[Aug-2022] Get 100% Real Free DCS-PE DES-1241 Sample Questions
Accurate DES-1241 Questions with Free and Fast Updates
NEW QUESTION 23
Which LED combination shows a connected and working node?
- A. power LED: blinking green fault LED: off
- B. power LED: steady green fault LED: amber
- C. power LED: blinking green fault LED: blue
- D. power: LED: steady green fault LED: off
Answer: B
Explanation:
Explanation
NEW QUESTION 24
What is the protocol used for the storage network?
- A. iSCSI
- B. SMB
- C. FC
- D. NFS
Answer: A
Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf (23)
NEW QUESTION 25
A Storage Administrator needs to address specific fixes within their Dell EMC PowerStore system. Which NDU software upgrade option is used for this situation?
- A. Software releases
- B. Drive firmware
- C. Hotfixes
- D. vCenter
Answer: D
NEW QUESTION 26
What is the alert severity if the license expiration date is within a week?
- A. Major
- B. Information
- C. Minor
- D. Warning
Answer: D
NEW QUESTION 27
A Storage Administrator needs root access. What command needs to be run?
- A. sudo service
- B. svc_inject generate-key --root
- C. svc_inject -root
- D. su - root
Answer: B
NEW QUESTION 28
What describes the power requirements for Dell EMC PowerStore?
- A. Lower model numbered systems require less AC line current than higher model numbered systems
- B. X models require less total power than T models
- C. T models require less total power than X models
- D. Lower model numbered systems require less input voltage (VAC) than higher model numbered systems
Answer: A
Explanation:
Maximum input power 240 VAC ± 10%, single phase For 100-120V, a customer-supplied step-up transformer is required AC Line Current (operating maximum at 200 VAC) 8.1 A 8.1 A 9.0 A 9.0 A 9.3 A 10.4 A https://www.dell.com/support/manuals/en-us/powerstore-5000/pwrstr-plang/power-requirements-for-powerstore-x-model-and-powerstore-t-model?guid=guid-21e142df-e22c-4bbc-8978-7c6124753654&lang=en-us
NEW QUESTION 29
Refer to the exhibit.
What is indicated when the circled LED on the base enclosure is illuminated amber?
- A. Cluster discovery state
- B. Cluster service mode
- C. Base enclosure power-on
- D. Base enclosure fault
Answer: C
NEW QUESTION 30
Refer to the exhibit.
A Storage Administrator noticed a solid amber LED. What does this mean?
- A. Power up
- B. Drive identification on
- C. Drive rebuilding
- D. Drive faulted
Answer: D
NEW QUESTION 31
A Storage Administrator ran a PSTCLI command on a Linux host. The error " -bash: pstcli: command not found" appears. How is the problem resolved?
- A. Add /opt/dellemc/pstcli/bin/ in PSTCLI.sh
- B. Add the installation directory to the PATH variable on shell initialization file
- C. Install in default directory /opt/dellemc/pstcli-version/bin/
- D. Run rpm -ihv pstcli to reinstall the PSTCLI software on the Linux host
Answer: B
NEW QUESTION 32
What is the maximum number of base enclosures in a cluster when planning a Dell EMC PowerStore T installation?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf
NEW QUESTION 33
How many fan module failures can a node tolerate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h18149-dell- emc-powerstore-platform-introduction.pdf (14)
NEW QUESTION 34
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?
- A. If NAS servers are present if they are either NFS or Licensed
- B. Memory utilization and thread count for NFS NAS servers
- C. If NAS servers are present and if they are either Started or Degraded
- D. SIDs of SMB NAS servers joined to the AD Domain
Answer: C
NEW QUESTION 35
A Storage Administrator notices two fans in a Dell EMC PowerStore are faulted. What describes the system behavior in this circumstance?
- A. A five-minute timer starts upon the second fan fault and the system shuts down automatically after the timer expires
- B. An increased fan speed signal is sent to the surviving fans and the system continues normal operations
- C. CPU clock speed is reduced by 50% to lower internal temperatures and the system continues normal operations
- D. Upon the second fan fault, all host I/O is terminated immediately and the PowerStore goes through the halt and vault process and shuts down
Answer: A
NEW QUESTION 36
Which port is used to SSH from one Dell EMC PowerStore appliance to another?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 37
A Storage Administrator has just installed PSTCLI on a Linux client. The administrator is unfamiliar with the PSTCLI command list. How can the administrator get a list of all PSTCLI commands from the cli> prompt?
- A. Use the show all command
- B. Press the <Tab> key
- C. Use the help all command
- D. Type the <Ctrl>+keys together
Answer: C
Explanation:
https://dl.dell.com/topicspdf/pwrstr-cliug_en-us.pdf
NEW QUESTION 38
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?
- A. Memory utilization and thread count for NFS NAS servers
- B. If NAS servers are present and if they are either Started or Degraded
- C. If NAS servers are present if they are either NFS or Licensed
- D. SIDs of SMB NAS servers joined to the AD Domain
Answer: C
NEW QUESTION 39
Which network traffic is encrypted using IPsec?
- A. ICD network
- B. OOB network
- C. Inter-node network
- D. ICM network
Answer: D
NEW QUESTION 40
......
DES-1241 Study Guide Realistic Verified Dumps: https://www.validvce.com/DES-1241-exam-collection.html
Self-Study Guide for Becoming an Specialist - Platform Engineer, PowerStore Exam Expert: https://drive.google.com/open?id=163AZyS6d6yTPBfxsg5RmZU_AvSuP2AOi
