Updated May 16, 2024 Certification Exam 350-501 Dumps - Practice Test Questions
Updated Verified 350-501 dumps Q&As - Pass Guarantee or Full Refund
Cisco 350-501 certification exam focuses on validating one’s skills and knowledge in service provider core networking technologies. Aspiring professionals in network operations and support can utilize this certification to prove their expertise in implementing and operating core service provider network technologies, which ultimately leads to greater professional advancement.
Cisco 350-501 exam is ideal for professionals who want to enhance their knowledge and skills in service provider network technologies. Implementing and Operating Cisco Service Provider Network Core Technologies certification can help individuals enhance their career prospects and open up new opportunities in the service provider industry.
Cisco 350-501 exam is an online-based test that includes multiple-choice questions, simulations, and drag-and-drop exercises. 350-501 exam is 120 minutes long, and the passing score is 825 out of 1000. 350-501 exam fee is $400, and the registration process can be done through the Pearson VUE website.
NEW QUESTION # 146
Refer to the exhibit:
Based on the show/ command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- C. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: C
NEW QUESTION # 147
Refer to the exhibit.
An engineer configured BGP summarization on a customer's network. Which route is advertised to BGP peers?
- A. 192.168.1.0/24
- B. 192.0.0.0/16
- C. 192.168.0.0/16
- D. 192168.0.5/30
Answer: C
NEW QUESTION # 148
Refer to the exhibit. Based on the show command output, which result m true after BGP session is established?
- A. The IOS XR router advertises and accepts all routes to and from eBGP neighbor 192.168.2.2
- B. The IOS XR router does not advertise any routes to the neighbor 192.168.2.2,but it accepts all routes from 192.168.2.2.
- C. No routes are accepted from the neighbor 192.168.2.2, nor are any routes advertised to it
- D. The IOS XR router advertises all routes to the neighbor 192.168.2.2, but it does not accept any routes from 192.168.2.2
Answer: C
NEW QUESTION # 149
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network.
Which configuration must the engineer apply on the router to accomplish this task?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 150
Refer to the exhibit:
Which information is provided for traceback analysis when this configuration is applied?
- A. BGP version
- B. source interface
- C. packet size distribution
- D. IP sub flow cache
Answer: A
NEW QUESTION # 151
Which configuration modifies Local Packet Transport Services hardware policies?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/addr_serv/command/reference/b_ipaddr_cr41crs/b_ipaddr_cr41crs_chapter_0111.html#wp1754734006
NEW QUESTION # 152
What is the role of NFVI?
- A. network address translation
- B. monitor
- C. domain name service
- D. intrusion detection
Answer: B
NEW QUESTION # 153
Refer to the exhibit.
The network engineer is performing end-to-end MPLS path testing with these conditions:
* Users must perform MPLS OAM for all available same-cost paths from R1 to R4.
* Traceroute operations must return all of the next-hop IP details.
Which configuration meets these requirements?
- A. traceroute mpls multipath ipv4 10.10.10.4 255.255.255.255
- B. traceroute mpls ipv4 10.10.10.4 255.255.255.255 verbose
- C. traceroute mpls multipath ipv4 10.10.10.4 255.255.255.255 verbose
- D. traceroute mpls ipv4 10.10.10.4 255.255.255.255 source 10.10.10.1
Answer: A
NEW QUESTION # 154
A network engineer deployed Cisco MPLS TE tunnels on the service provider network to steer the traffic over those tunnels to optimize the bandwidth utilization.
Which two configurations can send the traffic to the Cisco MPLS TE tunnel interfaces? (Choose two.)
- A. applying the autoroute announce command under the Cisco MPLS TE interface tunnel
- B. applying an explicit-path command under the Cisco MPLS TE interface tunnel
- C. applying the fast-reroute per-prefix command
- D. static route pointing down to the Cisco MPLS TE interface tunnel
- E. enabling LFA calculation
Answer: A,B
NEW QUESTION # 155
Refer to the exhibit. A network operator working for service provider with an employee id 3715
15:021 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
- A. Configure the both keyword to enable LDP globally
- B. Enable MPLS LDP on the interface
- C. Delete the static router ID
- D. Disable Cisco Express Forwarding globally
Answer: B
NEW QUESTION # 156
An engineer working for a private service provider with employee id: 3994 37 650 is configuring a Cisco device to redistribute OSPF into BGP. Which task enables the device to filter routes?
- A. Configure a prefix list and associate it to the BGP peer interface
- B. Configure an access list and reference it with the redistribute command
- C. Configure a route map and reference it with the redistribute command
- D. Configure a distribute list and associate it to the BGP peer interface
Answer: C
NEW QUESTION # 157
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: D
NEW QUESTION # 158
Refer to the exhibit.
An engineer is implementing Auto-RP and reviewing the configuration of the PE-A.
Which configuration permits Auto-RP messages to be forwarded over this interface?
- A. PE-A(config-if)#ip pim sparse-mode
- B. PE-A(config-if)#ip pim sparse-dense-mode
- C. PE-A(config-if)#no ip pim bsr-border
- D. PE-A(config-if)#ip igmp version 3
Answer: B
NEW QUESTION # 159
Refer to the exhibit. A network engineer is deploying SNMP configuration on client's routers.
Encrypted authentication must be included on router 1 to provide security and protect message confidentially.
Which action should the engineer perform on the routers to accomplish this task?
- A. snmp-server user testuser group 1 remote 192.168.0.254 v3 auth md5 testpassword
- B. snmp-server community public
- C. snmp-server group group 1 v3 auth.
- D. snmp-server host 192.168.0.254 informs version 3 auth testuser config.
Answer: A
NEW QUESTION # 160
Refer to the exhibit.
Refer to the exhibit. ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer's IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefixlist AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop local-address
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - B. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community local-as additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - C. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-export additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - D. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY
Answer: C
NEW QUESTION # 161
After troubleshooting multiple outages on the network due to repeated configuration errors, the network architect asked an engineer to enable NETCONF to facilitate future configurations. The configuration must enable syslog messaging to record NETCONF notifications from each of the numerous devices on the network. Which configuration must the engineer apply?
- A. netconf-yang username ciscotesttaker privilege 15 password 0 ciscotest snmp-server community ciscotest RW netconf-yang cisco-ia snmp-community-string ciscotest logging history informational
- B. netconf-yang username ciscotesttaker privilege 15 password 0 ciscotest aaa new-model aaa authorization exec default local snmp-server community ciscotest RW netconf-yang cisco-ia snmp- community-string ciscotest logging history debugging
- C. username cisco test taker privilege 15 password 0 ciscotest aaa new-model aaa authorization exec default local snmp-server community ciscotest RW netconf-yang cisco logging history critical
- D. username cisco test taker privilege 15 password 0 cisco test aaa new-model aaa authorization exec default local snmp-server community cisco test RW netconf-yang cisco-ia snmp-community- string ciscotest logging history warnings
Answer: B
NEW QUESTION # 162
Refer to the exhibit. What does the REST API command do?
- A. It removes the information identified by Descriptions.xml.
- B. It displays the information identified by Descriptions.xml.
- C. It executes the commands specified in Oescriptioos.xml.
- D. It retrieves the information requested by Descriptions.xml.
Answer: C
NEW QUESTION # 163
After you analyze your network environment, you decide to implement a full separation model for Internet access and MPLS L3VPN services For which reason do you make this decision?
- A. It enables EGP and IGP to operate independently
- B. It requires only one edge router
- C. It enables you to choose whether to separate or centralize each individual service.
- D. It is easier to manage a system in which services are mixed
Answer: A
NEW QUESTION # 164
ASN 65001 is peering with ASN 65002 to exchange IPv6 BGP routes. All routes that originate in ASN 65001 have a standard community value of 65001:100, and ASN 65002 is allowed to advertise only 2001
:db8:aaaa::/48. An engineer needs to update the ASN 65001 route-filtering configuration to meet these conditions:
* Looped routes into ASN 65001 and routes that have traversed 10 or more ASNs must be denied.
* Routes accepted into ASN 65001 must be assigned a community value of 65001:200.
Which configuration must the engineer apply to the ASN 65001 border router?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
- E. Option E
Answer: B
NEW QUESTION # 165
......
Exam Engine for 350-501 Exam Free Demo & 365 Day Updates: https://www.validvce.com/350-501-exam-collection.html
350-501 PDF Questions and Testing Engine With 451 Questions: https://drive.google.com/open?id=1OFQl5hnXxq1q0KuxWN3Rilmc2qSOx_mN
