[Jan 13, 2022] JN0-1332 Exam Dumps PDF Updated Dump from ValidVCE Guaranteed Success
Pass Your Juniper Exam with JN0-1332 Exam Dumps
NEW QUESTION 37
Physical security devices are ''blind'' to which type of traffic?
- A. intra-server traffic
- B. private VLAN
- C. management
- D. bare metal server to VM
Answer: B
NEW QUESTION 38
You are designing a service provider network. As part of your design you must ensure that the OSPF, BGP, and RSVP protocol communications are secured using the same authentication method. Which authentication protocol will accomplish this task?
- A. SHA-256
- B. HMAC-MD5
- C. simple authentication
- D. SHA-RSA
Answer: C
NEW QUESTION 39
Which type of SDN implementation docs Contrail use?
- A. OpenFlow
- B. SDN using API
- C. Overlay SDN
- D. open SDN
Answer: D
NEW QUESTION 40
You must ensure that all 10GbE interfaces have an MTU of 9192 and that an of the ge-0/0>4.0 interfaces on the SRX Series devices are in a specific zone.
Which type of a script would you use to accomplish this task?
- A. commit script
- B. op script
- C. REST script
- D. event script
Answer: B
NEW QUESTION 41
You are asked to perform a risk assessment for a core layer switch in your data center. After analyze the Annual loss Expectancy (ALE) for this switch, you conclude that the risk remediation strategy involves purchasing insurance to protect against losses due to compromise or failure.
This scenario describes which risk remediation strategy?
- A. risk avoidance
- B. risk acceptance
- C. risk transfer
- D. risk mitigation
Answer: B
NEW QUESTION 42
What are two reasons for using a cSRX instance over a vSRX instance? (Choose two )
- A. A cSRX instance supports more features than a vSRX instance
- B. cSRX instances launch faster than vSRX instances
- C. cSRX instances share the host OS unlike vSRX instances.
- D. A cSRX instance uses more memory but uses less disk space than a vSRX instance
Answer: D
NEW QUESTION 43
As part of your design to secure a service provider WAN. you are asked to design a destination-based remote triggered black hole (RTBH) solution What arc two reasons for using this design? (Choose two)
- A. You want to ensure that the destination IP remains reachable
- B. You do not know the source address of DDoS packets
- C. The attack comes from a limited number of source IP addresses
- D. The attack is focused on a single IP address
Answer: A
NEW QUESTION 44
You arc asked to proud a design proposal to secure a service provider's network against IP spoofing As part of your design, you must ensure that only traffic sourced from the same subnet is followed on the customer-facing interfaces. Which solution will satisfy this requirement?
- A. unicast RPF with strict mode
- B. BGP labeled-unicast using the resolve-vpn option
- C. unicast RPF with loose mode
- D. BGP with source of origin community
Answer: A
NEW QUESTION 45
Which feature is evaluated first when a packet is received on an interface of an SRX Series device?
- A. screens
- B. stateless firewall filter
- C. ALG
- D. UTM
Answer: D
NEW QUESTION 46
You are asked to deploy multiple kiosk locations around the country. Their locations will change frequently and will need to access services in the corporate data center as well as other kiosk locations You need a central key location In this scenario, which solution would you deploy?
- A. Auto VPN
- B. Mesh VPN
- C. Juniper Secure Connect
- D. Group VPN
Answer: A
NEW QUESTION 47
Refer the Exhibit.
You must ensure that return Web traffic is not dropped by the firewall devices What must be implemented on the link between FW A and FW B?
- A. VRRP
- B. session sync
- C. asymmetric routing
- D. BFO
Answer: A
NEW QUESTION 48
When using Contra! networking, security policies are distributed as access control list to which component?
- A. vSRX
- B. vMX
- C. vSwith
- D. vRouter
Answer: D
NEW QUESTION 49
A customer wants to understand why Poky Enforcer is included as a part of your network design proposal.
In this situation, which statement is correct
- A. Policy Enforcer can collect events and news from a wide range of network devices
- B. Policy Enforcer provides 2ero trust security to ail devices connecting to the network
- C. Policy Enforcer submits files to Juniper ATP Cloud for malware scanning
- D. Policy Enforcer can provide client security based on software installed on the client machine
Answer: C
NEW QUESTION 50
You are designing a central management solution Your customer wants a togging solution that will support the collection of up to 10.000 events per second from many SRX Series devices that will be deployed m their network. In this scenario. which solution should you include in your design proposal?
- A. Contrail Server Orchestration
- B. Network Director
- C. Contrail Insights
- D. Log Oi rector
Answer: D
NEW QUESTION 51
According to Juniper Networks, what are two focus points when designing a secure network? (Choose two.)
- A. automation
- B. performance
- C. distributed control
- D. classification
Answer: B,D
NEW QUESTION 52
Your company just purchased another company that uses the same IP address space as your company. You are asked to design a solution that allows both company's to use each other's IT resources. Which two actions would you use to accomplish this task? (Choose two.)
- A. Implement double NAT
- B. Implement two non-overlapping equal-size address blocks
- C. Implement three non-overlapping equal-size address blocks.
- D. Implement persisted mat
Answer: C
NEW QUESTION 53
You are asked to provide a network design proposal for a service provider As part of this design you must provide a solution that allows the service provider to mitigate DDoS attacks on their customers Which two features will satisfy this requirement? (Choose two)
- A. 8GP traffic engineering
- B. Storm control
- C. 8GP FlowSpec
- D. remote triggered Hack hole (RTBH)
Answer: D
NEW QUESTION 54
Which solution would you deploy to accomplish this task?
- A. Junes Space Log Director
- B. Junos Space Security Director
- C. Juniper Networks Secure Analytics
- D. Juniper Networks Central insights
Answer: A
NEW QUESTION 55
You are designing a security solution that includes SRX Series firewalls in a chassis cluster.
In this scenario. which two dements must be part of the design? (Choose two.)
- A. The node 10 must be the same on both SRX Series devices
- B. The duster ID must be the same on both SRX Series devices
- C. The physical interface on each SRX Series device making up the reth interface must be in separate L2 domains
- D. The physical interface on each SRX Series device making up the reth interface must be in the same L2 domain
Answer: C
NEW QUESTION 56
......
Juniper JN0-1332 Exam Certification Details:
| Sample Questions | Juniper JN0-1332 Sample Questions |
| Duration | 90 minutes |
| Recommended Training | Juniper Networks Design - Security (JND-SEC) |
| Passing Score | Variable (60-70% Approx.) |
| Exam Name | Security Design Specialist |
| Number of Questions | 65 |
| Exam Code | JN0-1332 JNCDS-SEC |
| Exam Registration | PEARSON VUE |
| Exam Price | $300 USD |
New Real JN0-1332 Exam Dumps Questions: https://www.validvce.com/JN0-1332-exam-collection.html
