Get New 2022 Valid Practice CCNP Enterprise 300-430 Q&A - Testing Engine
300-430 Dumps PDF - 100% Passing Guarantee
Cisco 300-430: Career Paths + Opportunities + Salary
Passing the Cisco 300-430 exam to obtain the CCNP Enterprise certification means that the professionals have already formed strong skills in providing wireless-based enterprise solutions. This opens great doors in global organizations, such as AT&T Inc, Cisco Systems, Amazon, and others. Some of the titles associated with this certificate are a Network Administrator, a Network Architect, a Network Engineer, a Network Security Engineer, and an IT Director. The average pay for the certified specialists is about $96,000 per year.
This Cisco certification path gives the eligible professionals the freedom to further develop their skills. Since it is from the Professional level, the next stride is to get an expert-level certificate. You can choose CCIE Enterprise Infrastructure or CCIE Enterprise Wireless based on your preferences. It will enhance your career even better and offer you increased chances in the IT sphere.
NEW QUESTION 39
After looking in the logs, an engineer notices that RRM keeps changing the channels for non-IEEE 802. 11 interferers. After surveying the area, it has been decided that RRM should not change the channel. Which feature must be enabled to ignore non-802.11 interference?
- A. Avoid Foreign AP Interference
- B. Avoid Persistent Non-WIFI Interference
- C. Avoid Non-802. 11 Noise
- D. Avoid Cisco AP Load
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configure-guide/b_wi_16_10_cg/radio-resource-
NEW QUESTION 40
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
- A. config flexconnect group BranchA-FCG vlan 30 add
- B. config flexconnect group BranchA-FCG vlan add 30
- C. config flexconnect BranchA-FCG vlan 30 add
- D. config flexconnect BranchA-FCG vlan add 30
Answer: B
Explanation:
NEW QUESTION 41
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Note: To enable Local switching, you have to disable central switching
Answer: D
NEW QUESTION 42
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?
- A. RF Profile
- B. Flex Profile
- C. Policy Profile
- D. AP Join Profile
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/configguide/b_wl_16_10_cg/flexconnect.html
NEW QUESTION 43
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.1.39
- B. 224.0.1.40
- C. 224.0.0.13
- D. 224.0.0.14
Answer: A,B
NEW QUESTION 44
An engineer must achieve the highest level of location accuracy possible for a new mobile application. Which technology must be implemented for this use case?
- A. ToA lateration
- B. Bluetooth Low Energy
- C. Time Difference of Arrival
- D. RSS lateration
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBSDG/wifich2.html
NEW QUESTION 45
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
- A. 10 seconds
- B. 30 seconds
- C. 15 seconds
- D. 60 seconds
Answer: C
Explanation:
NEW QUESTION 46
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow SNMP traffic only before authentication and block all the traffic.
- B. Allow all the traffic before authentication and intercept HTTPS only.
- C. Allow all the traffic before authentication and intercept HTTP only.
- D. Allow HTTPs traffic only before authentication and block all other traffic.
- E. Allow HTTP traffic only before authentication and block all the traffic.
Answer: C,D
Explanation:
NEW QUESTION 47
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow SNMP traffic only before authentication and block all the traffic.
- B. Allow all the traffic before authentication and intercept HTTPS only.
- C. Allow all the traffic before authentication and intercept HTTP only.
- D. Allow HTTPs traffic only before authentication and block all other traffic.
- E. Allow HTTP traffic only before authentication and block all the traffic.
Answer: C,D
Explanation:
NEW QUESTION 48
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)
- A. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
- B. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
- C. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
- D. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
- E. NTP can be configured, but that is not recommended.
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html
NEW QUESTION 49
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Disable DHCP proxy on the Cisco WLC.
- B. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- C. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
- D. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
Answer: D
NEW QUESTION 50
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Create an ACL for WebEx
- B. Change the AVC application WebEx-app-sharing to mark
- C. Create an AVC profile for WebEx
- D. Change the WLAN reserved bandwidth for WebEx
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION 51
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: C
NEW QUESTION 52
A wireless network has been implemented to enable multicast video to be streamed reliably over the wireless link to the wireless to the wireless users. After a client reports that the video is unable to stream the administrator determines that the client is connecting a data rate of 12 Mbps and is trying to stream to a void multicast address on the network. Which two actions must be applied? (Choose two.)
- A. Change the WLAN QoS value to Bronze for the WLAN that multicast will be enabled.
- B. Allow RTSP to stream the video due to wireless multicast not using acknowledgements.
- C. Turn off IGMP snooping for all the configured WLANs on the controller.
- D. Implement video-stream for the multicast video on the controller.
- E. Allow multicast-direct to work correctly and multicast-direct to be enabled globally.
Answer: D,E
NEW QUESTION 53
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. permit-ACL
- B. mark
- C. WMM required
- D. rate-limit
Answer: B
NEW QUESTION 54
The network management team in a large shopping center has detected numerous roque APs from local coffee shops that are broadcasting SSIDs. All of these SSlDs have names starting with ATC (for example. ATC302.
ATC011. and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION 55
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode floods. Dense mode uses distribution trees.
- B. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
- C. Sparse mode uses distribution trees. Dense mode floods.
- D. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te
NEW QUESTION 56
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. broadcast forwarding
- B. multicast AP multicast mode
- C. controller IGMP snooping
- D. unicast AP multicast mode
Answer: B
Explanation:
Note: The question is about the reason behind CPU hike, it is not asking the solution for the issue
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html
NEW QUESTION 57
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. TACACS+
- B. LDAP
- C. RADIUS
- D. network policy server
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_161/ConfigExamples_Technotes/Techzone_Articles
NEW QUESTION 58
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired and wireless devices
- B. Cisco certified wireless devices
- C. wireless devices
- D. wired devices
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION 59
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
"A FlexConnect group can have one primary AP per AP model. If a primary AP is not selected manually, the AP that has the least MAC address value is automatically chosen as the primary AP for that model."
NEW QUESTION 60
Which type of information should be included in an installation report?
- A. The exact number of users the WLAN will support.
- B. A complete characterization of the external WLAN environment.
- C. A detailed description of the WLAN environment during the post-installation testing, for example, number of people present, furniture, no furniture, and sources of interference present.
- D. Soft copies of configuration for switches, routers, controllers, and location appliances.
Answer: D
NEW QUESTION 61
......
300-430 Braindumps Real Exam Updated on Oct 19, 2022 with 160 Questions: https://www.validvce.com/300-430-exam-collection.html
Latest 300-430 PDF Dumps & Real Tests Free Updated Today: https://drive.google.com/open?id=1kqFItiIXqBJXk1pTKEawG7er8lWIYD_9
