Most UptoDate Cisco 300-435 Exam Dumps PDF 2021
100% Free Cisco Certified DevNet Professional 300-435 Dumps PDF Demo Cert Guide Cover
Cisco DNA Center
This objective covers 20% of the exam questions and validates the learners’ understanding of the specific tasks, including the following:
- Implementing the API request for Cisco DNA Center for accomplishing the network management projects, including Intent APIs, site APIs, as well as APIs Command Runner;
- Troubleshooting the automation process for Cisco DNA Center with the use of Intent APIs.
- Comparing the software-defined and traditional networks;
- Explaining the capabilities and features of Cisco DNA Center, such as APIs for Network assurance, Multivendor support, Intent APIs, and Events & notification;
NEW QUESTION 17
What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)
- A. It does not require any modules of software except SSH to be loaded on the network device.
- B. Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.
- C. All IOS XE operating systems include Ansible playbooks for basic system administration tasks.
- D. It is a device-independent method for automation and can be used with any type of device or operating system.
- E. Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.
Answer: B,D
Explanation:
Section: Network Programmability Foundation
Explanation/Reference: https://developer.cisco.com/learning/modules/intro-ansible-iosxe/ansible-overview/step/4
NEW QUESTION 18
A new project called "device_status" must be stored in a central Git repository called "device_status" with the first file named "device_status.py". The Git repository is created using the account python_programmer.
Which set of commands inserts the project into Git?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION 19
Which REST endpoint is used to create a Cisco Meraki network?
- A. PUT /organizations/{organizationId}/networks
- B. POST /organizations/{organizationId}/networks
- C. POST /networks{networkId}
- D. PATCH /networks{networkId}
Answer: B
Explanation:
Reference:
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API
https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API
NEW QUESTION 20
FILL BLANK
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96-
143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
"deviceid":
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/ Command_Reference/vManage_REST_APIs/Software_Maintenance_APIs/Reboot_Device
NEW QUESTION 21
Which Python snippet receives a Meraki webhook request?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 22
Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What are the two YANG data nodes and modules referenced in the response? (Choose two.)
- A. ipv4 is a container defined in the ietf-ip module
- B. description is a key field defined in the interface list
- C. address is a container defined in the ietf-interfaces module
- D. The ethernetCsmacd type is imported from the iana-if-type module
- E. interface has the YANG data node type of container
Answer: D,E
NEW QUESTION 23
Refer to the exhibit.
NTP server 10.1.1.20 must be configured on the target Cisco IOS XE device without using authentication and logging. Which state should be added on a new line at the end of the Ansible task?
- A. state: true
- B. state: started
- C. state: installed
- D. state: present
Answer: D
NEW QUESTION 24
What are two characteristics of RPC API calls? (Choose two.)
- A. They can be used only on network devices.
- B. They use only UDP for communications.
- C. They must use SSL/TLS.
- D. They call a single function or service.
- E. Parameters can be passed to the calls.
Answer: A,E
NEW QUESTION 25
Refer to the exhibit.
Which XML tag completes this NETCONF telemetry subscription with a Cisco IOS XE device?
- A. period
- B. crontab
- C. cadence
- D. frequency
Answer: A
NEW QUESTION 26
When working with MV Sense APIs, which type of protocol is MQTT based upon?
- A. publish-subscribe messaging protocol
- B. heavyweight messaging protocol
- C. computer vision protocol
- D. simple mail transport protocol
Answer: A
NEW QUESTION 27
Drag and drop the code from the bottom onto the box where the code is missing to complete this API request against the Cisco SD-WAN vManage Statistics API, which specifies a device with an Id of 100faff9-8b36-4312-bf97-743b26bd0211, a local color of biz-internet, and a remote color of gold. Not all options are used.
Answer:
Explanation:
NEW QUESTION 28
Refer to the exhibit.
A RESTCONF GET request is sent to a Cisco IOS XE device. A portion of the response is shown in the exhibit.
Which module name corresponds to the YANG model referenced in the request?
- A. ietf-interfaces:interfaces
- B. iana-if-type:ethernetCsmacd
- C. ietf-interfaces
- D. ietf-interfaces:ietf-ipv4
Answer: A
NEW QUESTION 29 
Refer to the exhibit. What is the correct ncclient method to use to collect the running configuration of a Cisco IOS XE device that uses NETCONF?
- A. config=m.copy_config(source='running')
- B. config=m.collect_config(source='running')
- C. config=m.get(source='running')
- D. config=m.get_config(source='running')
Answer: A
Explanation:
Section: Network Device Programmability
Explanation/Reference: https://ncclient.readthedocs.io/en/latest/
NEW QUESTION 30
Refer to the exhibit.
A template is provided to a junior developer to automate the creation of a network on the Meraki dashboard. The new network needs to have the id 123456789 and support only wired network connections. What type needs to be added to the API?
- A. systemsManager
- B. wireless
- C. switch
- D. appliance
Answer: D
NEW QUESTION 31
Which field must be completed in Cisco DNA Center when a network discovery is initiated?
- A. Enable password
- B. Discovery type
- C. SNMP read community string
- D. NETCONF port
Answer: B
Explanation:
Section: Cisco DNA Center
Explanation/Reference: https://www.cisco.com/c/dam/en_us/training-events/product-training/dnac-13/ DNAC13_AddingDevicesByUsingDiscovery.pdf (p.26)
NEW QUESTION 32
Fill in the blank to complete the statement.
Answer:
Explanation:
ZTP
NEW QUESTION 33
Fill in the blank to complete the URL for an API call to Cisco SD-WAN to display the history of the Bidirectional Forwarding Detection sessions that run on a vEdge router.
Answer:
Explanation:
bfd/synced/sessions?
Explanation
https://vmanage-ip-address/dataservice/device/bfd/synced/sessions?deviceId=deviceId
NEW QUESTION 34
Which two factors influence the location accuracy of a device using Scanning APIs? (Choose two.)
- A. client device orientation
- B. device manufacturer/OS
- C. amount of device antennas
- D. battery life of the device
- E. AP placement
Answer: A,E
Explanation:
Section: Cisco Meraki
Explanation:
The geo-location coordinates (latitude, longitude) and X,Y location data accuracy can vary based on a number of factors and should be considered a best effort estimate. AP placement, environmental conditions, and client device orientation can influence X,Y estimation; experimentation can help improve the accuracy of results or determine a maximum acceptable uncertainty for data points.
Reference: https://developer.cisco.com/meraki/guides/location-services-solution-guide/
NEW QUESTION 35
What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)
- A. It does not require any modules of software except SSH to be loaded on the network device.
- B. Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.
- C. All IOS XE operating systems include Ansible playbooks for basic system administration tasks.
- D. It is a device-independent method for automation and can be used with any type of device or operating system.
- E. Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.
Answer: A,D
Explanation:
Reference:
https://developer.cisco.com/learning/modules/intro-ansible-iosxe/ansible-overview/step/4
NEW QUESTION 36
......
Updated Cisco 300-435 Dumps – PDF & Online Engine: https://www.validvce.com/300-435-exam-collection.html
PDF Exam Material 2021 Realistic 300-435 Dumps Questions: https://drive.google.com/open?id=1egIYSiyHMLwRtHDg4n5LnPr1ejKL9Igf
