Verified ANVE dumps Q&As - Pass Guarantee or Full Refund [Jul-2026]
ANVE PDF Dumps | Jul 25, 2026 Recently Updated Questions
NEW QUESTION # 75
Axis Networking Basics Guide
- A. It controls which recipients get access to a stream from an Axis device
- B. It requires viewers to log in before watching video streams from an Axis device
- C. It adds a small watermark to the captured footage from an Axis device
- D. It can help verify that the video data has been sent from an Axis device
Answer: D
Explanation:
"Axis signed video enables authenticity verification of exported video. The signature ensures that the video originates from a specific Axis device and that the video has not been altered after recording."
- Axis Signed Video White Paper
"Signed video from Axis devices is digitally signed in the camera to guarantee that the footage is authentic and comes from an Axis camera."
- Axis Communications Academy, Network Video Fundamentals, 2022
References:
Axis White Paper: Signed Video
Axis Communications Academy, Network Video Fundamentals, 2022How does Axis signed video increase the security of a system?
O It adds a small watermark to the captured footage from an Axis device O It controls which recipients get access to a stream from an Axis device O It can help verify that the video data has been sent from an Axis device O It requires viewers to log in before watching video streams from an Axis device
NEW QUESTION # 76
If using H.264 compression, in theory, what could a video containing no l-frames look like?
- A. All moving objects will be visible
- B. A black image is visible during the whole video
- C. The first P-frame is visible during the whole video
- D. All non-moving objects will be visible
Answer: B
Explanation:
H).264 compression uses I-frames (intra-coded frames) as reference points, with P-frames (predictive frames) and B-frames (bi-directional frames) encoding only the changes from the previous frames. If a video contained no I-frames, there would be no reference frame for decoding, resulting in an inability to display any image. This would theoretically result in a black image being visible during the whole video. Therefore, the correct answer is B. For more detailed information, refer to Axis Communications' technical notes on video compression.
NEW QUESTION # 77
The purpose of DHCP is to
- A. Translate host names such as www.axis.com to IP addresses.
- B. Allocate IP addresses to devices within a network.
- C. Allocate MAC addresses to devices within a network.
- D. Translate host names such as www.axis.com to MAC addresses.
Answer: B
Explanation:
DHCP (Dynamic Host Configuration Protocol) is a network management protocol used on IP networks. It automates the process of configuring devices on IP networks by assigning IP addresses to devices, allowing them to communicate on the network. The DHCP server dynamically assigns IP addresses from a predefined pool and leases them to devices for a specified period. This eliminates the need for manual IP configuration and helps avoid IP address conflicts. References to Axis documentation confirm that DHCP is essential for managing and automating IP address allocation in networked environments.
NEW QUESTION # 78
When using HTTPS on Axis products, true security is implemented after the
- A. 256 character password is in place.
- B. Signed certificate is installed.
- C. 64 character password is in place.
- D. MAC address filtering is activated.
Answer: B
Explanation:
True security when using HTTPS on Axis products is implemented after a signed certificate is installed. This certificate ensures that the communication between the camera and the server is encrypted and authenticated, providing a secure channel that prevents unauthorized access and tampering.
NEW QUESTION # 79
In a network surveillance installation, the purpose of a switch is to
- A. Disconnect devices with invalid IP addresses from the network.
- B. Disconnect malfunctioning cameras from the network.
- C. Forward the video stream between networks.
- D. Forward the video stream to the correct receiver within a network.
Answer: D
Explanation:
In a network surveillance installation, the primary purpose of a switch is to forward the video stream to the correct receiver within a network. This functionality ensures that the video data captured by cameras is correctly directed to the appropriate storage device, monitoring station, or viewing client within the local network. Switches operate at the data link layer (Layer 2) of the OSI model and utilize MAC addresses to ensure that data packets reach their intended destination efficiently.
NEW QUESTION # 80
Which of the following causes the image to get black corners?
- A. WDR is disabled and image is overexposed
- B. The lens is intended for a larger image sensor
- C. WDR is disabled and image is underexposed
- D. The lens is intended for a smaller image sensor
Answer: D
Explanation:
"When a lens intended for a larger sensor is used on a smaller sensor camera, the projected image circle does not fully cover the sensor area, causing vignetting or black corners in the image."
- Axis Lens Guide White Paper
"Black corners or vignetting often result from a mismatch between lens and sensor size."
- Axis Communications Academy, Network Video Fundamentals, 2022
References:
Axis Lens Guide White Paper
Axis Communications Academy, Network Video Fundamentals, 2022 (p. 34)
NEW QUESTION # 81
Match the best choice of camera to each scenario described. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
Reference: http://www.axis.com/products/video/camera/index.htm
http://www.axis.com/products/cam_q6032e/
NEW QUESTION # 82
When dealing with a poorly lit scene, which of the following options would most improve image quality?
- A. Adjusting exposure settings
- B. Adding light
- C. Adjusting brightness
- D. Changing camera placement
Answer: B
Explanation:
When dealing with a poorly lit scene, adding light is the most effective option to improve image quality.
Proper illumination ensures that the camera's sensor can capture clear and detailed images, reducing noise and enhancing visibility. While adjusting exposure settings, brightness, or changing camera placement can help, they are secondary to the fundamental requirement of adequate lighting.
Reference: Axis Communications, "Improving Image Quality in Low Light Conditions", Application Note.
NEW QUESTION # 83
What are the effects of changing the capture mode on an AXIS P1346 from 2048x1536 (3 MP) to 1920x1080 (HDTV)? (Choose two)
- A. Maximum frame rate increases
- B. Minimum illumination decreases
- C. Vertical angle of view decreases
- D. Motion blur increases
- E. Maximum frame rate decreases
Answer: A,B
Explanation:
Changing the capture mode on an AXIS P1346 from 2048x1536 (3 MP) to 1920x1080 (HDTV) affects both the minimum illumination and maximum frame rate. When switching to a lower resolution (HDTV), the camera's sensitivity to light improves, resulting in a decrease in the minimum illumination required to produce a clear image. Additionally, the maximum frame rate increases as the camera processes fewer pixels, allowing it to capture and transmit frames at a higher rate. Axis Network Video documentation provides detailed information on how different capture modes impact camera performance, including light sensitivity and frame rates.
Top of Form
Bottom of Form
NEW QUESTION # 84
What is one of the main purposes of using AXIS Camera Application Platform?
- A. Loading of applications to be run directly on the camera
- B. Loading of applications directly to the SD/SDHC card on the camera
- C. Loading a Video Management Software (VMS) to be run directly on the camera
- D. Loading of VAPIX applications directly on the camera
Answer: A
NEW QUESTION # 85
Why is the background of this scene slightly out of focus?
- A. The depth of field is too shallow
- B. The light level is too low
- C. The pixel density is too low
- D. The IR LEDs are on
Answer: A
Explanation:
The background of the scene is slightly out of focus due to a shallow depth of field. Depth of field refers to the range of distance within a photo that appears acceptably sharp. A shallow depth of field results in a narrow focus area, causing objects outside this area to appear blurred. This can be influenced by the aperture setting of the lens, the focal length, and the distance to the subject. Axis documentation on camera setup and focus adjustments provides guidance on managing depth of field to ensure optimal image clarity.
NEW QUESTION # 86
Which of these scenes can be compressed the most without losing quality?
- A. Empty office
- B. Train on tracks
- C. City skyline
- D. City street
Answer: A
Explanation:
"Scenes with large areas of uniform color and little movement, such as an empty office, are more compressible without noticeable loss in quality because there is less detail and fewer changes between frames."
- Axis Communications Academy, Network Video Fundamentals, 2022
"Static and simple scenes (e.g., an empty room) require less data and can be compressed more efficiently than complex or busy scenes."
- Axis Web Article: Video Compression
References:
Axis Communications Academy, Network Video Fundamentals, 2022 (p. 58)
Axis Web Article: Video Compression
NEW QUESTION # 87
In environments with rain or snow, an Axis bullet camera has which benefit?
- A. The weather shield is tilted with the camera, protecting the glass front
- B. The built-in wipers automatically removes any drops blocking the view
- C. The camera can vibrate to shake off any drops from the glass front
- D. The built-in IR immediately melts any snow landing on the front side
Answer: A
Explanation:
In environments with rain or snow, an Axis bullet camera benefits from having a weather shield that tilts with the camera. This shield helps protect the camera's glass front from raindrops and snow, ensuring clear visibility and reducing the need for frequent cleaning. The design helps maintain optimal image quality in various weather conditions.References: Axis Communications Bullet Camera Features
NEW QUESTION # 88
This image represents an enlargement of an actual surveillance image. How could you improve the overall quality of the image? (Choose two)
- A. Increase the image compression setting
- B. Change to a camera with higher resolution
- C. Decrease the gain setting in the camera
- D. Increase the gain setting in the camera
- E. Decrease image compression setting
Answer: B,E
NEW QUESTION # 89
A camera can deliver up to two full resolution 30 fps H.264 streams. The customer wants to have four
H.264 streams from the same camera. What will be the resulting impact?
- A. The camera will lower the resolution
- B. The camera will lower the Group of Video (GOV) length
- C. The camera will lower the frame rate
- D. The camera will lower the compression
Answer: C
NEW QUESTION # 90
Match each product name with the right description. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
Explanation:
Reference: http://www.axis.com/products/video/camera/index.htm (see the cameras series at the bottom of the page, click the ones in the question and see the descriptions)
NEW QUESTION # 91
Which network features are usually combined to prevent access to the surveillance network?
- A. Router port forwarding and VLANs
- B. IEEE 802.3ad link aggregation and HTTPS encryption
- C. Router port forwarding and IP subnets
- D. IP subnets and VLANs
Answer: D
NEW QUESTION # 92
What is the primary purpose of the accessory on this dome?
- A. It provides IP67 protection
- B. It reduces the weather impact
- C. It helps to detect tampering
- D. It helps to detect motion
Answer: B
Explanation:
The primary purpose of the accessory on this dome camera is to reduce the weather impact. This accessory, often referred to as a weather shield or rain guard, helps protect the camera lens from rain, snow, and other environmental elements, ensuring clear visibility and reducing the need for maintenance. It also helps to minimize the impact of direct sunlight, reducing glare and improving image quality.References: Axis Dome Camera Accessories
NEW QUESTION # 93
A convenience store needs a camera to cover the entrance. Identification is needed at 80 pixels per face.
Given that the scene is 2 m (6 ft 7 in) wide, which of these resolutions is the minimum one needed?
- A. 1280 X 720
- B. 800 X 600
- C. 1920 X 1080
- D. 640X480
Answer: A
Explanation:
To achieve identification at 80 pixels per face for a scene that is 2 meters (6 feet 7 inches) wide, a minimum resolution of 1280 x 720 is needed. This calculation ensures that each face captured in the frame meets the pixel density requirement for clear identification purposes.
NEW QUESTION # 94
DRAG DROP
Match the protocol to its default port number. Drag each gray box from the left column to the matching blue box in the right column.
Answer:
Explanation:
NEW QUESTION # 95
......
ANVE Exam Questions – Valid ANVE Dumps Pdf: https://www.validvce.com/ANVE-exam-collection.html
ANVE Practice Test Questions Answers Updated 346 Questions: https://drive.google.com/open?id=1LmGEitnjuUNpCFQLxpyFe5-uZN7KLre9
