CWDP Wi-Fi Design Certification CWDP-303 Sample Questions Reliable
Prepare for the Actual CWDP Wi-Fi Design CWDP-303 Exam Practice Materials Collection
Difficulty in writing CWDP-303 Exam
Candidates face many problems when they start preparing for the CWNP CWDP-303 exam. If a candidate wants to prepare his for the CWNP CWDP-303 exam without any problem and get good grades in the exam. Then they have to choose the best CWNP CWDP-303 exam dumps for real exam questions practice. There are many websites that are offering the latest CWNP CWDP-303 exam questions and answers but these questions are not verified by CWNP certified experts and that's why many are failed in their just first attempt. ValidVCE is the best platform which provides the candidate with the necessary CWNP CWDP-303 questions that will help him to pass the CWNP CWDP-303 exam on the first time. The candidate will not have to take the CWNP CWDP-303 exam twice because with the help of CWNP CWDP-303 exam dumps Candidate will have every valuable material required to pass the CWNP CWDP-303 exam. We are providing the latest and actual questions and that is the reason why this is the one that he needs to use and there are no chances to fail when a candidate will have valid braindumps from ValidVCE. We have the guarantee that the questions that we have will be the ones that will pass candidate in the CWNP CWDP-303 exam in the very first attempt.
What Next after Certification?
The CWNP certification plan allows for progression if you wish to proceed and make your profession even stronger through accumulating more skills. The CWDP is a professional certification, and when you earn it, you acquire the credits necessary for achieving the CWNE certificate. Achieving this expert-level validation requires one to have the CWNA, CWSP, CWDP, CWAP, and CWISA certifications.
NEW QUESTION 31
After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all. You checked the WLAN infrastructure and all APs are up and running and you've validated coverage after deployment. What is causing this issue?
- A. His tablet does not support one or more of the 5 GHz channels
- B. His tablet doesn't support MU-MIMO
- C. His tablet doesn't support the 5 GHz band
- D. His tablet only supports a 40 MHz channel-width
Answer: B
NEW QUESTION 32
Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 33
What document should be created that provides instructions for install technicians to mount and configure APs?
- A. Bill of Materials
- B. Hold Harmless
- C. Statement of Work
- D. Physical installation guide
Answer: D
NEW QUESTION 34
You are validating association capabilities from clients to an 802.1X/EAP secure SSID. The RADIUS server's IP address is 10.100.50.25 and the default RADIUS authentication port is used. When testing them, none of the clients are able to associate to the SSID. Troubleshooting the WLAN infrastructure, you found out that the server is up and the RADIUS service is up as well, but the authenticator is not able to communicate properly with the server. What's your next troubleshooting step?
- A. Reboot the clients
- B. Restart the RADIUS service
- C. Verify that the shared secret between the authenticator and the RADIUS server is correct
- D. Reboot the server
Answer: C
NEW QUESTION 35
A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not be forgotten by their Wireless Engineer when considering the Fresnel Zone?
- A. FSPL
- B. Antenna gain
- C. Receive sensitivity
- D. Earth bulge
Answer: D
Explanation:
Explanation/Reference:
Reference: http://www.zytrax.com/tech/wireless/fresnel.htm
NEW QUESTION 36
Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based type of authentication where both the client and server require certificates. Which EAP type would be the best fit?
- A. PEAP
- B. EAP-FAST
- C. EAP-TLS
- D. EAP-TTLS
Answer: C
Explanation:
Explanation/Reference:
Reference: https://www.intel.com/content/www/us/en/support/articles/000006999/network-and-i-o/wireless- networking.html
NEW QUESTION 37
You're about to deploy an Enterprise-class VoWLAN infrastructure. You need to ensure that QoS is properly configured throughout the network. What Access Category (AC) should voice frames/packets use?
- A. AC_BK
- B. AC_VO
- C. AC_VI
- D. AC_BE
Answer: B
Explanation:
Explanation/Reference: http://support.huawei.com/enterprise/docinforeader!loadDocument1.action?
contentId=DOC1000019455&partNo=10022
NEW QUESTION 38
What kind of site survey helps you identify if roaming is working as designed?
- A. Passive
- B. Predictive
- C. Spectrum analysis walkthrough
- D. Active
Answer: A
Explanation:
Explanation/Reference:
Reference: http://revolutionwifi.blogspot.com/2013/
NEW QUESTION 39
Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EAP method would be the best fit for their requirement?
- A. EAP-FAST
- B. EAP-TLS
- C. EAP-TTLS
- D. LEAP
Answer: B
Explanation:
Explanation/Reference: https://support.microsoft.com/en-gb/help/814394/certificate-requirements-when-you-use-eap-tls-or- peap-with-eap-tls
NEW QUESTION 40
What limitation exists when WMM is not enabled on an 802.11n WLAN?
- A. 802.11 QoS will not be available
- B. The maximum channel-width will be 20MHz
- C. EDCA values will change
- D. Only two ACs will be available
Answer: A
NEW QUESTION 41
An engineering firm just upgraded their WLAN form nine 802.11n APS to nine 802.11ac APs. After this upgrade, they did not see any improvement in throughput. What is the most likely cause of this result?
- A. The clients were not upgraded
- B. The APs are still using the 5 GHz lower band
- C. APs are transmitting at a low transmit power
- D. APs are mounted on the wall
Answer: C
NEW QUESTION 42
You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?
- A. Low gain antennas
- B. Indoor APs
- C. Low power APs
- D. Personal Protective Equipment (PPE)
Answer: D
NEW QUESTION 43
During a validation site survey, you realize that the installers mounted some of the APs above the ceiling. They said that this was a request from the building architect due to aesthetics constraints. During the requirements gathering, you weren't advised about any aesthetics constraints from the main stakeholder of the project. What should you do in this case?
- A. Leave it as it is and allow automatic channel management to correct any issues.
- B. Advise the stakeholder that WLAN performance requirements will not be met and a new design process will be needed to meet the requirements.
- C. Remove all external antennas and use only the internal antennas to reduce multipath.
- D. Increase the output power on all APs by 6 dB immediately.
Answer: B
NEW QUESTION 44
What kind of site survey helps you identify if roaming is working as designed?
- A. Passive
- B. Predictive
- C. Spectrum analysis walkthrough
- D. Active
Answer: A
NEW QUESTION 45
Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use to directly address their concern?
- A. NDA
- B. Hold Harmless
- C. BoM
- D. SoW
Answer: A
NEW QUESTION 46
After designing and deploying a WLAN infrastructure, you realized the CCI is causing poor performance in the 2.4 GHz band. Primarily, you've designed the WLAN for 5 GHz and 2.4 GHz as a best effort. You found out that the implementers didn't follow your guidelines when configuring the WLAN infrastructure.
What can you do to minimize as much as possible the CCI impact in the 2.4 GHz band?
- A. Turn-off 2.4 GHz radios on some APs
- B. Increase the transmit power on all APs
- C. Add more APs to the infrastructure
- D. Use all channels available in the 2.4 GHz band
Answer: A
NEW QUESTION 47
You have performed a validation site survey after deploying a WLAN infrastructure that is an All-Wireless- Office. One specific application of your customer is experiencing delay when using the application after moving from wired connectivity. After your validation, you realized that all APs are using 80 MHz channel- widths instead of 20 MHz on the 5 GHz band, as it was designed. What can be done to resolve the delay on this application?
- A. APs should be using 160 MHz channel-widths to get more throughput
- B. Add more APs using 80 MHz channel-widths
- C. Power-off half of the APs to reduce CCI and keep 80 MHz channel-widths
- D. Reconfigure to use 20 MHz channel-widths, so reuse of the frequency is more effective
Answer: D
NEW QUESTION 48
Which DHCP option, when required, should be configured and enabled to help APs locate their wireless LAN controller?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/ c70wlan.html
NEW QUESTION 49
......
Ace CWNP CWDP-303 Certification with Actual Questions Oct 10, 2022 Updated: https://www.validvce.com/CWDP-303-exam-collection.html
