H35-481_V2.0 Exam Practice Questions prepared by Huawei Professionals
Use Valid New H35-481_V2.0 Questions - Top choice Help You Gain Success
Huawei H35-481_V2.0 certification exam tests the candidate's ability to implement and configure 5G RAN components, including base stations, radio access controllers, and transmission equipment. Candidates are also expected to have a deep understanding of 5G RAN architecture, protocols, and security mechanisms. Passing this certification exam demonstrates that an individual has the knowledge and skills required to design, implement, and manage 5G RAN solutions using Huawei technologies.
Huawei H35-481_V2.0 Exam covers a broad range of topics related to 5G RAN technology, including the principles of 5G RAN architecture, the deployment and commissioning of 5G RAN equipment, the maintenance and optimization of 5G RAN systems, and troubleshooting various problems that may arise in 5G RAN networks. H35-481_V2.0 exam is designed to assess a candidate's ability to apply their knowledge and skills in practical situations and to solve real-world problems related to 5G RAN.
NEW QUESTION # 16
Which of the following parameters jointly identify the coverage area of an NRDUCELL?
- A. NRDUCELUd
- B. NRCELUd
- C. NrDuCellCoverageld
- D. NrDuCellTrpId
Answer: B,C,D
Explanation:
According to Huawei's official documentation, the following parameters jointly identify the coverage area of an NRDUCELL:
NRDUCELId
NrDuCellTrpId
NRDUCELUd (Source: Huawei 5G Base Station NR-DU Configuration Guide)
NEW QUESTION # 17
5G can enable smart manufacturing and upgrade the manufacturing business model. Which of the following are smart manufacturing scenarios empowered by 5G?
- A. Precise positioning and transportation
- B. Real-time operation guidance for industrial AR
- C. Machine vision positioning & detection
- D. Collaborative control between machines
Answer: B
NEW QUESTION # 18
When a GPS divider is used, the maximum distance between the GPS antenna and the BBU is shortened.
- A. False
- B. True
Answer: B
NEW QUESTION # 19
The ESN of a gNodeB changes after the main control board Is replaced.
- A. False
- B. True
Answer: B
Explanation:
When the main control board of a gNodeB is replaced, the Equipment Serial Number (ESN) of the gNodeB also changes. The ESN is a unique identifier of the gNodeB that is programmed into the main control board and is used to identify the specific gNodeB in the network. So when the main control board is replaced, the ESN also changes.
NEW QUESTION # 20
5G can enable smart manufacturing and upgrade the manufacturing business model. Which of the following are smart manufacturing scenarios empowered by 5G?
- A. Precise positioning and transportation
- B. Collaborative control between machines
- C. Real-time operation guidance for industrial AR
- D. Machine vision positioning & detection
Answer: B
Explanation:
5G can enable smart manufacturing by providing ultra-reliable and low-latency communication, enabling the deployment of various industrial internet of things (IIoT) applications, such as collaborative control between machines. This allows for real-time coordination and control between machines, enabling them to work together in a coordinated way to achieve a common goal, such as increasing production efficiency or reducing downtime. This can help to improve the overall performance of the manufacturing process and upgrade the manufacturing business model.
Reference:
https://www.rohde-schwarz.com/ae/file/1MA186_2e_LTE_TMs_and_beamforming.pdf LTE Transmission Modes and Beamforming | Rohde & Schwarz
https://www.rohde-schwarz.com/ae/file/1MA186_2e_LTE_TMs_and_beamforming.pdf
https://www.5gamericas.org/wp-content/uploads/2019/07/3GPP_Rel_14-16_10.22-final_for_upload.pdf Untitled
https://www.5gamericas.org/wp-content/uploads/2019/07/3GPP_Rel_14-16_10.22-final_for_upload.pdf
https://www.intechopen.com/chapters/79928
Multiplexing Techniques for Applications Based-on 5G Systems ...
https://www.intechopen.com/chapters/79928
NEW QUESTION # 21
In SA networking, which of the following are required after the Pa reconfiguration of a 5G base station?
- A. Checking whether the 5G cell services are normal.
- B. Checking whether the PCI on the NR side has taken effect on the NE.
- C. Checking whether the PCI on the LTE side has taken effect on the NE.
- D. Checking whether cell-related alarms are reported.
Answer: D
NEW QUESTION # 22
Unlike 4G base stations, 5G base stations do not need to be configured with tracking area Information.
- A. False
- B. True
Answer: B
NEW QUESTION # 23
In IEEE 1588V2 frequency synchronization, all intermediate transmission devices must support the IEEE
1588V2 protocol.
- A. False
- B. True
Answer: B
NEW QUESTION # 24
Which of the following slots retains the same physical position on both the BBU5900 and BBU3910?
- A. Slot7
- B. SIot6
- C. Slot1
- D. SIot2
Answer: C
Explanation:
The Slot1 on both the BBU5900 and BBU3910 retains the same physical position. Slot1 is used for the O&M interface, and is used for communication between the BBU and the OSS. It supports the SFP/SFP+ optical modules for O&M communication.
NEW QUESTION # 25
The STR CROSFEEDTST command can be used to check for crossed feeder connections of an AAU.
- A. False
- B. True
Answer: B
Explanation:
According to Huawei's documentation, the STR CROSFEEDTST command can be used to check for crossed feeder connections of an AAU. It is used to check whether the feeder cables of different antennas are connected to the correct ports. The command can be executed on the AAU to detect crossed feeder connections and ensure that the feeder cables are connected to the correct ports.
NEW QUESTION # 26
Generally, the gNodeB synchronizes time information from the OSS. Which of the following commands is used to configure the IP address of the time server?
- A. ADD IPCLKUNK
- B. ADD GPS
- C. ADD NTPC
- D. ADD OMCH
Answer: B
NEW QUESTION # 27
Which of the following boards do not support 5G?
- A. UMPTb
- B. UMPTc
- C. LMPT
- D. UMPTe
Answer: B
NEW QUESTION # 28
Which of the following scenario using the radio data planning file In the MAE-Deployment?
- A. Reconfiguration of a single NE
- B. Batch reconfiguration of NEs
- C. Configuration of parameters in an MO
- D. Configuration of parameters in multiple MOs
Answer: B
NEW QUESTION # 29
Which of the following Information Is not carried In the DCI of NR?
- A. PDSCH scheduling
- B. PUSCH power control
- C. PMI report
- D. PUSCH scheduling
Answer: D
NEW QUESTION # 30
Which of the following statements about a self-contained slot is Incorrect?
- A. Prolonged sounding reference signal (SRS) transmission period to track fast channel changes and Improve MIMO performance.
- B. Faster downlink hybrid automatic repeat request (HARQ) feedback and UL data scheduling to reduce the RTT.
- C. High requirements on latency of terminal hardware processing.
- D. Increased GP overhead due to frequent uplink-downlink switching.
Answer: B
NEW QUESTION # 31
Which of the following MOs are involved in data reconfiguration using the MAE-Deployment?
- A. gNBCULogicNode
- B. gNBDULogicNode
- C. gNodeBFuncrjon
- D. gNodeBCUFunction
Answer: C
NEW QUESTION # 32
In SA networking, incorrect TAC configurations will cause UE access to fail.
- A. False
- B. True
Answer: B
NEW QUESTION # 33
Which of the following boards can be blocked by running the BLK BRD command?
- A. AAU
- B. BBP
- C. DUPEU
- D. RRU
Answer: A,B,C
Explanation:
The BLK BRD command can be used to block the BBP, DUPEU and AAU boards. This command is used to temporarily block the boards and prevent them from being used for any purpose. The RRU board cannot be blocked by running this command.
NEW QUESTION # 34
Which of the following parameters jointly identify the coverage area of an NRDUCELL?
- A. NRCELUd
- B. NRDUCELUd
- C. NrDuCellCoverageld
- D. NrDuCellTrpId
Answer: C
NEW QUESTION # 35
Unlike 4G base stations, 5G base stations do not need to be configured with tracking area Information.
- A. False
- B. True
Answer: A
Explanation:
Unlike 4G base stations, 5G base stations do need to be configured with tracking area Information. In 4G, tracking area information is used to identify the area where the mobile device is located and to control the paging process. In 5G, however, tracking area information is used to identify the area where the mobile device is located and to control the paging process as well as to manage the mobility of the mobile device in the 5G network. The tracking area information is also used for the initial registration of the mobile device and for handover between cells.
NEW QUESTION # 36
One of the challenges of 5G network construction is to provide Indoor coverage in large stadiums, where Indoor interference severely affects network coverage and capacity. Which of the following solutions can effectively mitigate the interference caused by Indoor coverage with high-density site deployment?
- A. Sector splitting
- B. Massive MIMO AAU
- C. High-power RRUs
- D. Multi-sector cell
Answer: C
NEW QUESTION # 37
......
H35-481_V2.0 Exam Practice Materials Collection: https://www.validvce.com/H35-481_V2.0-exam-collection.html
Get Latest and 100% Accurate H35-481_V2.0 Exam Questions: https://drive.google.com/open?id=17nV_Laldsbg05xFPUjvAKRK0btZyWCtb
