(2026) PASS FCP_FMG_AD-7.6 exam with Fortinet FCP_FMG_AD-7.6 Real Exam Questions
Real exam questions are provided for Fortinet Network Security Expert tests, which can make sure you 100% pass
NEW QUESTION # 12
An administrator is copying a system template profile between ADOMs by running the following command:
execute fmprofile export-profile ADOM 3547 /tmp/Backup_File output dump to file: [/tmp/Backup_File] Where does this command export the system template profile from?
- A. FortiManager /tmp/Backup_File folder
- B. FortiManager ADOM policy database
- C. ADOM device database
- D. FortiManager configuration backup file
Answer: B
Explanation:
The command exports the system template profile from the FortiManager ADOM policy database, which stores the configuration templates for devices within that ADOM.
NEW QUESTION # 13
Refer to the exhibits. An administrator runs the reload failure command diagnose test deploymanager reloadconf 262 on FortiManager.
Why does the administrator receive an error message?
- A. The administrator must use the FortiGate name instead of the ID number.
- B. The administrator just recently added FortiGate HQ-NGFW as a model device.
- C. FortiManager does not support FortiOS version 7.0.
- D. FortiManager requires the FortiGate serial number instead of the ID number.
Answer: B
Explanation:
The error occurs because the FortiGate HQ-NGFW device with ID 262 is a newly added model device and has not yet been fully synchronized or installed with a configuration package, which causes the reload configuration command to fail.
NEW QUESTION # 14
An administrator is copying a system template profile between ADOMs by running the following command:
execute fmprofile export-profile ADOM 3547 /tmp/Backup_File
output dump to file: [/tmp/Backup_File]
Where does this command export the system template profile from?
- A. FortiManager /tmp/Backup_File folder
- B. FortiManager ADOM policy database
- C. ADOM device database
- D. FortiManager configuration backup file
Answer: B
Explanation:
The command exports the system template profile from the FortiManager ADOM policy database, which stores the configuration templates for devices within that ADOM.
NEW QUESTION # 15
An administrator configures a new BGP peer in the FortiManager device-level database of FortiGate. They reinstall the policy package to the managed FortiGate device without any errors. However, when the administrator logs in to FortiGate, they do not see the BGP configuration changes.
What is the most likely reason why FortiManager did not push the BGP peer changes to FortiGate?
- A. Fortigate has a BGP template assigned on the FortiManager database.
- B. The administrator must use the Install Wizard and select Install device settings only to push BGP settings
- C. The FortiGate firmware version is different from the FortiManager ADOM version.
- D. The administrator must run a sanity check on FortiManager to make sure the database is not corrupted.
Answer: A
Explanation:
If a BGP template is assigned to the FortiGate device on FortiManager, device-level BGP configurations made directly in the device-level database are overridden by the template settings, so the changes do not get pushed to the device.
NEW QUESTION # 16
Refer to the exhibit. Which two statements about the output are true? (Choose two.)
- A. The latest revision history for the managed FortiGate does match the FortiManager policy database.
- B. The latest revision history for the managed FortiGate does not match the device-level database.
- C. The system template default will override device-level database configurations.
- D. Configuration changes have been installed on FortiGate, updating policy and device-level database.
Answer: B,C
Explanation:
The status "pending" indicates the latest revision history does not match the device-level database, meaning there are unapplied changes.
The template is marked as [modified], so the system template default will override device-level database configurations when installed.
NEW QUESTION # 17
Refer to the exhibit.
What can you conclude from the downloaded import report?
- A. As a result of this policy import process, FortiManager will create a new firewall address called REMOTE_SUBNET in the ADOM database.
- B. FortiManager will change the configuration of REMOTE_SUBNET to match the interface mapping coming in from Remote-FortiGate.
- C. FortiManager does not support per-device mapping for firewall addresses.
- D. The administrator will see a new policy package named Remote-FortiGate_root in the FortiManager ADOM database.
Answer: D
Explanation:
The import report shows that a new policy package named Remote-FortiGate_root will be created in the FortiManager ADOM database, but some firewall addresses and policies failed to import due to interface binding conflicts.
NEW QUESTION # 18
Company policy dictates that any time a change is made to a policy package on FortiManager an ADOM revision is created before the change installed, and that revision is held for a minimum of 90 days.
Over the past three months, each installed change has resulted in several unused policies and duplicate objects.
The FortiManager administrator plans to upgrade the FortiGate devices and then upgrade the FortiManager ADOM from version 7.4 to 7.6.
Which action can the administrator take to avoid slow ADOM upgrades?
- A. Check and repair the global configuration database before upgrading.
- B. Export firewall policies to Excel, delete them on the ADOM. then reimport them after upgradingthe ADOM.
- C. Limit ADOM revisions before upgrading.
- D. Find unused firmware templates, then delete them before upgrading.
Answer: C
Explanation:
Limiting ADOM revisions reduces the number of stored historical configurations, which helps avoid performance degradation and slow ADOM upgrades caused by a large volume of revisions.
NEW QUESTION # 19
An administrator has a FortiGate-HQ device with VDOMs-root, HR and Facilities, currently managed under the FortiManager ADOM-Site1. They try to move VDOM HR to the FortiManager ADOM-Site2, but it does not work.
Why is the administrator not able to move FortiGate-HQ VDOM HR to FortiManager ADOM-Site2?
- A. The FortiGate-HQ must be managed under the FortiManager ADOM-root to allow moving its VDOMs to different ADOMs.
- B. The administrator must have full access in the device layer of FortiGate-HQ VDOM-root before they can VDOMs to different ADOMs.
- C. FortiManager must be in ADOM normal mode, which does not allow VDOMs to be managed separately.
- D. The administrator must delete the FortiGate-HQ device from FortiManager and add it again using the Add Device wizard before moving the VDOM.
Answer: A
Explanation:
FortiGate devices must be managed under the FortiManager ADOM corresponding to the root VDOM to allow their individual VDOMs to be moved and managed in different ADOMs. Managing the root VDOM in a different ADOM prevents moving subordinate VDOMs across ADOMs.
NEW QUESTION # 20
Refer to the exhibit.
An administrator created two new meta fields in FortiManager.
Which operation can you perform with these parameters?
- A. You can use them as variables in scripts.
- B. You can export them to be used in other ADOMs.
- C. You can add them to objects as custom attributes.
- D. You can invoke them using the $ character.
Answer: C
Explanation:
Meta fields in FortiManager can be added to objects as custom attributes, allowing administrators to categorize and add additional information to firewall objects for easier management and identification.
NEW QUESTION # 21
Refer to the exhibit.
An administrator assigned a new policy package to FortiGate HQ-NGFW-1. In the installation preview, they noticed some settings they did not modify and are unsure about the changes.
Based on the exhibit, which two things will happen if they continue with the installation? (Choose two.)
- A. FortiManager will install the CA certificate named root_CA3 to authenticate FortiGate-to-FortiManager communication protocol (FGFM) tunnel connections with FortiGate HQ- NGFW-1.
- B. FortiGate HQ-NGFW-1 will use the root_CA3 certificate in firewall address objects or policies.
- C. FortiGate HQ-NGFW-1 can use FortiManager firmware templates to upgrade firmware and ratings.
- D. FortiGate HQ-NGFW-1 can contact the FortiManager acting as FortiGuard Distribution Server (FDS) to download FortiGuard updates.
Answer: A,D
Explanation:
The configuration includes a server-list with server-type set to "update rating," which enables FortiGate HQ- NGFW-1 to contact FortiManager as a FortiGuard Distribution Server (FDS) for FortiGuard updates.
The installation includes a root_CA3 certificate, which FortiManager will install on FortiGate HQ-NGFW-1 to authenticate FGFM tunnel connections between the devices.
NEW QUESTION # 22
An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?
- A. Trainer does not have full rights over this ADOM.
- B. Trainer must first create their own workflow session to approve student session.
- C. Trainer is not a part of workflow approval group.
- D. Trainer must close Student's workflow session before approving the request.
Answer: C
Explanation:
An administrator must be part of an approval group, and have rights over the ADOM in which the session was created.
NEW QUESTION # 23
Refer to the exhibit. What will happen if the script is run using the Device Database option?
(Choose two.)
- A. The successful execution of a script on the Device Database will create a new revision history.
- B. You must install these changes using the Install Wizard to a managed device.
- C. The Device Settings Status will be tagged as Modified.
- D. The script history will show successful installation of the script on the remote FortiGate.
Answer: B,C
Explanation:
Once scripts are run on the device database, you can then install the changes on a managed device using the installation wizard.
Since the script changed the device settings in FortiManager, the Config Status shows "Modified" and needs to be installed with Installation Wizard.
NEW QUESTION # 24
The administrator uses FortiManager to push a CLI script using the Remote FortiGate Directly (via CLI) option to configure an IPsec VPN. However, when running the script, the administrator receives the following error:
config vpn ipsec phase2-interface [parameter(s) invalid. detail: object mismatch] What must the administrator do to resolve the script error and successfully apply the IPsec configuration?
- A. Add a second config vpn ipsec phase2-interface block without linking it to phase1.
- B. Use IPsec templates to deploy provisioning templates.
- C. Run the script using the policy package or ADOM database method.
- D. Add the end command after finishing the IPsec phase 1-interface configuration block.
Answer: C
Explanation:
Running the script through the policy package or ADOM database method allows FortiManager to properly interpret object relationships and dependencies in the IPsec configuration, preventing object mismatch errors when pushing complex VPN settings directly via CLI.
NEW QUESTION # 25
Refer to the exhibit.
What are two results from the configuration shown in the exhibit? (Choose two.)
- A. The administrator must have access to the ADOM to approve changes.
- B. The same administrator can lock more than one ADOM at the same time.
- C. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out.
- D. The administrator can lock policy blocks and FortiManager global ADOM.
Answer: C,D
Explanation:
In normal workspace mode, ungraceful session closures will keep the ADOM locked until the session times out, preventing other administrators from editing.
Normal workspace mode allows administrators to lock policy blocks and the global ADOM, providing granular locking control.
NEW QUESTION # 26
Refer to the exhibit. An administrator created two new meta fields in FortiManager.
Which operation can you perform with these parameters?
- A. You can use them as variables in scripts.
- B. You can export them to be used in other ADOMs.
- C. You can add them to objects as custom attributes.
- D. You can invoke them using the $ character.
Answer: C
Explanation:
Meta fields in FortiManager can be added to objects as custom attributes, allowing administrators to categorize and add additional information to firewall objects for easier management and identification.
NEW QUESTION # 27
......
Latest FCP_FMG_AD-7.6 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.validvce.com/FCP_FMG_AD-7.6-exam-collection.html
FCP_FMG_AD-7.6 Exam with Guarantee Updated 47 Questions: https://drive.google.com/open?id=1dcHq9b_8b3U1hfy7yy6jBQpqp4xGYLAJ
