 peer addresses h) Configure eBGP neighbors for IPv4 routing i) Configure a simple pass_all policy for those eBGP neighbors j) Add VPNv4 capability to one iBGP peer k) Add two VRFs into BGP and redistribute static routes into BGP for VPNv4 l) Configure one iBGP peer to support 6PE type functionality by adding address-familiy IPv6 labeled-unicast 7 Verify BGP a) Display the peer summary status for IPv4 and IPv6 b) Display the IPv4 BGP table c) Display a specific entry and explain AS path and next-hop information d) Determine how much memory the BGP process uses 8 Understanding RPL Concepts a) Configure RPL b) Define an AS-set for use in RPL c) Create a route policy that checks for an AS from the AS-set and adds a community for matching routes d) Create a route-policy that uses an inline prefix-set and changes the local preference when a match is found e) Create a route policy that adds a community where the community is used as a parameter when the policy is called 9 Verify RPL a) Verify that communities are added as expected b) Execute a show bgp… command using a route-policy to modify the output. Compare to regular show command. 10 MPLS LDP a) Configure router to run LDP b) Configure router to log neighbor events c) Enable LDP on interfaces d) Execute show command to verify status of LDP neighbors 11 MPLS TE a) Configure OSPF to support traffic engineering extensions b) Enable RSVP on interfaces c) Create an MPLS TE tunnel with two different path options: d) First path explicit e) Second path dynamic 12 Execute Show Command to Determine Tunnel Status at Tunnel Head a) Execute show command to determine tunnel midpoints traversing the router 13 Configure IP Multicast a) Configure PIM-SM, PIM-SSM, PIM-SSM range b) Configure static-RP, Auto-RP, and BSR for PIM-SM c) Confiigure Multicast NSF d) Configure Multicast VPN e) Configure MSDP for interconnecting PIM-SM domains f) Configure MoFRR g) Configure P2MP-TE for IP Multicast |
| Operating System | 19% | 1 Install a) Add a PIEs or SMUs b) Using TFTP, FTP, USB thumbdrive, and hard drive as the source c) With Activate flag d) Using Source flag e) Using TAR file 2 Licensing a) Activate PIEs or SMUs b) Initial or recovery software installation c) ROMMON Variables d) Turboboot Mini.VM file e) Deactivate PIEs or SMUs f) Remove inactive packages, PIEs, or SMUs g) Committing the Installation Path h) Check which packages are active i) Check which packages are committed j) Check installation log k) See what install requests are currently active l) Understanding security certificate in PIEs and SMUs 3 Packages a) Understanding types of packages b) Mini.PIE c) Mini.VM d) Optional PIEs e) SMUs f) Unstanding IOS-XR versioning and installation restrictions g) Understand P versus PX images and the hardware they support 4 Two-Stage Commit a) Understand what is Active Config b) Understand what is Target Config c) Understand when is a Syntax Check done d) Understand when is a Semantic Check done e) Going back to a previous configuration f) Showing configuration IDs and labels g) Show configuration history h) Loading configuration i) Committing the configuration j) Atomic versus best effort k) With labels and comments l) Replacing the configuration m) Using the commit confirm feature n) Show Config Fail o) Configure interfaces before the physical interface is available 5 Configuration Planes a) Understand what configuration is in the Admin plane b) Understand what configuration is in the Exec plane c) Understand differences between owner and non-owner SDR in access to Admin plane and Exec plane d) Understand the default VRF 6 Task-Based Authorization a) Assigning user privilege to root-system b) Assigning user privilege to root-lr c) Assigning user privilege to cisco-support d) Understand between admin user versus exec username e) Understanding how task based authorization work 7 Process a) How to perform process restart b) How to check processes like state, no. of restarts, job id, pid, tid c) Show where certain processes are running d) How to find a blocked process e) Check how much CPU a process is using 8 LPTS a) Understand what LPTS is b) Understand about LPTS Policer c) How to use Show LPTS Commands d) Show policer values and drop counts in LPTS 9 Memory a) How to look at the memory utilization on the route processor b) How to look at the memory utilization on the line card c) Understand protected memory space versus shared memory and which area uses it d) Check how much memory a process is using 10 Support a) How to use Show Tech Support commands b) Core file configuration locatioin including hard drive and FTP c) Debug commands and with ACL filtering d) Locate core files and moving them to a server 11 Parser (interacting with) a)Using the parser with pipe, include, exclude, begin, regex 12 EEM a) Base assumption of EEM knowledge - understand what is possible and not possible |
| Platform | 21% | 1 Power a) Recommend PDU as a function of facility b) Install appropriate PDU for chassis c) Monitor system power level d) Show power alarm values 2 Environmental a) Recommend environmental levels for system installation b) Verify system-detected environment is within tolerance levels c) Show environmental alarm values d) Clear environmental alarm e) Gather system envinronmental output f) Recommend rack space requirements g) Use proper grounding for installation h) Describe CRS air-flow i) Describe Cisco ASR 9000 air flow 3 Physical Architecture a) Identify CRS switch fabric b)Identfy components of CRS fabric c) Identify MSC d) Identify PLIM e) Identify RP CRS/ASR9000 f) Identify management interface g) Identify cable management h) Differentiate between single and multi-chassis i) Identify ASR9000 line cards j) Identify ASR9000 RSP k) Identify ASR9000 PDU l) Identify ASR9000 SIP-700/SPA m) Identify CRS SIP/SPA n) Identify CRS chassis o) Identify ASR9000 chassis p) Describe ASR9000 fabric 4 Inventory a) Show card status via show platform b) Show cards via show diags c) Show inventory of the system d) Differentiate between admin versus executive plane for show platform 5 Environmental (Merge?) a) Show power usage b) Show fan status c) Diff between admin vs exec plane for show platform 6 Firmware a) Undertanding what is a FPD.PIE b) Configure Auto FPD c) Understand what is Parallel FPD d) Upgrade FPD and ROMMONUpgrade e) Understand FPD versus ROMMON f) Upgrading FPDs and ROMMONs g) Showing current FPD version information |
| Management Plane | 19% | 1 Implementing SNMP on Cisco IOS-XR a) Configuring SNMP (v1, v2c, v3) - Does everyone use SNMPv3? b) Configuring SNMP trap notifications c) Configuring SNMP views, SDRowner and Lrowner d) Configuring SNMP ifIndex persistence e) Verify SNMP configuration - e.g. using snmpget or snmpwalk 2 Implementing Logging Services on Cisco IOS-XR a) Configuring logging buffer b) Configuring syslog server host as logging destination c) Configuring terminals for logging display (term mon) d) Configuring logging facility e) Configuring local logging device and archiving f) Monitoring logging buffer and filtering messages 3 Implementing Physical and Virtual Terminals a) Configuring line templates, vty pools b) Configuring exec timeout c) Securing vty line and vty access d) Verify vty access-group configuration 4 Implementing SSH Access on Cisco IOS-XR a) Configuring SSH server (including crypto key generation) b) SSH client usage c) Verify SSH configuration 5 Implementing Telnet Access on Cisco IOS-XR a) Configuring telnet server on IOS-XR 6 Implementing XML Management on Cisco IOS-XR a) Describe XML management on IOS-XR b) Configuring XML agent on IOS-XR c) Configuring VRF access for XML agent on IOS-XR 7 Implementing TACACS+ Authentication, Authorization and Accounting a) Configuring AAA Authentication - Using TACACS+ and local as fallback b) Confguring AAA Command Authorization - Using TACACS+ and local as fallback c) Configuring AAA Command Accounting d) Implementing TACACS+ - Assigning task groups and privileges e) Verify AAA permissions upon command failure (i.e. debug aaa) 8 Configuring CDP on Cisco IOS-XR a) Enable CDP on IOS-XR b) Monitor CDP neighbors and parameters 9 Implementing Management Plane Protection (MPP) on Cisco IOS-XR a) Configuring MPP to restrict access from specific IP Addresses and protocols b) Configuring MPP to restrict access for out-of-band interface 10 Implementing NTP on Cisco IOS-XR a) Configuring NTP server b) Configuring NTP peer c) Securing NTP configurations (NTP access groups) d) Verifying NTP status 11 Implementing SDRs on IOS-XR a) Understand SDR b) Describe DSC c) Assigning SDR access priviledges d) Creating SDRs, adding nodes to non-owner SDRs e) Creating username and passwords for non-owner SDRs f) Rebooting non-owner SDRs 12 Chassis and Hardware Management a) Displaying installed modules, status of modules b) Displaying environmental status (fan, power, etc) c) Enabling and disabling power to a specific line card or module d) Reloading line card or module e) Displaying chassis and module serial numbers f) Reloading RP g) Reloading entire chassis h) Troubleshoot reason why PLIM/MSC is not booting up 13 Implementing EEM on Cisco IOS-XR |
Our website is a worldwide dumps leader that offers free valid Cisco 644-906 dumps for certification tests, especially for Cisco test. We focus on the study of 644-906 valid test for many years and enjoy a high reputation in IT field by latest 644-906 valid vce, updated information and, most importantly, 644-906 vce dumps with detailed answers and explanations. Our 644-906 vce files contain everything you need to pass 644-906 valid test smoothly. We always adhere to the principle that provides our customers best quality vce dumps with most comprehensive service. This is the reason why most people prefer to choose our 644-906 vce dumps as their best preparation materials.
After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)
One-year free updating
If you bought 644-906 (Implementing and Maintaining Cisco Technologies Using IOS XR) vce dumps from our website, you can enjoy the right of free update your dumps one-year. Once there are latest version of valid 644-906 dumps released, our system will send it to your email immediately. You just need to check your email.
Understanding functional and technical aspects of Platform (644-906 SPAUTO)
The following will be asked from you in the CISCO 644-906 exam dumps pdf:
- Identify ASR9000 line cards
- Describe ASR9000 air-flow
- Install appropriate PDU for chassis
- Show fan status
- Describe ASR9000 fabric
- Show cards via show diagrams
- Identify management interface
- Recommend PDU as a function of facility
- Identify RP CRS/ASR9000
- Identify ASR9000 RSP
- Identify components of CRS fabric
- Identify CRS chassis
- Show power usage
- Recommend rack space requirements
- Identify ASR9000 chassis
- Monitor system power level
- Identify MSC
- Upgrading FPDs and ROMMONs
- Show card status via show platform
- Showing current FPD version information
- Show environmental alarm values
- Understanding what is a FPD.PIE
- Show inventory of the system
- Differentiate between single and multi-chassis
- Identify CRS switch fabric
- Understand what is Parallel FPD
- Upgrade FPD and ROMMON Upgrade
- Identify cable management
- Identify CRS SIP/SPA
- Clear environmental alarm
- Identify ASR9000 PDU
- Understand FPD versus ROMMON
- Difference between admin versus exec plane for show platform
- Difference between admin versus exec plane for show platform
- Identify ASR9000 SIP-700/SPA
- Describe CRS air-flow
- Verify system-detected environment is within tolerance levels
- Recommend environmental levels for system installation
- Gather system environmental output
- Configure Auto FPD
- Show power alarm values
- Use proper grounding for installation
- Identify PLIM
No Help, Full Refund
We guarantee you high pass rate, but if you failed the exam with our 644-906 - Implementing and Maintaining Cisco Technologies Using IOS XR valid vce, you can choose to wait the updating or free change to other dumps if you have other test. If you want to full refund, please within 7 days after exam transcripts come out, and then scanning the transcripts, add it to the emails as attachments and sent to us. After confirmation, we will refund immediately.
1215 Customer Reviews
