New 2022 Guaranteed Success with ValidVCE C1000-055 Dumps IBM PDF Questions
Exceptional Practice To IBM QRadar SIEM V7.3.2 Deployment Pass the First Time
NEW QUESTION 24
A deployment professional is redesigning the existing deployment to add a event processor due to an increased event rate. The deployment professional observes the events per second (EPS) to be a collective 30,000 EPS from two event collectors (EC1 and EC2) and sometimes exceeds the EPS capacity. EC1 and EC2 are in same network segment.
Considering there are more licenses available than needed in the license pool, which processor should the deployment professional replace the event collector(s) with?
- A. Replace EC1 and EC2 with one QRadar Event Processor 1605
- B. Replace EC1 with one QRadar Event Processor 1648
- C. Replace EC1 and EC2 with one QRadar Event Processor 1629
- D. Replace EC1 with one QRadar Event Processor 1605
Answer: C
NEW QUESTION 25
A deployment professional needs to ensure that in high-security unidirectional networks (also known as data diodes), logs are collected from different log sources.
Which option should the deployment professional use?
- A. A Disconnected Log Collector of IBM QRadar
- B. An IBM QRadar Event Processor
- C. An IBM QRadar Packet Capture solution
- D. An IBM QRadar Data Node
Answer: C
NEW QUESTION 26
A deployment professional wishes to implement a QRadar product which provides network topology, active attack paths and high-risk assets risk-score adjustment on assets based on policy compliance.
Which product would the deployment professional deploy to achieve this?
- A. QRadar Vulnerability Scanner
- B. QRadar Risk Manager
- C. QRadar Topology Scanner
- D. QRadar Incident Forensics
Answer: C
NEW QUESTION 27
A deployment professional needs to configure network devices to send IPFIX to a QRadar deployment consisting of 1 QRadar Console 3129 and 2 QRadar Event Processors 1629. The routers will send more than 1
000 000 FPM.
Which component should be added to the existing deployment?
- A. Flow Processor
- B. DataNode
- C. AppHost
- D. Event Collector
Answer: D
NEW QUESTION 28
A deployment professional is about to execute Server Discovery to populate the Host Definition Building Blocks. The deployment professional is working in a monitored environment and does not wish to set off any network scanner alarms.
What step should the deployment professional take to ensure that good results are returned and that no alarms are raised?
- A. Set the 'Passive discovery' flag in Advanced System Settings in the Admin tab
- B. Warn the network monitoring team that QRadar is about to run a network port scan
- C. Ensure that the flow sources are configured correctly and collecting data
- D. Ensure that events from the relevant servers are being collected successfully
Answer: A
NEW QUESTION 29
A client uses the IBM Security QRadar Vulnerability Manager to discover vulnerabilities on the network devices, applications, and software. They run the QRadar Vulnerability Manager from an All-in-one system, where the scanning and processing functions are on the Console. As the client's QRadar deployment is growing, they are also considering deploying scanners.
What is a valid client motivation for deploying additional scanners?
- A. To avoid scanning through a firewall that is a log source.
- B. To patch assets for their vulnerabilities.
- C. To find more vulnerabilities on a given system.
- D. To scan an asset in the same geographic region as the QRadar Vulnerability Manager processor.
Answer: C
NEW QUESTION 30
A deployment professional is notified that event and flow data that are sent to the All-in-One are not processing. However, there is no issue with the existing data.
What should the deployment professional investigate?
- A. Check the connection between All-in-One and the X-Force.
- B. Check the connection between Console and the Event Processor.
- C. Check to see if the All-in-One license is expired.
- D. Check to see if the Event Collector license is expired.
Answer: D
NEW QUESTION 31
Two newly installed QRadar applications are creating performance issues at the console. How should the deployment professional proceed?
- A. Deploy one App Host, move apps from the console and test if the situation improves.
- B. Deploy one App Node, move apps from the console and test if the situation improves.
- C. Deploy two different App Nodes as both applications might need dedicated resources. App auto-balancing is enabled by default.
- D. Deploy two different App Hosts as both applications might need dedicated resources. App auto-balancing is enabled by default.
Answer: C
NEW QUESTION 32
A deployment professional needs to create Identity Excluded Searches so as to prevent specific Asset entries from being created. These Asset entries are being created from the events that the QRadar deployment is receiving from different Log Sources.
To add to these Identity Excluded Searches, which type of Saved Searches should be created?
- A. Real Time Searches
- B. Searches containing last 7 Days data
- C. Searches containing last 24 Hours data
- D. Searches containing last 15 Minutes Data
Answer: A
NEW QUESTION 33
The deployment professional needs to pull events from an HR system that are recorded in a database. Which protocol would be used to collect the data?
- A. JDBC
- B. HTTP
- C. syslog
- D. OPSEC/LEA
Answer: A
NEW QUESTION 34
A deployment professional needs to find out which rules are generating most of the offenses. What should the deployment professional do? (Choose two)
- A. Generate Report "System Summary"
- B. Offenses -> Rules -> Sort by Offense Count
- C. Use search where Log source is Health Metrics-2 :: <qradar hostname> and choose Grouping by Event Name
- D. Use search where Log source is Custom Rule Engine-8 :: <qradar hostname> and choose Grouping by Event Name
- E. Offenses -> By Category
Answer: A,B
NEW QUESTION 35
A systems team has configured their application to send syslog via tcp to a QRadar event collector. The deployment professional has noted that no such logs have arrived for the pre-defined log source.
To troubleshoot this and to prove this traffic has/has not arrived at the event collector, what command can be used from the event collector CLI?
(The Device_Address is an IPv4 address or a host name)
- A. tcpdump -s 0 -A host Device Address and udp port 514
- B. pcap -s 0 -A host Device Address and port 514
- C. pcap -s 0 -A host Device_Address and udp port 514
- D. tcpdump -s 0 -A host DeviceAddress and port 514
Answer: B
NEW QUESTION 36
A deployment professional needs to add a new log source using Log File protocol. Which option is valid for retrieving files?
- A. SFTP
- B. SNMP
- C. TFTP
- D. Syslog
Answer: A
NEW QUESTION 37
A deployment professional needs to configure the X-Force Threat Intelligence Feed through a web proxy to access the cloud servers hosting the information.
How should the deployment professional configure the proxy for this access?
- A. Complete the 'Server Config' values in the Advanced Update Configuration section of Auto Updates )
- B. Edit the Vetc/httpd/conf.d/ssl.conf and Vopt/qradar/dca/server.ini' files on the Console and restart some services
- C. Complete the 'System Proxy' values in the Advanced System Settings section of the Admin tab
- D. Reconfigure iptables access on each managed host to provide access to 'update.xforce-security.com' and
'license.xforce-security.com' and restart some services
Answer: C
NEW QUESTION 38
A deployment professional needs to configure the IBM QRadar systems so that data is forwarded to one or more vendor systems, such as ticketing or alerting systems.
Which event format options can the deployment professional use for forwarding destination configuration?
- A. payioad, normalized and json
- B. normalized, json and cef
- C. json, cef and payload
- D. leef, json and cef
Answer: B
NEW QUESTION 39
A deployment professional is asked to create QRadar deployment architecture for a company.
The company has three branch offices with WAN connection between them. The head office data center requires 14000 EPS and 200000 FPM. Each branch requires 4000 EPS and 200000 FPM.
Which deployment solution will meet the minimum requirements?
- A. QRadar 3129 (All-in-One) in head office
- B. QRadar 3105 (Console) and QRadar Event and Flow Processor 1829 in head office + QRadar 1805 Event and Flow Processor in each branch office
- C. QRadar 3129 (Console) in head office + QRadar 1805 Event and Flow Processor in each branch office
- D. QRadar 3105 (Console) in head office + QRadar 1805 Event and Flow Processor in each branch office
Answer: D
NEW QUESTION 40
An application developer is working on a reporting tool that fetches and visualizes data from multiple data sources. The deployment professional is asked to explain how to make authenticated requests on QRadar using its REST API interface.
Which authentication method is supported by QRadar's REST API?
- A. Authorization token in an HTTP header
- B. Authorization token in an LTPA token
- C. Authorization token in an JWT token
- D. Authorization token in an HTTP query string
Answer: C
NEW QUESTION 41
A deployment professional configures domain definitions for events in a multi-tenant QRadar environment.
The domain assignments for tenants, flows, VA scanners, reference data, network hierarchy items are already configured.
Which is the order of precedence between the incoming event's attributes when evaluating its domain assignment?
- A. Custom Properties, Network Hierarchy, Log Source, Event Collector
- B. Tenant, Log Source, Network Hierarchy, Log Source Group
- C. Custom Properties, Log Source, Log Source Group. Event Collector
- D. Tenant, Network Hierarchy. Log Source, Event Collector
Answer: D
NEW QUESTION 42
A company that is located in the United States wants to expand its existing QRadar deployment to data centers located in Europe. The European branch needs to keep its data in-country and must comply with local data retention regulations.
What can the deployment professional do to comply with local data laws?
- A. Install Event and Flow Processors in the European data center.
- B. Install Event and Flow Collectors in the European data center.
- C. Install Event and Flow Processors in the United States data center.
- D. Install Data Nodes in the European data center.
Answer: B
NEW QUESTION 43
A deployment professional has been asked to ensure the system can be integrated with another system which contains lists of IP addresses and CIDR ranges in an automated manner, to allow rules to target specific communication endpoints.
Which part of QRadar is designed to hold and manage this data?
- A. Building Blocks
- B. Asset Profiles
- C. Network Hierarchy
- D. Domain Definition
Answer: A
NEW QUESTION 44
A deployment professional is creating an architecture for a customer who has locations which regularly go out of contact with the rest of the network. The requirement is to receive logs locally and then have a scheduled connection to QRadar to upload the events.
Which QRadar appliances should be deployed in these locations?
- A. 15xx Event Collector with a Store and Forward schedule
- B. 31 xx All-in-One with Online Forwarding configured
- C. 16xx Event Processor with a Store and Forward schedule
- D. Disconnected Log Collector with UDP configured
Answer: C
NEW QUESTION 45
A deployment professional is faced with the following system notification.
38750107 - The last attempt to read in rules (usually due to a rule change) has failed. Please see the message details and error log for information on how to resolve this.
What should the deployment professional do after trying to disable and enabling the rule?
- A. Modify the rule.
- B. Create a new rule without deleting the old rule.
- C. Before doing anything else, call customer support.
- D. Delete and recreate the rule.
Answer: C
NEW QUESTION 46
A deployment professional is working on integrating an unsupported log source. The log source is able to send events in multiple formats. The administrators of the log source ask which event format should be configured.
Which event format should the deployment professional choose to be able to use direct parsing support in QRadar's DSM editor?
- A. Regex
- B. SAML
- C. BLOB
- D. LEEF
Answer: C
NEW QUESTION 47
A deployment professional has been asked to ensure that the system has access to information which can be used by rules to acquire information extracted from a user information source such as Active Directory or LDAP.
Which information repository should the deployment professional store this data in?
- A. Reference Data
- B. Ariel Database
- C. Docker containers
- D. Asset profiles
Answer: C
NEW QUESTION 48
......
C1000-055 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.validvce.com/C1000-055-exam-collection.html
