[Oct 31, 2024] C_THR84_2405 Test Engine files, C_THR84_2405 Dumps PDF
Latest SAP C_THR84_2405 PDF and Dumps (2024) Free Exam Questions Answers
NEW QUESTION # 44
Which of the following is an SAP leading practice regarding the blackout period?
- A. When a change is made to a job requisition, you can expect a delay of up to 24 hours for the job to be moved to the Career Site Builder site via Real-time Job Sync.
- B. After the release information is updated in the What's New Viewer, you may NOT discuss with customers what is included in the release.
- C. After a Career Site Builder page is published, you may need to wait a few minutes before you can publish additional changes to that page.
- D. When the update code is pushed to Preview, you CANNOT move the Career Site Builder site to Production until after the Production release is complete.
Answer: D
Explanation:
According to the SAP SuccessFactors Recruiting: Candidate Experience Administration course1, the blackout period is a time frame during which you should not move your Career Site Builder site to Production. This is because the update code is pushed to Preview first, and then to Production later, usually within a week. If you move your site to Production during this time, you may encounter issues or inconsistencies due to the different code versions. Therefore, the SAP leading practice is to wait until the Production release is complete before moving your site to Production1.
The other options are not related to the blackout period, but rather to other aspects of the Career Site Builder functionality. For example:
Option B refers to the Real-time Job Sync feature, which allows you to sync job requisitions from Recruiting Management to Career Site Builder without any delay. However, this feature requires additional configuration and activation, and it may not be available for all customers2.
Option C refers to the caching mechanism of Career Site Builder, which may cause a slight delay between publishing a page and seeing the changes on the live site. This is normal and expected, and it does not affect the functionality of the site3.
Option D refers to the What's New Viewer, which is a tool that provides information about the new features and enhancements in each release of SAP SuccessFactors. This tool is available for both administrators and end users, and it can be accessed from the SAP SuccessFactors homepage or from the Help Center. There is no restriction on discussing the release information with customers, as long as it is accurate and relevant4. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Real-time Job Sync, Career Site Builder Caching, What's New Viewer
NEW QUESTION # 45
You have enabled Candidate Relationship Management created a branded email layout for your customer. When can this custom email layout be used? Note: There are 2 correct answers to this question.
- A. When sending an email from the Applicant Workbench
- B. When sending an email associated with an applicant status
- C. When sending an email from the Candidate Search page
- D. When sending an email associated with a Recruiting email trigger
Answer: A,C
NEW QUESTION # 46
Your customer requires additional Home pages when enabling which of the following elements?Note: There are 2 correct answers to this question.
- A. Brands
- B. Locales
- C. Maps
- D. Site kits
Answer: A,B
Explanation:
Your customer requires additional Home pages when enabling brands and locales on their Career Site Builder site. Brands are different identities or subdomains that your customer may have for their career site, such as different divisions, regions, or products. Locales are different languages or regional settings that your customer may have for their career site, such as English, French, or German. When enabling brands and locales, you need to create additional Home pages for each combination of brand and locale, to ensure that the content and layout are consistent and appropriate for each audience. For example, if your customer has two brands, Brand A and Brand B, and two locales, English and French, then you need to create four Home pages:
Home - English - Brand A
Home - English - Brand B
Home - French - Brand A
Home - French - Brand B
Maps and site kits are not elements that require additional Home pages when enabling them on a Career Site Builder site. Maps are components that display the location of your customer's offices or job requisitions on a map. Site kits are templates that provide predefined styles, components, and pages for your career site. You can use maps and site kits on any Home page, regardless of the brand or locale, without creating additional Home pages. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration
NEW QUESTION # 47
Assume that you have set up and run Recruiter Sync, but users do NOT appear in Career Site Builder under Users > Roles > Admin Users.What are some of the steps you can take to troubleshoot this issue?Note: There are 2 correct answers to this question.
- A. Check the Export Jobs to CSV log from Command Center.
- B. Check the field mapping from Admin Center > Set Up Recruiting Marketing Job Field Mapping.
- C. Check that each user has a unique email address.
- D. Check the Export Automated Process Logs from Command Center.
Answer: C,D
Explanation:
Recruiter Sync is a process that synchronizes the user data from SAP SuccessFactors Recruiting Management to Career Site Builder. If users do not appear in Career Site Builder after running Recruiter Sync, you can troubleshoot this issue by checking the following:
Check the Export Automated Process Logs from Command Center. This will show you the status and details of the Recruiter Sync process, such as the start time, end time, number of records processed, and any errors or warnings. You can also download the log file for further analysis.
Check that each user has a unique email address. This is a requirement for Recruiter Sync to work properly. If there are duplicate email addresses in the user data, the process will fail and the users will not be synced to Career Site Builder. You can use the User Data File report from Command Center to identify and resolve any duplicate email addresses. Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 1: Candidate Experience Overview and Project Kickoff, Lesson: Recruiter Sync, Slide 5-6.
NEW QUESTION # 48
Candidate Relationship Management
Your customer is planning to host a virtual job fair to connect with potential candidates who have experience in the medical industry. You create a Candidate Profile Extension field with an associated picklist. Where will you add this field so that candidates can complete it during the job fair even if they do NOT apply for a job?
- A. Add the field to the Create an Account page.
- B. Add the field to the Application template.
- C. Add the field to a data capture form.
- D. Add the field to the Candidate Profile template.
Answer: C
Explanation:
Option A is correct because adding the field to a data capture form will allow candidates to complete it during the job fair even if they do not apply for a job. A data capture form is a tool that collects candidate information on a landing page without requiring them to create an account or submit an application. Data capture forms can be used for events, campaigns, or surveys to engage with potential candidates and build talent pools1.
Option B is incorrect because adding the field to the Application template will only allow candidates to complete it if they apply for a job. The Application template is the form that candidates fill out when they apply for a specific job requisition on the career site. The Application template is not suitable for capturing candidate information for general events or campaigns2.
Option C is incorrect because adding the field to the Candidate Profile template will only allow candidates to complete it if they create or update their profile on the career site. The Candidate Profile template is the form that candidates fill out when they create or update their profile on the career site. The Candidate Profile template is not suitable for capturing candidate information for general events or campaigns3.
Option D is incorrect because adding the field to the Create an Account page will only allow candidates to complete it if they create an account on the career site. The Create an Account page is the page that candidates see when they click on the Create an Account button on the career site. The Create an Account page is not suitable for capturing candidate information for general events or campaigns.
Reference:
1: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
2: Get certified in SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Learning
3: Creating and Editing Data Capture Forms | SAP Help Portal
4: Application Template | SAP Help Portal
5: Candidate Profile Template | SAP Help Portal
[6]: Create an Account Page | SAP Help Portal
NEW QUESTION # 49
What are some leading practices to distribute jobs for SAP SuccessFactors Recruiting customers?Note: There are 2 correct answers to this question.
- A. Job scrapes
- B. Recruiting Posting
- C. Automated OData feeds
- D. Automated XML feeds
Answer: B,D
Explanation:
Some leading practices to distribute jobs for SAP SuccessFactors Recruiting customers are:
Automated XML feeds: This is a method of sending job data from SAP SuccessFactors Recruiting to external job boards or aggregators in a standardized format. XML feeds can be configured to run on a scheduled basis, and can include filters and parameters to control the data that is sent. XML feeds can improve the accuracy, timeliness, and reach of your job postings, and can also enable tracking and reporting of the source of candidates.
Recruiting Posting: This is a feature of SAP SuccessFactors Recruiting that allows you to post jobs to multiple job boards or aggregators with a single click. Recruiting Posting can be accessed from the Job Requisition page, where you can select the channels, countries, and languages for your job postings. Recruiting Posting can save you time and money, and can also provide analytics and insights on the performance of your job postings.
Automated OData feeds and job scrapes are not leading practices to distribute jobs for SAP SuccessFactors Recruiting customers. OData feeds are used to extract data from SAP SuccessFactors Recruiting for reporting or integration purposes, but they are not designed to send job data to external sites. Job scrapes are methods of extracting job data from your career site by external job boards or aggregators, but they are not reliable, secure, or consistent, and they may not capture all the relevant data or reflect the latest changes. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration HR840 - SAP SuccessFactors Recruiting: Recruiter Experience Administration
NEW QUESTION # 50
What are some leading practices when creating a color palette for the Career Site Builder site?Note: There are 3 correct answers to this question.
- A. Enter a label for each color in your customer's color palette.
- B. Create colors using the color picker grid or by typing in the RGB or hex code.
- C. Add colors for all brands that will be needed for a multi-branded site.
- D. Archive colors that are only used in the header and footer.
- E. Use the opacity slide to lighten a color in your palette instead of creating a new color.
Answer: A,B,E
Explanation:
Option B is correct because you can create colors for your Career Site Builder site using the color picker grid or by typing in the RGB or hex code. This gives you more flexibility and precision in choosing the colors that match your customer's branding and design1.
Option C is correct because you can use the opacity slide to lighten a color in your palette instead of creating a new color. This helps you save space in your palette and avoid having too many similar colors1.
Option D is incorrect because you should not archive colors that are only used in the header and footer. Archiving a color will remove it from your palette and from any components that use it. This can cause errors and inconsistencies in your site design1.
Option E is correct because you should enter a label for each color in your customer's color palette. This helps you identify and organize the colors in your palette and makes it easier to apply them to the components in your site1.
Option A is incorrect because you should not add colors for all brands that will be needed for a multi-branded site. You should create separate color palettes for each brand and assign them to the corresponding site settings. This allows you to manage the colors for each brand independently and avoid confusion and duplication1.
Reference:
1: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
2: 1H 2023 Release Highlights: Talent Acquisition Innovations and Enhancements | SAP Blogs
3: Career Site Builder Global Settings and Global Styles | SAP Help Portal
NEW QUESTION # 51
Move to Production
When moving a Career Site Builder site to production, which four XML files must you export for the move to production?
- A. Candidate Profile, Site Settings, Translations, Category pages
- B. Content pages, Category pages, Job Layouts, Career Site Builder Settings
- C. Site Settings, Career Site Builder Settings, Category pages, Translations
- D. Site Settings, Career Site Builder Settings, Content pages, Translations
Answer: C
Explanation:
Option B is correct because when moving a Career Site Builder site to production, you need to export four XML files: Site Settings, Career Site Builder Settings, Category pages, and Translations1. These files contain the configuration and content of your site, such as the site name, URL, logo, theme, layout, language, categories, and pages1.
Option A is incorrect because Content pages and Job Layouts are not required to export for the move to production. Content pages are automatically generated from the Category pages, and Job Layouts are part of the Career Site Builder Settings1.
Option C is incorrect because Candidate Profile is not an XML file that can be exported from Career Site Builder. Candidate Profile is a feature that allows candidates to create and manage their profiles on the career site.
Option D is incorrect because Content pages are not required to export for the move to production, as explained above.
Reference:
1: 1H 2023 Release Highlights: Talent Acquisition Innovations and Enhancements | SAP Blogs
2: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
3: HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration | SAP Training
[4]: SAP SuccessFactors Recruiting | SAP Help Portal
NEW QUESTION # 52
What are some of the responsibilities of a functional consultant on a Career Site Builder (CSB) implementation?Note: There are 2 correct answers to this question.
- A. Work with the customer to develop a job distribution strategy.
- B. Upsell additional solutions to the customer.
- C. Ensure that the job data supports the customer's recruiting strategy.
- D. Build the customer's CSB site using custom plugins.
Answer: A,C
Explanation:
Based on the web search results, some of the responsibilities of a functional consultant on a CSB implementation are:
Work with the customer to develop a job distribution strategy. This involves understanding the customer's business goals, target audience, and recruitment channels, and helping them to optimize their job postings and campaigns across various platforms, such as job boards, social media, and search engines12.
Ensure that the job data supports the customer's recruiting strategy. This involves analyzing the job requisitions, job descriptions, and job classifications, and ensuring that they are consistent, accurate, and compliant with the customer's requirements and standards. It also involves configuring the CSB site to display the job data in a user-friendly and accessible way, using features such as search filters, job alerts, and job recommendations3 .
Upsell additional solutions to the customer is not a responsibility of a functional consultant on a CSB implementation. This is more likely to be a role of a sales or account manager, who would identify the customer's needs and offer them additional products or services that could enhance their experience or solve their problems.
Build the customer's CSB site using custom plugins is not a responsibility of a functional consultant on a CSB implementation. This is more likely to be a role of a technical consultant or a developer, who would create and implement custom code or plugins to extend the functionality or appearance of the CSB site, according to the customer's specifications or requests.
NEW QUESTION # 53
What tasks related to job distribution are you responsible for?Note: There are 3 correct answers to this question.
- A. Conduct the job delivery intake meeting.
- B. Deliver jobs directly to compliance job boards.
- C. Work with job boards to arrange special pricing for your customer.
- D. Create the customer's standard XML feeds.
- E. Train your customers how to populate their preferred sources in the Career Site Builder Site Source Editor.
Answer: A,D,E
Explanation:
Conduct the job delivery intake meeting. This is the first step in the job delivery process, where you gather the customer's requirements and expectations for job distribution, such as the target job boards, the budget, the frequency, and the tracking methods1.
Create the customer's standard XML feeds. This is the second step in the job delivery process, where you configure the XML feeds that will deliver the jobs from the customer's SAP SuccessFactors Recruiting system to the selected job boards2. You can use the Job Delivery Toolkit to create and test the XML feeds3.
Train your customers how to populate their preferred sources in the Career Site Builder Site Source Editor. This is the final step in the job delivery process, where you teach the customers how to manage their preferred sources, such as job boards, social media, and employee referrals, in the Career Site Builder Site Source Editor4. This allows the customers to control which sources are displayed on their career site and how they are tracked.
Reference:
1: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 8: Job Delivery, Lesson: Job Delivery Process Overview
2: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 8: Job Delivery, Lesson: XML Feeds
3: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 8: Job Delivery, Lesson: Job Delivery Toolkit
4: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 8: Job Delivery, Lesson: Site Source Editor
[5]: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 8: Job Delivery, Lesson: Preferred Sources
NEW QUESTION # 54
What results can you expect if the sitewide metadata is set up as shown below in Career Site Builder (CSB)?
Note: There are 2 correct answers to this question.
- A. When a user opens the home page for the site, Jobs at Best Run will display on the browser tab.
- B. Assuming that metadata leading practices have been followed, when a user opens a Category page on the site, Jobs at Best Run will display on the browser tab.
- C. Populating the Meta Keywords field is much more important that using keywords in the page content.
- D. When Jobs at Best Run is returned in search engine results, it will display as a link to the CSB site.
Answer: A,D
Explanation:
The sitewide metadata in Career Site Builder (CSB) is crucial for enhancing the visibility and accessibility of the site on search engines and for users. If "Jobs at Best Run" is set as the Page Title, it will display on the browser tab when a user opens the home page for the site (Option A). Additionally, when "Jobs at Best Run" appears in search engine results, it will serve as a clickable link directing users to the CSB site (Option B). Option C is incorrect because using keywords in page content is equally important as populating the Meta Keywords field for SEO. Option D is incorrect because metadata leading practices involve specific titles for different pages to enhance SEO. Reference: [SAP SuccessFactors Recruiting: Candidate Experience Administration], Unit 6: Site Setup, Lesson: Site Metadata, Slide 4-5.
NEW QUESTION # 55
Which of the following are leading practices regarding the Source Tracker functionality?Note: There are 3 correct answers to this question.
- A. Adding a tracking link enables reporting in Advanced Analytics for manually posted jobs.
- B. Before a recruiter manually posts a job online, they should generate a tracking link from Recruiting > Source Tracker > Campaign URL Builder.
- C. If a source that the customer requests is NOT available to enable in the Site Source Editor, submit a support ticket to request that the source be created.
- D. When setting up the Source Tracker for your customer, always enable all possible sources.
- E. Enable your customer's Source Tracker options from Command Center.
Answer: A,B,E
Explanation:
The Source Tracker functionality allows you to track the effectiveness of your sourcing channels and campaigns by generating unique tracking links for each job posting. These links can be used to manually post jobs on external sites, such as social media, job boards, or email campaigns. The tracking links capture the source of the candidates who apply through them, and enable reporting in Advanced Analytics for manually posted jobs. You can generate tracking links from Recruiting > Source Tracker > Campaign URL Builder, where you can select the job requisition, the source, and the campaign name. You can also enable your customer's Source Tracker options from Command Center, where you can configure the default source, the source expiration, and the source attribution. You can also edit the sources that are available to select from the Site Source Editor. You should not enable all possible sources, as this may cause confusion and inaccurate data. You should only enable the sources that are relevant and useful for your customer. If a source that the customer requests is not available to enable in the Site Source Editor, you can submit a support ticket to request that the source be created. Reference:
SAP SuccessFactors Recruiting: Candidate Experience 2H/2023
SAP SuccessFactors Recruiting: Candidate Experience Academy
[Reviewing the Candidate Experience in SAP SuccessFactors Recruiting]
NEW QUESTION # 56
What are some of the ways that candidates can be added to a talent pool?Note: There are 3 correct answers to this question.
- A. Auto-populate from a saved search.
- B. Add from an email campaign.
- C. Add from the Candidate Workbench (Talent Pipeline page).
- D. Candidates can add themselves.
- E. Add from a Candidate Search.
Answer: A,C,E
Explanation:
Candidates can be added to a talent pool from the following sources:
Candidate Workbench (Talent Pipeline page): You can manually add candidates to a talent pool from the Talent Pipeline page, which shows all the candidates who have applied to your jobs or have been sourced by you or your team12.
Auto-populate from a saved search: You can create a saved search based on certain criteria and assign it to a talent pool. This will automatically add any candidates who match the criteria to the talent pool13.
Add from a Candidate Search: You can perform a candidate search using keywords, filters, or Boolean operators and add the search results to a talent pool14.
You cannot add candidates to a talent pool from an email campaign or allow candidates to add themselves. Email campaigns are used to communicate with candidates who are already in a talent pool1 . Candidates can only join a talent community, which is a broader group of candidates who have expressed interest in your company, but not a specific job or talent pool1 . Reference: SAP SuccessFactors Recruiting: Candidate Experience Administration, Unit 5: Candidate Relationship Management, Lesson: Talent Pools, pages 5-3 to 5-9.
NEW QUESTION # 57
When setting up Real Time Job Sync, where will you find the values to populate the Service Provider Settings in Provisioning?Note: There are 2 correct answers to this question.
- A. The URLs, Username, and Password are from CSB > Tools > Manage API Credentials.
- B. The Security Key is from CSB > Settings > Site Configuration > Site Integrations.
- C. API Key is from CSB > Settings > Site Configuration > Site Integrations.
- D. The API Key, Username, and Password are from CSB > Tools > Manage API Credentials.
Answer: A,C
Explanation:
When setting up Real Time Job Sync, the values to populate the Service Provider Settings in Provisioning can be found in two places:
The URLs, Username, and Password are from CSB > Tools > Manage API Credentials1. The Manage API Credentials page allows you to enter or modify authentication information that connects SAP SuccessFactors Recruiting with Career Site Builder for Real Time Job Sync1.
The API Key is from CSB > Settings > Site Configuration > Site Integrations2. The Site Integrations page provides information about the integration between your career site instance and SAP SuccessFactors2
NEW QUESTION # 58
Other Career Site Setup
When Mobile Apply is enabled for Career Site Builder, which elements are consolidated onto a single page for candidates to complete?Note: There are 2 correct answers to this question.
- A. People profile templates
- B. Application template
- C. Offer approval template
- D. Candidate profile template
Answer: B,D
Explanation:
Option C is correct because when Mobile Apply is enabled for Career Site Builder, the application template is consolidated onto a single page for candidates to complete. The application template contains the fields and questions that the candidates need to fill out when applying for a job. The Mobile Apply feature simplifies the application process by reducing the number of pages and clicks that the candidates have to go through on their mobile devices1.
Option D is correct because when Mobile Apply is enabled for Career Site Builder, the candidate profile template is consolidated onto a single page for candidates to complete. The candidate profile template contains the fields and questions that the candidates need to fill out when creating or updating their profile on the career site. The Mobile Apply feature also simplifies the profile creation and update process by reducing the number of pages and clicks that the candidates have to go through on their mobile devices1.
Option A is incorrect because when Mobile Apply is enabled for Career Site Builder, the people profile templates are not consolidated onto a single page for candidates to complete. The people profile templates are used to define the fields and sections that appear on the people profile page in the SAP SuccessFactors platform. The people profile page is not part of the career site or the Mobile Apply feature2.
Option B is incorrect because when Mobile Apply is enabled for Career Site Builder, the offer approval template is not consolidated onto a single page for candidates to complete. The offer approval template is used to define the fields and sections that appear on the offer approval page in the SAP SuccessFactors platform. The offer approval page is not part of the career site or the Mobile Apply feature3.
Reference:
1: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
2: Get certified in SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Learning
3: HR832 - SAP SuccessFactors Recruiting: Candidate Experience Administration | SAP Training
4: People Profile | SAP Help Portal
5: Offer Approval | SAP Help Portal
NEW QUESTION # 59
Replacing the search grid in Career Site Builder with tiles achieves which of the following? Note: There are 2 correct answers to this question.
- A. It allows users to share jobs on social media more easily.
- B. It allows users to tab through the search results.
- C. It allows any of the mapped fields to be displayed on the tiles.
- D. It allows any of the fields on the job requisition to be displayed on the tiles.
Answer: C,D
Explanation:
According to the SAP Help Portal1, replacing the search grid in Career Site Builder with tiles achieves the following benefits:
It allows any of the mapped fields to be displayed on the tiles. You can customize the tile layout and content by selecting the fields you want to show from the list of available fields in the Search Tiles tab in Appearance Styles Global Styles (Brand)1.
It allows any of the fields on the job requisition to be displayed on the tiles. You can also use the custom fields that you have created in the job requisition template as part of the tile content1.
It does not allow users to tab through the search results. This is a feature of the grid layout, which enables keyboard navigation through the search results2. For that reason, the tile layout is not recommended for accessibility purposes3.
It does not allow users to share jobs on social media more easily. This is a feature of the Job Details component, which enables users to share the job posting on various social media platforms. This component can be used in both grid and tile layouts. Reference: Search Tiles Settings in Career Site Builder Global Styles, Search-Related Settings in Career Site Builder, Configuring Search Grid Settings, [Job Details Component]
NEW QUESTION # 60
Configure Locales
Manage Languages in Admin Center must be used to change translated labels for which of the following that are accessed from Career Site Builder sites?
- A. Search bar
- B. Job alerts email template
- C. Data capture form
- D. Create an Account page
Answer: D
Explanation:
Option C is correct because Manage Languages in Admin Center must be used to change translated labels for the Create an Account page that is accessed from Career Site Builder sites. The Create an Account page is the page that candidates see when they click on the Create an Account button on the career site. The labels on this page, such as the field names, buttons, and messages, are controlled by the Manage Languages tool in Admin Center. You can use this tool to edit the existing translations or add new translations for the labels on this page1.
Option A is incorrect because Manage Languages in Admin Center cannot be used to change translated labels for the job alerts email template that is accessed from Career Site Builder sites. The job alerts email template is the template that defines the content and layout of the email that candidates receive when they subscribe to job alerts on the career site. The labels on this template, such as the subject, header, footer, and unsubscribe link, are controlled by the Email Template Editor in Command Center. You can use this tool to edit the existing translations or add new translations for the labels on this template2.
Option B is incorrect because Manage Languages in Admin Center cannot be used to change translated labels for the search bar that is accessed from Career Site Builder sites. The search bar is the component that allows candidates to search for jobs on the career site using keywords, filters, and facets. The labels on this component, such as the placeholder text, filter names, and facet values, are controlled by the Search Bar Settings in Career Site Builder. You can use this tool to edit the existing translations or add new translations for the labels on this component3.
Option D is incorrect because Manage Languages in Admin Center cannot be used to change translated labels for the data capture form that is accessed from Career Site Builder sites. The data capture form is the tool that collects candidate information on a landing page without requiring them to create an account or submit an application. The labels on this tool, such as the field names, buttons, and messages, are controlled by the Data Capture Form Editor in Command Center. You can use this tool to edit the existing translations or add new translations for the labels on this tool.
Reference:
1: SAP Certified Application Associate - SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Training Certification
2: Get certified in SAP SuccessFactors Recruiting: Candidate Experience 1H/2023 | SAP Learning
3: Manage Languages | SAP Help Portal
4: Configuring Job Alerts | SAP Help Portal
5: Configuring the Search Bar | SAP Help Portal
[6]: Creating and Editing Data Capture Forms | SAP Help Portal
NEW QUESTION # 61
What should you consider regarding mapping candidate statuses for Advanced Analytics?Note: There are 2 correct answers to this question.
- A. With some exceptions, if a status is NOT mapped when the OData integration is run, the sync will fail.
- B. Any status that indicates that the candidate was NOT hired, such as Automatically Disqualified, does NOT need to be mapped.
- C. Status mappings can only be completed when there is candidate data associated with each status on the Talent Pipeline.
- D. After saving the status mappings in Command Center, you can correct mapping errors as long as you do it during the same session.
Answer: A,D
Explanation:
According to the SAP Help Portal1, you should consider the following regarding mapping candidate statuses for Advanced Analytics:
Any status that indicates that the candidate was NOT hired, such as Automatically Disqualified, does need to be mapped. This is because all statuses must be mapped to one of the five standard statuses in Advanced Analytics: Apply Completed, Qualified, Interviewed, Offer Made, or Hired. If you have multiple not hired statuses, you can map them to ATS Capture, which is a hidden status that does not appear in the reports1.
After saving the status mappings in Command Center, you can correct mapping errors as long as you do it during the same session. This is because the status mappings are not pushed to the Advanced Analytics database until you log out of Command Center or close the browser. If you need to make any changes after logging out, you must contact SAP Customer Support to request a data purge and re-sync1.
With some exceptions, if a status is NOT mapped when the OData integration is run, the sync will fail. This is because the OData integration requires that all statuses are mapped to ensure data consistency and accuracy. The exceptions are when you have a new status that has not been used by any candidates yet, or when you have a status that is not used by any active job requisitions. In these cases, the sync will not fail, but you will receive a warning message and you should map the status as soon as possible1.
Status mappings can be completed even when there is no candidate data associated with each status on the Talent Pipeline. This is because the status mappings are based on the status names and not on the candidate data. You can map any status that exists in your Recruiting Management system, regardless of whether it has been used by any candidates or not1.
NEW QUESTION # 62
Career Site Builder Pages and Components
What are some leading practices when creating Category pages?Note: There are 3 correct answers to this question.
- A. Page titles should end with the word Jobs or Careers for better search engine optimization (SEO).
- B. Category pages contain different headers and footers than the Home page.
- C. Category pages host minimal content to allow candidates to find jobs quickly and easily.
- D. Category pages do NOT contain jobs that appear on other Category pages.
- E. Category pages use the same design layout to provide a consistent user experience.
Answer: A,C,E
Explanation:
Some leading practices when creating Category pages are:
Page titles should end with the word Jobs or Careers for better search engine optimization (SEO). This will help the career site rank higher in search engines and attract more candidates1.
Category pages use the same design layout to provide a consistent user experience. This will make the career site look professional and easy to navigate2.
Category pages host minimal content to allow candidates to find jobs quickly and easily. This will reduce the cognitive load and increase the conversion rate of the candidates3.
The other options are not leading practices when creating Category pages:
Category pages contain different headers and footers than the Home page. This will create confusion and inconsistency for the candidates and may affect the branding of the career site.
Category pages do NOT contain jobs that appear on other Category pages. This will limit the exposure and visibility of the jobs and may prevent candidates from finding the best fit for their skills and interests.
NEW QUESTION # 63
......
SAP C_THR84_2405 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Pass Your SAP Certified Associate C_THR84_2405 Exam on Oct 31, 2024 with 90 Questions: https://www.validvce.com/C_THR84_2405-exam-collection.html
C_THR84_2405 Free Exam Study Guide! (Updated 90 Questions): https://drive.google.com/open?id=19yK787LdlVeB2oOOpqmm--R-DjxrBJSn
