Pass HPE0-V26 Exam in First Attempt Guaranteed 2024 Dumps!
HPE0-V26 Dumps Full Questions - Exam Study Guide
NEW QUESTION # 28
Match the RAID level to the number of drive failures an array can handle without losing data. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
* RAID 1: any single drive
* RAID 1 ADM: any two drives
* RAID 5: any single drive
* RAID 6: any two drives
* RAID 1: This is a level of RAID that uses mirroring to create an exact copy of data on two or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drive is still functional.
* RAID 1 ADM: This is a level of RAID that uses advanced data mirroring to create two copies of data on three disks. It can tolerate the failure of any two drives without losing data, as long as the third drive is still functional.
* RAID 5: This is a level of RAID that uses striping with parity to distribute data and parity information across three or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drives can reconstruct the data from the parity information.
* RAID 6: This is a level of RAID that uses striping with double parity to distribute data and two sets of parity information across four or more disks. It can tolerate the failure of any two drives without losing data, as long as the other drives can reconstruct the data from the double parity information.
NEW QUESTION # 29
Review the Exhibit:
Match the definition to each colored boxed acronym from the image.
Answer:
Explanation:
Explanation
p: Class of Raid Controller
4: Number of SAS lanes
16: Smart Array Series
ie: Port Type
m: Controller Type (form factor)
HPE Smart Array P416ie-m SR Gen10 Controller is a flexible Smart Array controller that provides enterprise-class storage performance, increased internal scalability with SAS Expander Card, and data protection for HPE Synergy Compute Modules. The controller has these features:
* p: The P stands for Performance class, which indicates that the controller has high performance and reliability for demanding workloads.
* 4: The 4 indicates that the controller has four SAS lanes per port, which means that it can support up to four SAS devices per port.
* 16: The 16 indicates that the controller belongs to the 16th generation of Smart Array controllers, which offer enhanced security, performance, and manageability.
* ie: The ie stands for internal/external, which means that the controller has both internal and external ports. The internal ports connect to the drives inside the compute module, while the external ports connect to the SAS Expander Card or external storage devices.
* m: The m stands for mezzanine, which means that the controller is a mezzanine card that plugs into a dedicated slot on the compute module.
NEW QUESTION # 30
Your customer needs a server a maximum Of two processors that will provide high performance, manageability, expansion, and security.
Which server should you recommend?
- A. DL20
- B. DL110
- C. DL560
- D. DL380
Answer: D
Explanation:
HPE ProLiant DL380 Gen10 server is a versatile 2U rack server that delivers world-class performance and security for a wide range of workloads. The server supports up to two Intel Xeon Scalable processors with up to 28 cores per processor and up to 3 TB of memory. The server also offers a range of management, expansion, and security features, such as:
HPE iLO 5 software for remote management and monitoring HPE Smart Array controllers for RAID configuration and data protection HPE SmartMemory for enhanced performance and reliability HPE Flexible Slot power supplies for efficiency and redundancy HPE FlexibleLOM adapters for network connectivity options HPE Persistent Memory for fast data access and analytics HPE Secure Boot and Secure Start for firmware validation and protection
NEW QUESTION # 31
Your customer asks you to explain the benefits that the HPE GreenLake consumption model can provide.
Match the GreenLake benefits to their outcomes.
Answer:
Explanation:
* Managed by HPE and HPE Partners: Allows customer IT employees to be more productive within an organization
* Pay-per-use: Provides financial flexibility for customers, frees up capital, and provides better control costs
* Scale up and down: Manages capacity ahead of demand and allows customers to easily add resources when they are needed
* Self-service: Provides customers with a simple point-and-click automated provisioning
* https://www.hpe.com/psnow/doc/a00029675enw?jumpid=in_lit-psnow-red
* https://www.techtarget.com/searchdatacenter/feature/What-is-HPE-GreenLake-and-how-does-it-work
* https://www.turn-keytechnologies.com/blog/article/how-hpe-greenlakes-consumption-model-is-transformi
NEW QUESTION # 32
Your customer has multiple workloads that they want to move from a Cloud service prover to an on- premises datacenter. They like the flexibility of their current provider but want dedicated hardware and the ability to scale up and down as business needs change.
Which platform is designed for this customer use case?
- A. HPE Ezmeral Container platform
- B. HPE Superdome Flex platform
- C. HPE Apollo Systems
- D. HPE GreenLake platform
Answer: D
Explanation:
HPE GreenLake is an edge-to-cloud platform that delivers cloud services to any location. The platform offers:
- A flexible consumption model that allows customers to pay only for what they use
- A scalable and secure infrastructure that can handle any workload
- A cloud-like experience that simplifies operations and management
- A wide range of services for compute, storage, networking, data protection, and more By migrating to HPE GreenLake, the customer can move their workloads from a cloud service provider to an on-premises data center with dedicated hardware and the ability to scale up and down as business needs change. The customer can also benefit from the agility, performance, and innovation of the cloud services offered by HPE GreenLake.
NEW QUESTION # 33
your customer is looking for a reference architecture from HPE.
Which tool can translate their requirements a validated configuration?
- A. HPE storage STaTS TOOI
- B. One Config Simple (OCS)
- C. solution sales Enablement TOOI (SSET)
- D. one config Advanced (OCA)
Answer: C
Explanation:
Explanation
Solution Sales Enablement Tool (SSET) is a tool that helps you design and validate HPE solutions based on reference architectures. The SSET can translate customer requirements into a validated configuration that meets their needs and budget. The SSET can also generate a bill of materials, a quote, and a proposal for the solution.
NEW QUESTION # 34
You connect to the compute ops Management (COM) through the Green lake Cloud Platform dashboard. The server you want to manage is missing Click where you can add the server so it appears in the CoM.
Answer:
Explanation:
NEW QUESTION # 35
Drag and Drop Question
Match the preconfigured HPE workload profile with its definition.
Answer:
Explanation:
NEW QUESTION # 36
Your customer is looking for a reference architecture from HPE.
Which tool can translate their requirements a validated configuration?
- A. HPE storage STaTS TOOI
- B. One Config Simple (OCS)
- C. solution sales Enablement TOOI (SSET)
- D. one config Advanced (OCA)
Answer: C
Explanation:
Solution Sales Enablement Tool (SSET) is a tool that helps you design and validate HPE solutions based on reference architectures. The SSET can translate customer requirements into a validated configuration that meets their needs and budget. The SSET can also generate a bill of materials, a quote, and a proposal for the solution.
NEW QUESTION # 37
A customer wants to set up a site-to-site replication using Fibre Channel to a Site that is 10 Kilometers away.
What cable must be used to achieve this?
- A. Multimode fiber optic cable
- B. Flex fiber cable
- C. Polymer optical fiber cable
- D. Single-mode fiber optic cable
Answer: D
Explanation:
This is because single-mode fiber optic cable has a small core diameter that allows only one mode of light to propagate. This reduces signal attenuation and enables longer transmission distances than multimode fiber optic cable, which has a larger core diameter that allows multiple modes of light to propagate. Single-mode fiber optic cable can support distances up to 40 kilometers for Fibre Channel applications.
NEW QUESTION # 38
What value does deploying workloads on HPE GreenLake provide? (Select two.)
- A. Capacity on demand licensing model
- B. Foundation Care support
- C. Pay for resources consumed
- D. capacity ahead Of demand
- E. Single-pane management interface with OneView for storage and server management
Answer: C,D
Explanation:
Explanation
HPE GreenLake is a cloud services platform that delivers on-demand capacity and planning, combining the agility and economics of the public cloud with the security and performance of on-premises IT. Some of the benefits of HPE GreenLake include:
* Pay for resources consumed: HPE GreenLake offers a pay-per-use model that aligns costs with actual usage, reducing overprovisioning and improving cash flow. Customers can also scale up or down as needed and only pay for what they use.
* Capacity ahead of demand: HPE GreenLake provides customers with buffer capacity that is ready to use in minutes, not months, enabling them to respond quickly to changing business needs. Customers can also access a range of cloud services from HPE and partners through a self-service portal.
NEW QUESTION # 39
Match the RAID level with its capacity overhead. (Each option may be used once, more than once, or not at all.)
Answer:
Explanation:
* RAID 0: This level has zero overhead from capacity perspective, as it uses all the available disk space for data storage without any redundancy or parity. However, it also has no fault tolerance and if one disk fails, all data is lost12.
* RAID 1: This level has capacity of one drive as overhead, as it uses disk mirroring to create an exact copy of data on two or more disks. This provides high reliability and fault tolerance, but reduces the usable disk space by half12
* RAID 5: This level has capacity of one drive as overhead, as it uses disk striping with parity to distribute data and parity blocks across three or more disks. This provides a balance between performance and reliability, as it can tolerate one disk failure without losing data
* RAID 6: This level has capacity of two drives as overhead, as it uses disk striping with double parity to distribute data and two parity blocks across four or more disks. This provides higher reliability and fault tolerance than RAID 5, as it can tolerate two disk failures without losing data12.
NEW QUESTION # 40
Your customer IS interested in me new MSA storage array and asks tor a demo of the features and monitoring capabilities.
Which tool should you use?
- A. HPE StoreServ Management console (SSMC)
- B. HPE Storage Management Utility (SMU)
- C. HPE InfoSight
- D. HPE Data serves Cloud console (DSCC)
Answer: B
Explanation:
According to HPE, SMU is a web-based interface that enables you to configure, monitor, and manage storage devices. It also provides performance monitoring and reporting for HPE MSA storage arrays. With SMU, you can demonstrate the features and monitoring capabilities of the new MSA storage array to your customer.
NEW QUESTION # 41
Your customer wants a new server tor a File & print workload.
What are the most important factors to consider? (Select two.)
- A. power supply wattage
- B. form factor
- C. support level
- D. transfer rate
- E. storage capacity
Answer: B,E
Explanation:
Explanation
This is because a file and print workload requires a server that can store and share large amounts of data with multiple users and devices. Therefore, the server should have enough storage capacity to meet the current and future data needs of the customer. The form factor of the server also matters because it determines how much space the server occupies and how easy it is to install and maintain. Depending on the customer's preferences and constraints, they may choose a tower, rack or blade server.
NEW QUESTION # 42
What is a feature Of the MSA 2060 storage array?
- A. Gains Al and machine learning operational through InfoSight
- B. Deduplication and compression are non-intrusive and in-line
- C. Encryption can be enabled by adding 2 self-encrypted drives through Full Disk Encryptbn
- D. Supports a mixture Of both SSD and HDDs within the same system
Answer: D
Explanation:
This is because the HPE MSA 2060 Storage solution supports a mixture of 3.5 inch LFF and 2.5 inch SFF expansion enclosures for a maximum of 9 enclosures (10 total including the array). You can start small and scale as needed with any combination of SSDs, Enterprise SAS or MidLine SAS HDDs.
NEW QUESTION # 43
Your customer needs a server a maximum Of two processors that will provide high performance, manageability, expansion, and security.
Which server should you recommend?
- A. DL20
- B. DL110
- C. DL560
- D. DL380
Answer: D
Explanation:
Explanation
HPE ProLiant DL380 Gen10 server is a versatile 2U rack server that delivers world-class performance and security for a wide range of workloads. The server supports up to two Intel Xeon Scalable processors with up to 28 cores per processor and up to 3 TB of memory. The server also offers a range of management, expansion, and security features, such as:
* HPE iLO 5 software for remote management and monitoring
* HPE Smart Array controllers for RAID configuration and data protection
* HPE SmartMemory for enhanced performance and reliability
* HPE Flexible Slot power supplies for efficiency and redundancy
* HPE FlexibleLOM adapters for network connectivity options
* HPE Persistent Memory for fast data access and analytics
* HPE Secure Boot and Secure Start for firmware validation and protection
NEW QUESTION # 44
You are troubleshooting a server issue and need to reference a log file tor hardware and configuration changes.
When log file should you review?
- A. HPE OneView Activity Log
- B. AHS - Active Health system
- C. IML - Integrated Management Log
- D. ILO Event Log
Answer: B
Explanation:
Explanation
Active Health System (AHS) is a feature that continuously monitors and records thousands of system parameters and diagnostic telemetry data on HPE ProLiant servers. The AHS log contains information such as hardware and configuration changes, health status, boot issues, and firmware updates. The AHS log can be used for troubleshooting and analysis by HPE support or by the user.
NEW QUESTION # 45
A customer who is new to HPE wants to refresh the hardware infrastructure for their VMware environment.
Before meeting the customer, you need to perform an assessment to get a better of their environment Which HPE tool should you use?
- A. OneView
- B. GreenLake QuiCk Quote
- C. CloudPhysics
- D. InfoSight
Answer: C
Explanation:
Explanation
CloudPhysics is a tool that provides a comprehensive assessment of VMware environments and helps identify opportunities for optimization and modernization. CloudPhysics can also generate a ready-to-order bill of materials for HPE solutions based on the customer's workload requirements.
The other options do not seem to be suitable for performing an assessment of a VMware environment. OneView is a tool for managing HPE servers, storage, and networking2. GreenLake Quick Quote is a tool for creating quotes for HPE GreenLake services3. InfoSight is a tool for monitoring and managing HPE storage systems.
NEW QUESTION # 46
Your customer has multiple, remote sales offices with one HPE ProL1ant server deployed per Site to run local IT services. They want to centralize the monitoring ana lifecycle management of these servers using a cloud-based offering.
Which tool would demonstrate this functionality?
- A. HPE GreenLake Compute Ops Management
- B. HPE CloudPhysics
- C. HPE GreenLake Data Services Cloud Console
- D. HPE InoSight
Answer: D
Explanation:
Explanation
According to HPE, HPE InfoSight is a cloud-based AI platform that delivers global visibility and insights into the health, performance, and capacity of your HPE storage and servers. It can also centralize the monitoring and lifecycle management of multiple HPE ProLiant servers deployed in remote sites using a single dashboard
1. With HPE InfoSight, you can demonstrate how to simplify and optimize your customer's IT operations from edge to cloud.
NEW QUESTION # 47
Your customer has standardized on the AMD platform and asks for a new I IJ server.
Which server should you recommend?
- A. DL385
- B. DL360
- C. DL365
- D. DL560
Answer: C
NEW QUESTION # 48
your customer wants to update the firmware tor multiple HPE proLiant MicroServer Gen10 Plus servers.
Which tool must be used?
- A. HPE Composer
- B. HPE GreenLake central
- C. HPE ILO 5
- D. HPE Data Services Cloud console
Answer: C
Explanation:
Explanation
According to HPE, iLO 5 is a remote management solution that enables you to configure, monitor, and update your HPE servers seamlessly from anywhere in the world1. It also provides firmware update capabilities for HPE ProLiant MicroServer Gen10 Plus servers2. With iLO 5, you can demonstrate how to update the firmware for multiple servers easily and securely.
NEW QUESTION # 49
An RFP states that the database server requires two processors out must De available to scale to four inside a 2U chassis.
Which server would satisfy the customer requirements?
- A. TWO DL380 Gen 10 servers
- B. DL580 Gen10 server
- C. Two DL360 Gen10 servers
- D. DL560 Gen10 server
Answer: D
Explanation:
This is because the HPE ProLiant DL560 Gen10 server is a 2U rack server that supports up to four Intel Xeon Scalable processors with up to 48 cores per processor. It also supports up to 6 TB of memory and up to 12 LFF or 24 SFF drives.1 It can satisfy the customer requirements of having two processors and scaling to four inside a 2U chassis.
NEW QUESTION # 50
Your customer has an existing MSA 2060 with 20 SAS drives. They want to enhance the performance by adding SSD drives in the four remaining slots.
What mandatory option must be sold with the four SSD drives?
- A. HPE MSA Health Check Tool
- B. HPE PointNext Advisory & professional services
- C. HPE Advanced Data services suite license
- D. HPE Data Services Cloud Console subscription
Answer: C
Explanation:
According to HPE, this license enables advanced features such as performance tiering and RAID tier affinity for HPE MSA 2060 storage arrays. These features can help enhance the performance of SSD drives by automatically moving hot data to faster drives and keeping data on the same RAID group.
NEW QUESTION # 51
......
Hybrid Cloud Free Certification Exam Material from ValidVCE with 66 Questions: https://www.validvce.com/HPE0-V26-exam-collection.html
Use Real HPE0-V26 - 100% Cover Real Exam Questions: https://drive.google.com/open?id=1yE1Y45Q1O3vRo2R75566f6rC5i7gU6mt
