350-401 PDF Dumps Jan 28, 2024 Recently Updated Questions [Q382-Q403]

350-401 PDF Dumps | Jan 28, 2024 Recently Updated Questions

350-401 Exam Questions – Valid 350-401 Dumps Pdf

Cisco 350-401 ENCOR certification exam is a 120-minute exam that consists of 90-110 questions. The questions are a combination of multiple-choice, drag-and-drop, and simulation-based questions. 350-401 exam is computer-based and can be taken at any Pearson VUE testing center around the world.

Why Choose Onpassitsure Cisco Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 Dump?

Effective Learning Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 certification is an essential part of the IT corporate world. Explanation of 350-401 real questions is very important in this regard. The IMINS 350-401 exam dumps are the most reliable source of knowledge in this field.

We guarantee your Cisco 350-401 Exam success with the help of our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 exam dumps. Our 350-401 exam dumpsbase pdf tests will help you pass the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam through your first try. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps have been updated regularly to make sure that it covers the latest 350-401 exam. Cisco 350-401 Dumps are the most reliable solution for your Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam success. We offer you a money-back guarantee if you are not satisfied with our training. Our Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps can clear all your doubts about the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. We have 24/7 online support for Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. We provide a fast download speed of Managing Industrial Networks with the Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. Configuring Cisco IOS Network Devices (ICND) 200-101 Exam PDF is provided in the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 PDF exam dumps.

NEW QUESTION # 382
Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)

A. DHCP Option 43
B. querying other APs
C. broadcasting on the local subnet
D. DNS lookup cisco-DNA-PRIMARY.localdomain
E. Cisco Discovery Protocol neighbour

Answer: A,D

NEW QUESTION # 383
Refer to the exhibit.

Refer to the exhibit. An engineer tries to log in to router R1. Which configuration enables a successful login?
A)

B)

C)

D)

A. Option D
B. Option C
C. Option A
D. Option B

Answer: D

NEW QUESTION # 384
Refer to the exhibit.

Refer to the exhibit. Which action completes the configuration to achieve a dynamic continuous mapped NAT for all users?

A. Increase the NAT pool size to support 254 usable addresses
B. Configure a match-host type NAT pool
C. Reconfigure the pool to use the 192.168 1 0 address range
D. Configure a one-to-one type NAT pool

Answer: A

NEW QUESTION # 385
How does the EIGRP metric differ from the OSPF metric?

A. The EIGRP metric Is calculated based on hop count and bandwidth. The OSPF metric is calculated on bandwidth and delay.
B. The EIGRP metric Is calculated based on bandwidth and delay. The OSPF metric is calculated on bandwidth only.
C. The EIGRP metric is calculated based on delay only. The OSPF metric is calculated on bandwidth and delay.
D. The EIGRP metric is calculated based on bandwidth only. The OSPF metric is calculated on delay only.

Answer: B

NEW QUESTION # 386
Which method
does Cisco DNA Center use to allow management of non-Cisco devices through southbound protocols?

A. It obtains MIBs from each vendor that details the APIs available.
B. It imports available APIs for the non-Cisco device in a CSV format.
C. It uses an API call to interrogate the devices and register the returned data.
D. It creates device packs through the use of an SDK

Answer: C

NEW QUESTION # 387
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?

A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Deny tcp any any eq 80
Permit tcp any any gt 21 it 444
C. Permit tcp any any ne 80
D. Permit tcp any any range 22 443
Deny tcp any any eq 80

Answer: B

NEW QUESTION # 388
Refer to the exhibit. A network engineer must configure NETCONF. After creating the configuration, the engineer gets output from the command show line, but not from show running-config. Which command completes the configuration?

A. Option D
B. Option A
C. Option B
D. Option C

Answer: D

NEW QUESTION # 389
Refer to the exhibit.

Refer to the exhibit. Communication between London and New York is down. Which command set must be applied to the NewYork switch to resolve the issue?

Answer: D

NEW QUESTION # 390
An engineer must configure interface GigabitEthernet0/0 for VRRP group 10. When the router has the highest priority in the group, it must assume the master role. Which command set must be added to the initial configuration to accomplish this task?

A. standby 10 ip 172.16.13.254 255.255.255.0
standby 10 preempt
B. vrrp group 10 ip 172.16.13 254.255.255.255.0
vrrp group 10 priority 120
C. standby 10 ip 172.16.13.254
standby 10 priority 120
D. vrrp 10 ip 172.16.13.254
vrrp 10 preempt

Answer: D

Explanation:
Explanation
In fact, VRRP has the preemption enabled by default so we don't need the vrrp 10 preempt command. The default priority is 100 so we don't need to configure it either. But notice that the correct command to configure the virtual IP address for the group is vrrp 10 ip {ip-address} (not vrrp group 10 ip ...) and this command does not include a subnet mask.

NEW QUESTION # 391
Wireless users report frequent disconnections from the wireless network. While troubleshooting a network engineer finds that after the user a disconnect, the connection re-establishes automatically without any input required. The engineer also notices these message logs .

Which action reduces the user impact?

A. increase the dynamic channel assignment interval
B. enable coverage hole detection
C. increase the AP heartbeat timeout
D. increase BandSelect

Answer: A

Explanation:
Explanation
These message logs inform that the radio channel has
been reset (and the AP must be down briefly). With
dynamic channel assignment (DCA), the radios can
frequently switch from one channel to another but it also
makes disruption. The default DCA interval is 10 minutes,
which is matched with the time of the message logs. By
increasing the DCA interval, we can reduce the number of
times our users are disconnected for changing radio
channels.
One of the best practices to secure REST APIs is using password hash. Passwords must always be hashed to protect the system (or minimize the damage) even if it is compromised in some hacking attempts. There are many such hashing algorithms which can prove really effective for password security e.g. PBKDF2, bcrypt and scrypt algorithms.
Other ways to secure REST APIs are: Always use HTTPS, Never expose information on URLs (Usernames, passwords, session tokens, and API keys should not appear in the URL), Adding Timestamp in Request, Using OAuth, Input Parameter Validation.
Reference: https://restfulapi.net/security-essentials/

NEW QUESTION # 392
At which layer does Cisco DNA Center support REST controls?

A. northbound APIs
B. EEM applets or scripts
C. session layer
D. YAML output from responses to API calls

Answer: A

NEW QUESTION # 393
Refer to the exhibit.

An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required''

A. Add the access-class keyword to the aaa authentication command
B. Add the autocommand keyword to the username command
C. Add the autocommand keyword to the aaa authentication command
D. Add the access-class keyword to the username command

Answer: B

Explanation:
The -autocommand || causes the specified command to be issued automatically after the user logs in. When the command is complete, the session is terminated. Because the command can be any length and can contain embedded spaces, commands using the autocommand keyword must be the last option on the line. In this specific question, we have to enter this line -username CCNP autocommand show running-config ||.

NEW QUESTION # 394
Refer to the exhibit.

A network administrator configured RSPAN to troubleshoot an issue between switchl and switch2. The switches are connected using interface GigabitEthernet 1/1 An external packet capture device is connected to swich2 interface GigabitEthernet1/2 Which two commands must be added to complete this configuration? (Choose two)

A. switch2(config)# monitor session 2 destination vlan 10
B. switch1(config)# interface GigabitEthernet 1/1 switch1(config-if)# switchport mode access switch1(config-if)# switchport access vlan 10 switch2(config)# interface GigabitEthernet 1/1 switch2(config-if)# switchport mode access switch2(config-if)# switchport access vlan 10
C. switch2(config)# monitor session 1 source remote vlan 70 switch2(config)# monitor session 1 destination interface GigabitEthernet1/1
D. switch2(config)# monitor session 1 source remote vlan 70
switch2(config)# monitor session 1 destination interface GigabitEthernet1/2
E. switch2(config-if)# switchport trunk allowed vlan 10,20,30,40,50,60,70-80

Answer: D,E

Explanation:
Switch2 is not allowing VLAN 70 which is used on Switch1 for RSPAN
so we must allow it -> Option B is correct (although it would not allow VLAN 81 to 90 to go through).
"An external packet capture device is connected to switch2 interface GigabitEthernet1/2" so we must configure Gi1/2 as the destination port.
For your information, this is how to configure Remote SPAN (RSPAN) feature on two switches. Traffic on FastEthernet0/1 of Switch 1 will be sent to Fa0/10 of Switch2 via VLAN 40.
+ Configure on both switches
Switch1,2(config)#vlan 40
Switch1,2(config-vlan)#remote-span
+ Configure on Switch1
Switch1(config)# monitor session 1 source interface FastEthernet 0/1
Switch1(config)# monitor session 1 destination remote vlan 40
+ Configure on Switch2
Switch2(config)#monitor session 5 source remote vlan 40
Switch2(config)# monitor session 5 destination interface FastEthernet 0/10

NEW QUESTION # 395
Refer to the exhibit.

These commands have been added to the configuration of a switch. Which command flags an error If It is added to this configuration?

A. monitor session 1 source interface port-channel 7, port-channel 8
B. monitor session 1 source vlan 10
C. monitor session 1 source interface port-channel 6
D. monitor session 1 source interface FastEthernet0/1 rx

Answer: B

Explanation:

RSPAN consists of at least one RSPAN source session, an RSPAN VLAN, and at least one RSPAN destination session. You separately configure RSPAN source sessions and RSPAN destination sessions on different network devices. To configure an RSPAN source session on a device, you associate a set of source ports or source VLANs with an RSPAN VLAN.
Traffic monitoring in a SPAN session has these restrictions: + Sources can be ports or VLANs, but you cannot mix source ports and source VLANs in the same session.
Reference:
Therefore in this question, we cannot configure a source VLAN because we configured source ports for RSPAN session 1 already.

NEW QUESTION # 396
Which technology uses network traffic telemetry, contextual information, and file reputation to provide insight into cyber threats?

A. threat defense
B. segmentation
C. security intelligence
D. security services

Answer: C

NEW QUESTION # 397
Drag and drop the descriptions from the left onto the QoS components on the right.

Answer:

Explanation:

Explanation

The cool thing about shaping is that all traffic will be sent since we are buffering it. The downside of buffering traffic is that it introduces delay and jitter. Let me show you an example:

NEW QUESTION # 398
Refer to the exhibit.

Which type of antenna is shown on the radiation patterns?

A. omnidirectional
B. patch
C. dipole
D. Yagi

Answer: D

NEW QUESTION # 399
Refer to the exhibit.

After configuring HSRP an engineer enters the show standby command. Which two facts are derived from the output? (Choose two.)

A. R2 is using the default HSRP hello and hold timers.
B. R2 becomes the active router after the hold time expires.
C. If Fa0/0 is shut down, the HSRP priority on R2 becomes 80
D. R2 Fa1/0 regains the primary role when the link comes back up
E. The router with IP 10.10 1.3 is active because it has a higher IP address

Answer: A,B

NEW QUESTION # 400

Answer:

Explanation:

NEW QUESTION # 401
Drag and drop the REST API authentication method from the left to the description on the right.

Answer:

Explanation:

NEW QUESTION # 402

Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used