Use C1000-058 Exam Dumps (2025 PDF Dumps) To Have Reliable C1000-058 Test Engine
C1000-058 PDF Recently Updated Questions Dumps to Improve Exam Score
NEW QUESTION # 105
In IBM MQ, what does a Sender Channel do?
- A. Monitors incoming messages
- B. Transfers messages to another queue manager
- C. Listens for connections from clients
- D. Receives messages from applications
Answer: B
NEW QUESTION # 106
Which statement describes an MQl channel?
- A. A unidirectional communications link that connects an application to a queue manager.
- B. A bidirectional communications link that connects an application to a queue manager.
- C. A unidirectional communications link between two queue managers.
- D. A bidirectional communications link between two queue managers.
Answer: B
NEW QUESTION # 107
For MQ Appliance, which command can be used to set values in the mqat.ini?
- A. setmqenv
- B. setmqat
- C. setmqini
- D. setmqaut
Answer: C
NEW QUESTION # 108
What command line tool is used to manage queue manager objects?
Response:
- A. mqm
- B. mqm.sh
- C. mqexplorer.exe
- D. runmqsc
Answer: D
NEW QUESTION # 109
An application is putting messages in an MQ cluster but the messages are only routed to the local queue manager to which the application is connected.
What parameter should the administrator adjust to achieve a desired round-robin delivery f messages throughout the cluster?
- A. MSGDLVSQ should be set to ANY
- B. MSGDLVSQ should be set to SHARE
- C. CLWLUSEQ should be set to SHARE
- D. CLWLUSEQ should be set to ANY
Answer: D
NEW QUESTION # 110
The behavior of the automatic client reconnection functionally provided by the IBM MQ classes for JMS depends on the properties being set for client reconnection.
What is one of the properties that needs to be set?
- A. CCT
- B. MULTI
- C. TRAN
- D. TTP
Answer: C
NEW QUESTION # 111
What does the term "Social Engineering" refer to in cybersecurity?
- A. Unauthorized access to social media accounts
- B. Encrypting social media data
- C. Controlling social network bandwidth
- D. Manipulating individuals to divulge confidential information
Answer: D
NEW QUESTION # 112
Which attribute is used to specify the maximum size of messages that can be put on a queue in IBM MQ?
- A. MaxMsgLength
- B. MaxSize
- C. MsgSizeLimit
- D. MaxDepth
Answer: A
NEW QUESTION # 113
For MQ Advanced for distributed platforms, which two components are included?
(Select two.)
Response:
- A. Managed File Transfer
- B. Advanced Message Security
- C. IBM MQ Internet Pass-Thru
- D. MessageSight
- E. MQ Appliance
Answer: A,B
NEW QUESTION # 114
The following commands are issued on QMGRA:
DEFINE QLOCAL(SATURN)
DEFINE QLOCAL(QMGRB) USAGE(XMITQ)
DEFINE QALIAS(MARS) TARGET (VENUS)
DEFINE QALIAS(PLUTO) TARGET(SATURN)
DEFINE QREMOTE(VENUS) RNAME(SATURN) RQMNAME(QMGRB)
The following commands are issued on QMGRB:
DEFINE QLOCAL (mars)
DEFINE QLOCAL(QMGRA) USAGE(XMITQ)
DEFINE QALIAS(SATURN) TARGET(VENUS)
DEFINE QALIAS(PLUTO) TARGET(VENUS)
DEFINE QREMOTE(VENUS) RNAME(PLUTO) RQMNAME(QMGRA)
Where does the message go when it is put to MARS on QMGRA?
- A. MARS on QMGRB
- B. SATURN on QMGRA
- C. MARS on QMGRA
- D. SATURN on QMGRB
Answer: B
NEW QUESTION # 115
What is the role of a "Post-Mortem" or "Lessons Learned" meeting after a significant system issue?
- A. Documenting user complaints
- B. Analyzing system log files
- C. Conducting network performance tests
- D. Reviewing the incident, identifying causes, and discussing preventive measures
Answer: D
NEW QUESTION # 116
There is an environment where all cluster-sender channels are automatically associated with a separate cluster transmission queue.
What command would an administrator run to have all cluster-sender channels associated with the single default cluster transmit queue?
- A. ALTER QMGR CLUSTERQ("SYSTEM.CLUSTER.TRANSMIT.QUEUE")
- B. ALTER QMGR DEFCLXQ(CHANNEL)
- C. ALTER QMGR DEFCLXQ(SCTQ)
- D. ALTER QMGR DEFCLXQ("SYSTEM.CLUSTER.TRANSMIT.QUEUE")
Answer: C
NEW QUESTION # 117
What mechanism does IBM MQ use for securing data while in transit?
- A. HMAC Authentication
- B. AES Encryption
- C. SSL/TLS
- D. RSA Key Exchange
Answer: C
NEW QUESTION # 118
What is the purpose of the -s secretText parameter used in the prepareha and crthagrp What is the purpose of the -s secretText parameter used in the prepareha and crthagrp commands on MQ Appliance?commands on MQ Appliance?
- A. To generate a short-lived password used to set up on unique key for the appliances.
- B. To be used to decide. In secret, which appliance will be the preferred appliance.
- C. To generate a short-lived password used to create two keys, one for each appliance.
- D. To be used as the unique key for the appliances.
Answer: D
NEW QUESTION # 119
What is the primary goal of Memory Ballooning in virtualized environments for performance tuning?
- A. Dynamically adjusting memory allocation for virtual machines
- B. Increasing CPU usage
- C. Enhancing disk I/O
- D. Reducing memory utilization
Answer: A
NEW QUESTION # 120
Which statement is true regarding a floating IP address that can be attached to a QMGR when using RDQM?
- A. Can be a part of a different subnet if the nodes cross data centers
- B. Must be part of the same subnet as any one node
- C. Must be a part of the same subnet as all nodes
- D. Must be a part of different subnet
Answer: C
NEW QUESTION # 121
An administrator has been asked to make changes to MQ config so that the MQ client application APP_A connecting to queue manager QM1 can reconnect automatically without re-starting the applications.
What does the administrator need to configure to achieve this?
- A. Configure AutoConnect attribute of CHANNELS stanza in mqclient.ini
- B. Alter QMGR and set the attribute RECONN(YES)
- C. Configure DefRecon attribute of CHANNELS stanza in mqclient.ini
- D. Alter SVRCONN channel and set attribute AUTOCONN(TRUE)
Answer: C
NEW QUESTION # 122
There is an environment where all cluster-sender channels are automatically associated with a separate cluster transmission queue. What command would an administrator run to have all cluster-sender channels associated with the single default cluster transmit queue?
Response:
- A. ALTER QMGR DEFCLXQ(CHANNEL)
- B. ALTER QMGR DEFCLXQ(SCTQ)
- C. ALTER QMGR DEFCLXQ("SYSTEM.CLUSTER.TRANSMIT.QUEUE")
- D. ALTER QMGR CLUSTERQ("SYSTEM.CLUSTER.TRANSMIT.QUEUE")
Answer: D
NEW QUESTION # 123
CONNAUTH is enabled on a queue manager with ADOPTCTX set to YES.
Which two actions does CONNAUTH handle when an application connects to MQ using client bindings?
- A. CONNAUTH checks object authorization
- B. CONNAUTH adopts the context of the user
- C. CONNAUTH authenticates the user
- D. CONNAUTH calls the defined security exit
- E. CONNAUTH confirms that the user is not blocked
Answer: B,C
NEW QUESTION # 124
A channel is occasionally slow in sending messages.
Which channel statistics would be most useful in identifying whether a user exit configured on the channel is responsible for the delay?
- A. ExitTimeAvg and NetTimeAvg
- B. ExitTimeMax and PurgeCount
- C. ExitTimeMin and MsgCount
- D. ExitTimeAvg and ExitTimeMax
Answer: D
NEW QUESTION # 125
What command line tool is used to manage queue manager objects?
- A. mqm
- B. mqm.sh
- C. mqexplorer.exe
- D. runmqsc
Answer: D
NEW QUESTION # 126
What is the purpose of a Proof of Concept (PoC) in IT planning?
- A. Implementing a full-scale project deployment
- B. Developing end-user training materials
- C. Demonstrating the technical viability of a proposed solution
- D. Finalizing project budgets
Answer: C
NEW QUESTION # 127
Which statement is true regarding a floating IP address that can be attached to a QMGR when using RDQM?
Response:
- A. Can be a part of a different subnet if the nodes cross data centers
- B. Must be part of the same subnet as any one node
- C. Must be a part of the same subnet as all nodes
- D. Must be a part of different subnet
Answer: C
NEW QUESTION # 128
Which statement is true regarding the use of CHLAUTH rules?
- A. They can be used to set an MCAUSER value for any channel asserting a specific user ID
- B. They can be used to set an MQ service that overrides firewall policy on inbound channels
- C. They can be used to configure the TLS distinguished name within the queue manager personal certificate.
- D. They can be used to auto-define cluster sender channels for inbound channels to the full repository
Answer: A
NEW QUESTION # 129
......
C1000-058 Dumps Full Questions with Free PDF Questions to Pass: https://www.validvce.com/C1000-058-exam-collection.html
Free IBM Certified System Administrator C1000-058 Official Cert Guide PDF Download: https://drive.google.com/open?id=1nEYbhLvCMifRxng-9C4uvKsPvBIhcNpp
