2022 NS0-183 dumps review - Professional Quiz Study Materials
NS0-183 Test Prep Training Practice Exam Questions Practice Tests
NetApp NS0-183 Exam Topics:
| Section | Objectives |
|---|---|
| ONTAP Switches | - Identify the functions of supported switches - Demonstrate knowledge of how to configure/verify configuration requirements |
| Basic Installation Topics and Tools | - Describe installation preparation steps - Describe basic equipment installation steps |
| ONTAP Networking | - Describe the cluster network, e.g., multi-node, single node clusters - Demonstrate knowledge of the purpose of the management network - Identify the networking components in a cluster environment |
NetApp NS0-183 Exam Certification Details:
| Exam Code | NS0-183 NCSIE |
| Passing Score | 67% |
| Recommended Training | ONTAP Clustered Installation Workshop (ILT) ONTAP Cluster Administration (vILT/ILT) Universal FAS Installation (WBT) Introduction to NetApp Installation Standard (WBT) |
| Exam Price | $150 USD |
| Number of Questions | 60 |
NEW QUESTION 27
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. cluster ha show
- B. clustering ring show
- C. cluster image show
- D. cluster show
Answer: D
NEW QUESTION 28
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Move the SAS cables to a new stack.
- B. Disable out-of-band ACP.
- C. Enable in-band ACP.
- D. Remove the Ethernet cables.
Answer: C,D
NEW QUESTION 29
You have an AFF All SAN Array (ASA) cluster that is running ONTAP 9.7. The cluster is configured for Active Directory domain controller access using a domain tunnel.
In this scenario, which two licenses are enabled on the cluster? (Choose two.)
- A. NVMe
- B. iSCSI
- C. CIFS
- D. FCP
Answer: C,D
NEW QUESTION 30
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A. Port a0a of node cluster1-01 is down.
- B. The ports of cluster1-02 are missing in the broadcast domain.
- C. The LIF has to be configured with a failover group.
- D. The broadcast-domain MTU needs to be either 1500 or 9000.
Answer: D
NEW QUESTION 31
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. You can change any drives or disk shelves as part of this replacement procedure.
- B. The boot device must remain intact and must not be removed from the impaired node.
- C. You must move the boot device from the impaired node to the replacement node.
- D. A controller model of the same type must be used to replace the impaired node.
Answer: C,D
Explanation:
Explanation/Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1147156 (2)
NEW QUESTION 32
You are adding new controllers to an existing cluster. As part of the upgrade process, you have updated the BES-53248 cluster switches.
In this scenario. Which two commands would you use to verify a healthy cluster after the upgrade? (Choose two.)
- A. network interface show -vserver Cluster -fields auto-revert
- B. network interface show -vserver Cluster
- C. network device-discovery show -protocol cdp
- D. network port show -ipspace Cluster
Answer: B,D
NEW QUESTION 33
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Move the SAS cables to a new stack.
- C. Remove the Ethernet cables.
- D. Enable in-band ACP.
Answer: A,B
Explanation:
Explanation/Reference:
NEW QUESTION 34
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Install 10 meter NetApp supported copper cables.
- B. Change the requirement for Ethernet cables.
- C. Change the requirement for optical cables.
- D. Relocate the switches or the AFF A400 so that the distance is less than five meters.
Answer: C,D
NEW QUESTION 35
When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)
- A. Open a support case to prepare for the installation.
- B. Search for Technical Support bulletins for the hardware.
- C. Complete a Service Event Report.
- D. Review the hardware components in Hardware Universe.
- E. Use Config Builder to create a configuration spreadsheet.
Answer: C,D,E
NEW QUESTION 36
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlexClone volumes
- B. thin provisioning
- C. FlashCache
- D. Flash Pool
Answer: C,D
NEW QUESTION 37
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
- B. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
- C. The assigned port for the intercluster e1c LIF is in the down admin state.
- D. The LIF that was created has the wrong role type.
Answer: D
NEW QUESTION 38
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be added to clusters that have existing SAN licenses.
- B. ASA controllers can only be installed as a standalone HA pair.
- C. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- D. Add the ASA controllers to an existing 10-node cluster.
Answer: B
Explanation:
https://docs.netapp.com/allsan/index.jsp?topic=%2Fcom.netapp.doc.dot-asa-config%2FGUID-C0C9B6EF-1AA7-429E-BB84-AC5F9E16D088.html
NEW QUESTION 39
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure a remote tier.
- B. Configure protocols.
- C. Configure aggregates.
- D. Configure cluster LIFs.
Answer: C
NEW QUESTION 40
You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?
- A. 0/1 and 0/2
- B. 1/31 and 1/32
- C. 1/21 to 1/24
- D. 0/13 to 0/16
Answer: B
NEW QUESTION 41
You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)
- A. Use a USB drive with the new software image and let ONTAP automatically boot.
- B. Use ONTAP System Manager to download and install the new software image.
- C. Use ONTAP System Manager to upload and install the new software image.
- D. Use the cluster image package get and cluster image update commands.
Answer: B,D
NEW QUESTION 42
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Disable out-of-band ACP.
- B. Move the SAS cables to a new stack.
- C. Remove the Ethernet cables.
- D. Enable in-band ACP.
Answer: A,B
NEW QUESTION 43
After completing a technology refresh, you need to schedule a knowledge transfer with a customer. The customer asks you to address a number of topics during the meeting.
In this scenario, which two topics would be appropriate to address? (Choose two.)
- A. performing database application data migrations
- B. registering for access to the NetApp Support site
- C. logging the customer support calls
- D. accessing internal NetApp KB articles
Answer: B,D
NEW QUESTION 44
......
Exam Questions Answers Braindumps NS0-183 Exam Dumps PDF Questions: https://www.validvce.com/NS0-183-exam-collection.html
