Real 156-585 are Uploaded by ValidVCE provide 2021 Latest 156-585 Practice Tests Dumps.
All 156-585 Dumps and Check Point Certified Troubleshooting Expert Training Courses Help candidates to study and pass the Check Point Certified Troubleshooting Expert Exams hassle-free!
NEW QUESTION 44
What is the benefit of running "vpn debug trunc over "vpn debug on"?
- A. "vpn debug trunc" purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug
- B. No advantage one over the other
- C. "vpn debug trunc* provides verbose capture
- D. "vpn debug trunc*truncates the capture hence the output contains minimal capture
Answer: A
NEW QUESTION 45
What does SIM handle?
- A. Accelerating packets
- B. OPSEC connects to SecureXL
- C. FW kernel to SXL kernel hand off
- D. Hardware communication to the accelerator
Answer: B
NEW QUESTION 46
Select the technology that does the following actions
- provides reassembly via streaming for TCP
- handles packet reordering and congestion
- handles payload overlap
- provides consistent stream of data to protocol parsers
- A. Context Management
- B. Pre-Protocol Parser
- C. fwtcpstream
- D. Passive Streaming Library
Answer: D
NEW QUESTION 47
If you run the command "fw monitor -e accept src=10.1.1.201 or src=172.21.101.10 or src=192.0.2.10;" from the cli sh What will be captured?
- A. Packets destined to 172 21 101 10 from 10.1.1.101
- B. fw monitor only works in expert mode so no packets will be captured
- C. Only packet going to 192.0.2.10
- D. Packets from 10 1 1 201 going to 192.0 2.10
Answer: C
NEW QUESTION 48
How many captures does the command "fw monitor -p all" take?
- A. 1 from every inbound and outbound module of the chain
- B. All 15 of the inbound and outbound modules
- C. The -p option takes the same number of captures, but gathers all of the data packet
- D. All 4 points of the fw VM modules
Answer: B
NEW QUESTION 49
What are the main components of Check Point's Security Management architecture?
- A. Management server, Security Gateway. Multi-Domain Server, SmartEvent Server
- B. Management server Log server, Gateway server. Security server
- C. Management Server. Log Server. LDAP Server, Web Server
- D. Management server management database, log server, automation server
Answer: A
NEW QUESTION 50
What command is usually used for general firewall kernel debugging andwhatis the sizeofthe buffer that isautomaticallyenabled whenusingthe command?
- A. fw ctl debug, buffer sizeis 1024 KB
- B. fw ctl kdeoug. buffer sizeis 32000 KB
- C. fw dl zdebug, buffer size is 1 MB
- D. fw ell zdebug. buffer size is 32768 KB
Answer: B
NEW QUESTION 51
For TCP connections, when a packet arrives at the Firewall Kemel out of sequence or fragmented, which layer of IPS corrects this lo allow for proper inspection?
- A. Protocol Parsers
- B. Context Management
- C. Protections
- D. Passive Streaming Library
Answer: B
NEW QUESTION 52
What are some measures you can take to prevent IPS false positives?
- A. Capture packets. Update the IPS database, and Back up custom IPS files
- B. Use Recommended IPS profile
- C. Use IPS only in Detect mode
- D. Exclude problematic services from being protected by IPS (sip, H 323, etc )
Answer: D
NEW QUESTION 53
You need to runa kernel debug over a longer period of time as the problem occurs only once or twice a week.
Therefore you need to add a timestamp to the kernel debug and write the output to a file What is the correct syntax for this?
- A. fw ctl kdebug -T -f -o filename debug
- B. fw ctl kdebug -T -f > filename debug
- C. fw ctl kdebug -T > filename debug
- D. fw ctl debug -T -f > filename debug
Answer: D
NEW QUESTION 54
PostgreSQL is a powerful, open source relational database management system Check Point offers a command for viewing the database to interact with Postgres interactive shell Which command do you need to enter the PostgreSQL interactive shell?
- A. mysql_client cpm postgres
- B. mysql -u root
- C. psql_c!ieni postgres cpm
- D. psql_client cpm postgres
Answer: A
NEW QUESTION 55
The Check Pom! Firewall Kernel is the core component of the Gaia operating system and an integral part of the traffic inspection process There are two procedures available for debugging the firewall kernel Which procedure/command is used for troubleshooting packet drops and other kernel activites while using minimal resources (1 MB buffer)?
- A. fwk ctl debug
- B. fw ctl debug/kdebug
- C. fw debug ctl
- D. fw ctl zdebug
Answer: D
NEW QUESTION 56
What does CMI stand for in relation to the Access Control Policy?
- A. Context Management Infrastructure
- B. Context Manipulation Interface
- C. Content Matching Infrastructure
- D. Content Management Interface
Answer: A
NEW QUESTION 57
When a User Mode process suddenly crashes it may create a core dump file. Which of the following information is available in the core dump and may be used to identify the root cause of the crash?
i Program Counter
ii Stack Pointer
ii. Memory management information
iv Other Processor and OS flags / information
- A. D Only iii
- B. i and n only
- C. i, ii, lii and iv
- D. iii and iv only
Answer: D
NEW QUESTION 58
If the cpsemd process of SmartEvent has crashed or is having trouble coming up. then it usually indicates that___________.
- A. The logged in administrator does not have permissions to run SmartEvent
- B. The SmartEvent core on the Solr mdexer has been deleted
- C. Postgres database ts down
- D. Cpd daemon is unable to connect to the log server
Answer: B
NEW QUESTION 59
John works for ABC Corporation.They have enabled CoreXL on their firewall John would like to identify the cores on which the SND runs and the cores on which the firewall instance is running. Which command should John run to view the CPU role allocation?
- A. fw ctl affinity -I
- B. fw ctl cores
- C. fw ctl affinity -v
- D. fwaccel stat -I
Answer: A
NEW QUESTION 60
Check Point Threat Prevention policies can contain multiple policy layers and each layer consists of its own Rule Base Which Threat Prevention daemon is used for Anti-virus?
- A. in emaild
- B. ctasd
- C. in.msd
- D. in.emaild.mta
Answer: A
NEW QUESTION 61
Vanessa is reviewing ike.elg file to troubleshoot failed site-to-site VPN connection After sending Mam Mode Packet 5 the response from the peer is PAYLOAD-MALFORMED" What is the reason for failed VPN connection?
- A. The authentication on Quick Mode is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 3 and 4 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key - B. The authentication on Phase 1 is causing the problem.
Pre-shared key on local gateway encrypted by the hash algorithm created in Packet 3 and Packet 4 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key - C. The authentication on Phase 2 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 1 and 2 doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key - D. The authentication on Phase 1 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm doesn't match with the hash on the peer gateway generated by encrypting its pre-shared key created in Packet 1 and Packet 2
Answer: C
NEW QUESTION 62
You have configured IPS Bypass Under Load function with additional kernel parameters ids_tolerance_no_stress=15 and ids_tolerance_stress-15 For configuration you used the *fw ctl set' command After reboot you noticed that these parameters returned to their default values What do you need to do to make this configuration work immediately and stay permanent?
- A. Edit appropriate parameters in $FWDIR/boot/modules/fwkern.conf
- B. Set these parameters again with "fw ctl set" and edit appropriate parameters in $FWDIR/boot/modules/ fwkern.conf
- C. Set these parameters again with "fw ctl set" and save configuration with "save config"
- D. Use script $FWDIR/bin IpsSetBypass.sh to set these parameters
Answer: B
Explanation:
Explanation
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=
NEW QUESTION 63
Some users from your organization have been reporting some connection problems with CIFS since this morning You suspect an IPS issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS chain module (position 4 in the chain) to check If the packets pass the IPS. What command do you need to run?
- A. tcpdump -eni any <filterexpression>
- B. fw monitor -pi asm <filtefexpfession>
- C. fw monitor -pi 5 -e <filterexptession>
- D. fw monitor -ml -pi 5 -e <filterexperession>
Answer: A
NEW QUESTION 64
VPN issues may result from misconfiguration, communication failure, or incompatible default configurations between peers Which basic command syntax needs to be used fortroubleshootingSite-to-Site VPN Issues?
- A. vpn debug truncon
- B. vpn truncon debug
- C. cp debug truncon
- D. fw debug truncon
Answer: B
NEW QUESTION 65
What is the function of the Core Dump Manager utility?
- A. To limit the number of core dump files per process as well as the total amount of disk space used by core files
- B. To determine which process is slowing down the system
- C. To send crash information to an external analyzer
- D. To generate a new core dump for analysis
Answer: A
NEW QUESTION 66
Which command can be run in Expert mode lo verify the core dump settings?
- A. grep SFWDlR/config/db/initial
- B. cat /etc/sysconfig/coredump/cdm conf
- C. grep cdm /config/db/coredump
- D. grep cdm /config/db/initial
Answer: A
NEW QUESTION 67
......
Valid Way To Pass CheckPoint's 156-585 Exam with : https://www.validvce.com/156-585-exam-collection.html
Free Test Engine For Check Point Certified Troubleshooting Expert Certification Exams: https://drive.google.com/open?id=1GT_gnL3ZXjUHltcUMdBBCxMnq9nYG0wr
