Master 2021 Latest The Questions Network Appliance NCSE and Pass NS0-194 Real Exam! [Q91-Q113]

Share

Master 2021 Latest The Questions Network Appliance NCSE and Pass NS0-194  Real Exam!

Penetration testers simulate NS0-194 exam PDF

NEW QUESTION 91
You have a FAS2240 system using Data ONTAP 8.2.1 7-Mode with CIFS share "cifs" on an NTFS security-style volume.
Which two permissions would be modified using Windows Explorer? (Choose two.)

  • A. file permissions
  • B. cluster permissions
  • C. folder permissions
  • D. share permissions

Answer: B,D

 

NEW QUESTION 92
Exhibit:

Round-robin DNS has been configured for all data LIFs belonging to SVM1. There is a data LIF on every node of that 4-node cluster.
The administrator has reports from users of sporadic user access issues when accessing CIFS shares on SVM1. The administrator determines that one out of four attempts result in a "path not found error" message. The administrator believes that the issue is network related.
Referring to the exhibit, which statement is correct?

  • A. There are no issues found and all data LIFs are in a healthy status.
  • B. "lif3" and "lif-4" are on different ports as "lif1" and "lif2".
  • C. There is an issue with node clusterB-04's port e0d, causing "lif3" to be down.
  • D. "lif3" has been administratively configured down.

Answer: D

 

NEW QUESTION 93
A customer is showing disk utilization is at 100% in Active IQ even though there are low protocol operations on the controller. You review the data shown in the exhibit.

In this situation, what should you do?

  • A. Reseat shelf module B.
  • B. Add disks to the aggregate to bring down the average utilization.
  • C. Replace disks 6b.34 and 6a.19.
  • D. Replace disk 6b.39.

Answer: D

 

NEW QUESTION 94
A customer is showing disk utilization is at 100% in Active IQ even though there are low protocol operations on the controller. You review the data shown in the exhibit.

In this situation, what should you do?

  • A. Reseat shelf module B.
  • B. Add disks to the aggregate to bring down the average utilization.
  • C. Replace disks 6b.34 and 6a.19.
  • D. Replace disk 6b.39.

Answer: D

 

NEW QUESTION 95
A customer must store physical hard copies of transaction data off site to meet regulatory requirements.
Which NetApp technology enables the customer to accomplish this task?

  • A. SVM DR
  • B. SnapVault
  • C. NDMP
  • D. FlexCache

Answer: B

Explanation:
Explanation/Reference: https://library.netapp.com/ecmdocs/ECMP1635994/html/GUID-74F9AB84-BF01-4F0F-9197-
7C4D8C3F8002.html

 

NEW QUESTION 96
While troubleshooting intermittent takeover impossible command entries on the console, you request the output of the storage failover interconnect statistics error show command.
Which two counters would help troubleshoot this problem? (Choose two.)

  • A. link error recovery counter
  • B. sent queue length counter
  • C. peer connections lost
  • D. avg peer connection time

Answer: A,B

 

NEW QUESTION 97
During the deployment of a new system, the administrator has a business requirement for the data volumes to have file blocking and auditing.
Which feature would enable these capabilities?

  • A. Fpolicy
  • B. secd tracing
  • C. Vscan
  • D. log forwarding

Answer: A

 

NEW QUESTION 98
You perform a security trace when troubleshooting a data access problem for a user. The results are shown in the exhibit.

What should you do to solve this issue?

  • A. Add the user to the BUILTIN\power Users group.
  • B. Add the user to the BUILTIN\Users group.
  • C. Grant the user Read Attributes access to the path.
  • D. Grant the user Execute access to the path.

Answer: C

 

NEW QUESTION 99
A user can read and write some files on an NFS volume, but the user is unable to read all of the files in the volume.
In this scenario, which command will help you troubleshoot this problem?

  • A. vserver export-policy check-access
  • B. security login create
  • C. security audit show
  • D. vserver security trace filter create

Answer: D

 

NEW QUESTION 100
Which NetApp HCI component communicates with activeiq.solidfire.com and the Cloud Data Services portal?

  • A. the NetApp Trident software
  • B. the management node (mNode)
  • C. the NetApp Element software vSphere plug-in
  • D. the NetApp Element software Management Interface

Answer: B

 

NEW QUESTION 101
When you replace a motherboard, which step will completely test the newly installed component?

  • A. From the LOADER prompt, type boot_diags, then execute sldiag.
  • B. From the LOADER prompt, type boot_ontap maint, then execute sldiag.
  • C. From the LOADER prompt, execute sldiag.
  • D. From ONTAP, execute sldiag.

Answer: B

Explanation:
Explanation/Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1199896 (36)

 

NEW QUESTION 102
For the cluster network of a two-node cluster running Data ONTAP 8.3.1, which statement is true?

  • A. Only the traffic that is required for a volume move operation is sent across the cluster network.
  • B. Client traffic will be sent across the cluster network, if the LIF and the volume are not on I same node.
  • C. Only configuration data is sent across the cluster network.
  • D. Client traffic will never be sent across the cluster network, since ALUA automatically chooses the best path.

Answer: A

 

NEW QUESTION 103
A new storage efficiency job is executed on a volume hosting only a thick-provisioned LUN. Although 45% of the space was saved, no extra space was seen by the client.
In this scenario, which statement is correct?

  • A. There are volume Snapshot copies that were taken before the efficiency job.
  • B. The volume is thin provisioned.
  • C. The client needs to re-scan the volume to detect the changes.
  • D. The client sees only the logical space for the LUN.

Answer: C

 

NEW QUESTION 104
When using NetApp Volume Encryption (NVE) which type of server is needed to keep encryption keys separate from encrypted data?

  • A. TKIP
  • B. TLS
  • C. RADIUS
  • D. KMIP

Answer: D

Explanation:
Explanation/Reference: http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-nve%2FGUID- EAD13D8E-0219-45B6-A2C6-B25B76C9CA1A.html

 

NEW QUESTION 105
A customer is concerned because an external tool is reporting 100% CPU utilization on node "netapp-01". There are no reports of latency or throughput issues. You execute some commands and obtain the output shown in the exhibit.
Based on the output, you see no problems. In this scenario, what are two reasons that support your position? (Choose two.)

  • A. the low number of CIFS operations
  • B. the consistency points are type T
  • C. the amount of read network throughput is below 200 MB/sec
  • D. average CPU utilization is below 50%

Answer: A,D

 

NEW QUESTION 106
Referring to the exhibit.


The exhibit shows an overview of a customer's network design. The customer is experiencing ping loss. As part of the troubleshooting process, you receive output by using the if grp status command from the node shell.
In this scenario, what is the customer's problem?

  • A. Virtual LANs (VLANs) are not used, which causes the interfaces to be overloaded.
  • B. Virtual interface (VIF) is deprecated in clustered Data ONTAP because the interface group is not working as it should.
  • C. The interface group on the controller is not using the default type, causing a connection mismatch with the switch.
  • D. Link aggregation is not active on the switch, despite being in the design.

Answer: B

 

NEW QUESTION 107
Which statement is true about a switchless cluster?

  • A. A switchless cluster can support up to one node per cluster port.
  • B. Converting a switchless cluster to a switched cluster is disruptive.
  • C. A switchless cluster can only be used for a system with two controllers in one chassis configuration.
  • D. In a switchless cluster, the network options switchless-cluster -enabled parameter must be set to true.

Answer: D

 

NEW QUESTION 108
What is the consequence of a loss of connectivity between a Cloud Volumes ONTAP (CVO) instance and Cloud Manager for four or more days?

  • A. Cloud Manager removes the CVO instance from its inventory.
  • B. The CVO instance must be added back manually to Cloud Manager.
  • C. The CVO instance sends an AutoSupport message.
  • D. The CVO instance is stopped.

Answer: A

 

NEW QUESTION 109
Several clients are accessing an ONTAP SnapMirror DP destination volume. Some clients frequently access the newest SnapMirror volume data. Accessing this data is much slower when compared to clients that directly access data on the source. You use the wafl scan status command against the destination.
What is a symptom of the problem in this scenario?

  • A. blocks used summary update
  • B. volume deswizzling
  • C. container block reclamation
  • D. active bitmap rearrangement

Answer: A

 

NEW QUESTION 110
Which two statements are true about epsilon in a 4-node cluster? (Choose two.)

  • A. Epsilon is automatically assigned to the last node added to a cluster.
  • B. Epsilon is used as a tie-breaker for determining a quorum.
  • C. Epsilon is authentically assigned to the first node when a cluster is created.
  • D. Epsilon is used for determining the up node in failover.

Answer: B,C

 

NEW QUESTION 111
Click the Exhibit button at the right.
When using ONTAP, the customer uses a mirror-SnapVault cascade, as shown in the exhibit. The Snapshot copies successfully transfer from the primary volume on storage system A to the SnapMirror destination on storage system B.
However, not all SnapMirror Snapshot copies are being transferred from storage system B to the XDP destination on storage system C.

In this scenario, which Snapshot copies will transfer successfully?

  • A. any Snapshot copy created within the last 24 hours
  • B. only Snapshot copies with the SnapMirror label called sm_created
  • C. transfers initiated by a SnapMirror schedule
  • D. all manually initiated SnapMirror transfers

Answer: B

 

NEW QUESTION 112
A customer explains that their V3170 NetApp controller has failed over and they do not know what to do next.
In this scenario, what information should the customer collect from the Remote LAN Module (RLM) and send to you? (Choose two.)

  • A. output from the sp status command
  • B. output from the events all command
  • C. output from the system log command
  • D. output from the events info command

Answer: B,C

 

NEW QUESTION 113
......

Penetration testers simulate NS0-194 exam: https://www.validvce.com/NS0-194-exam-collection.html

Bestselling On-The-Job Reference Exam Questionshttps://drive.google.com/open?id=1KsodCknD_fzqa_zFR8aizPu21XH6mAuq