Free Feb-2023 UPDATED Cisco 300-620 Exam Questions & Answer [Q69-Q85]

Share

Free Feb-2023 UPDATED Cisco 300-620 Exam Questions & Answer

Latest Success Metrics For Actual 300-620 Exam Realistic Dumps


What is the cost of Implementing Cisco Application Centric Infrastructure (300-620 DCACI)

  • Length of Examination: 120 minutes
  • Number of Questions: 90-105
  • Format: Multiple choices, multiple answers
  • Passing Score: 70%

 

NEW QUESTION 69
An engineer needs to deploy a leaf access port policy group in ACI Fabric to support the following requirements:
* Control the amount of application data flowing into the system
* Allow the newly connected device to auto-negotiate link speed with the leaf switch Which two ACI policies must be configured to achieve these requirements? (Choose two.)

  • A. ingress data plane policing policy
  • B. ingress control plane policing policy
  • C. L2 interface policy
  • D. slow drain policy
  • E. link level policy

Answer: A,E

Explanation:
Explanation

Slow Drain handles FCoE packets that are causing traffic congestion on ACI fabric. So, it is wrong.
Ingress control plane is wrong, because the request is for "application data flowing".
L2 interface policy is concerned about QinQ and VLAN scope.

 

NEW QUESTION 70
A customer must deploy three Cisco ACI based data centers. Each site must be separated from the others. Which characteristic of Cisco ACI Multi-Pod makes it unsuitable for this deployment?

  • A. has distance and scale limitations
  • B. creates a virtual pod in the remote location
  • C. places leaf switches in the remote site that belong to the same fabric as at the headquarters site
  • D. requires all pods to share the same Cisco APIC cluster

Answer: D

 

NEW QUESTION 71
In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?

  • A. Endpoint information is not exchanged across sites unless COOP protocol is used.
  • B. Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.
  • C. Endpoint information is exchanged across sites when the endpoints are discovered in both sites.
  • D. Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.

Answer: B

 

NEW QUESTION 72
Drag and drop the Cisco ACI Layer 4 to Layer 7 service insertion terms on the left to the correct descriptions on the right.

Answer:

Explanation:

 

NEW QUESTION 73
Refer to the exhibit.

Refer to the exhibit. An engineer configures communication between the EPGs in different tenants. Which action should be taken to create the subnet?

  • A. Leave Scope set to Private to VRF.
  • B. Add the L3Out for Route Profile value.
  • C. Change Scope to Shared between VRFs.
  • D. Change Scope to Advertised Externally.

Answer: C

 

NEW QUESTION 74
In-band is currently configured and used to manage the Cisco ACI fabric. The requirement is for leaf and spine switches to use out-of-band management for NTP protocol. Which action accomplishes this goal?

  • A. Create an Override Policy with NTP Out-of-Band for leaf and spine switches.
  • B. Change the interface used for APIC external connectivity to ooband.
  • C. Add a new filter to the utilized Out-of-Band-Contract to allow NTP protocol.
  • D. Select Out-of-Band as Management EPG in the default DateTimePolicy.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/200128-Configuring-NTP-in-ACI-Fabric-Solution.html

 

NEW QUESTION 75
A Solutions Architect is asked to design two data centers based on Cisco ACI technology that can extend L2/ L3, VXLAN, and network policy across locations. ACI Multi-Pod has been selected. Which two requirements must be considered in this design? (Choose two.)

  • A. A single APIC Cluster is required in a Multi-Pod design. It is important to place the APIC Controllers in different locations in order to maximize redundancy and reliability.
  • B. Multi-Pod requires multiple APIC Controller Clusters, one per pod. Make sure those clusters can communicate to each other through a highly available connection.
  • C. ACI Multi-Pod requires an IP Network supporting PIM-Bidir.
  • D. ACI Multi-Pod does not support Firewall Clusters across Pods. Firewall Clusters should always be local.
  • E. ACI underlay protocols, i.e. COOP, IS-IS and MP-BGP, spans across pods. Create QoS policies to make sure those protocols have higher priority.

Answer: B,E

 

NEW QUESTION 76
Refer to the exhibit.

Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)

  • A. Leaf1
  • B. Leaf2
  • C. Spine1
  • D. apic2
  • E. Spine2
  • F. apic1

Answer: C,E

 

NEW QUESTION 77
Refer to the exhibit.

Refer to the exhibit. What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?

  • A. precise filter to allow only HTTP traffic
  • B. contract with no filter
  • C. contract filter to allow ARP and HTTP.
  • D. permit-all contract filter

Answer: C

 

NEW QUESTION 78
Where is the COOP database located?

  • A. leaf
  • B. spine
  • C. endpoint
  • D. APIC

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739989.html

 

NEW QUESTION 79

Refer to the exhibit. Which two components should be configured as route reflectors in the ACI fabric?
(Choose two.)

  • A. Leaf1
  • B. Leaf2
  • C. Spine1
  • D. apic2
  • E. Spine2
  • F. apic1

Answer: C,E

Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference:

 

NEW QUESTION 80
Refer to the exhibit.

Which two objects are created as a result of the configuration? (Choose two.)

  • A. VRF
  • B. bridge domain
  • C. application profile
  • D. endpoint group
  • E. attachable AEP

Answer: A,B

 

NEW QUESTION 81
A customer migrates a legacy environment to Cisco ACI. A Layer 2 trunk is configured to interconnect the two environments. The customer also builds ACI fabric in an application-centric mode. Which feature should be enabled in the bridge domain to reduce instability during the migration?

  • A. Set Multi-Destination Flooding to Flood in BD.
  • B. Set Multi-Destination Flooding to Flood in Encapsulation.
  • C. Enable Flood in Encapsulation.
  • D. Disable Endpoint Dataplane Learning

Answer: A

 

NEW QUESTION 82
An application team tells the Cisco ACI network administrator that it wants to monitor the statistics of the unicast and BUM traffic that are seen in a certain EPG. Which statement describes the collection statistics?

  • A. EPG statistics can be collected only for VMM domains. If a physical domain exists, statistics are not collected.
  • B. The collection of statistics is enabled on the EPG level by enabling the statistics for unicast and BUM traffic.
  • C. All EPGs in the Cisco ACI tenant object must be enabled for statistics to be collected.
  • D. Cisco ACI does not capture statistics at the EPG level. Only statistics that pass through ACI contracts can be monitored.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/Operating_ACI/guide/b_Cisco_Operating_ACI/b_Cisco_Operating_ACI_chapter_01011.html

 

NEW QUESTION 83
Which type of port is used for in-band management within ACI fabric?

  • A. APIC console port
  • B. management port
  • C. spine switch port
  • D. leaf access port

Answer: A

 

NEW QUESTION 84
Refer to the exhibit.

Which two objects are created as a result of the configuration? (Choose two.)

  • A. VRF
  • B. bridge domain
  • C. application profile
  • D. endpoint group
  • E. attachable AEP

Answer: A,B

 

NEW QUESTION 85
......


Understanding functional and technical aspects of Implementing Cisco Application Centric Infrastructure (300-620 DCACI) ACI Anywhere

The following will be discussed in CISCO 300-620 exam dumps:

  • Describe multisite
  • Familiarity with Cisco Ethernet switching products
  • Describe VMM Integration
  • Describe external network connectivity
  • Describe Cisco ACI basic packet forwarding
  • Familiarity with virtualization fundamentals
  • Describe Cisco ACI policy model logical constructs
  • Describe Cisco ACI Fabric Infrastructure and basic Cisco ACI concepts

Exam Outline

The Cisco 300-620 exam equips the professionals with the skills required to install, configure, and maintain data center technology. The content of this test revolves around six domains that are listed below:

  • ACI Management (20%)
  • ACI Packet Forwarding (15%)
  • Integrations (15%)
  • ACI Anywhere (10%)

 

Updated 300-620 Dumps Questions For Cisco Exam: https://www.validvce.com/300-620-exam-collection.html

Best Value Available Preparation Guide for 300-620 Exam: https://drive.google.com/open?id=1KIwiw9yPchvX3bROIY8Zt9CoEUw7Zez2