[Jul-2021] Verified Network Appliance Exam Dumps with NS0-183 Exam Study Guide
Best Quality Network Appliance NS0-183 Exam Questions ValidVCE Realistic Practice Exams [2021]
NEW QUESTION 33
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. IPspaces
- B. broadcast domains
- C. BGP
- D. routing
Answer: B
Explanation:
Explanation/Reference: https://www.netapp.com/media/16885-tr-4182.pdf (9)
NEW QUESTION 34
You installed a new AFF A800 2-node ONTAP 9.5 cluster and are asked to run diagnostics to validate the hardware.
Which command is used from the loader prompt to enter diagnostics?
- A. savenv
- B. boot_diags
- C. printenv
- D. sldiag
Answer: B
NEW QUESTION 35
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?
- A. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
- B. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.
- C. Assign all data LIFs to Node 1.
- D. Perform a takeover of Node 2 to ensure that it does not run.
Answer: C
NEW QUESTION 36
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster?
(Choose two.)
- A. FlexClone volumes
- B. FlashCache
- C. thin provisioning
- D. Flash Pool
Answer: B,D
NEW QUESTION 37
You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?
- A. A site license is required.
- B. No license is required.
- C. A subscription license is required.
- D. A capacity license is required.
Answer: D
NEW QUESTION 38
Which NetApp tool relies on PowerShell to produce a comprehensive handover report to the customer?
- A. Fusion
- B. NetAppDocs
- C. Config Advisor
- D. Active IQ
Answer: B
NEW QUESTION 39
You were asked to install a FAS9000 with two quad-port SAS PCI cards. The SAS PCI cards are installed in slot 9 and slot 1. In preparation for the installation, you are filling out the SAS cabling worksheet. In this scenario, which ports are used for the second stack?
- A. 9a/1a
- B. 9c/1a
- C. 9b/1b
- D. 9a/1d
Answer: D
NEW QUESTION 40
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. mixed-mode
- B. multipath HA
- C. quadpath HA
- D. single path
Answer: A,B
NEW QUESTION 41
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node2:e4a and node2:e8a.
- B. Swap node1:e4a and node2:e4b.
- C. Swap node1:e4a and node1:e8a.
- D. Swap node1:e8a and node2:e4a.
Answer: A
NEW QUESTION 42
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. IPspaces
- B. broadcast domains
- C. BGP
- D. routing
Answer: B
NEW QUESTION 43
You finished a new installation and executed Config Advisor successfully. You review the physical racking and cabling on one of the controllers, and notice an amber light that was not previously on.
Which two actions should you perform before you turn over the cluster for production? (Choose two.)
- A. Review AutoSupport messages which could explain the controller state.
- B. Let the customer know the cluster is operating normally while the amber LED is on.
- C. Execute Config Advisor again to check for new errors.
- D. Remove cables connected to the controller until you find the one responsible for the controller issue.
Answer: A,C
NEW QUESTION 44
You are preparing for a new installation. While determining the most suitable version of ONTAP software to deploy, you want to verify the ONTAP 9 release cadence to ensure that you are deploying a Long Term Service (LTS) release.
In this scenario, where would you find this information?
- A. Visit the Hardware Universe site.
- B. Visit the NetApp Support site.
- C. Visit the ONTAP 9 Documentation Center site.
- D. Visit the Interoperability Matrix Tool site.
Answer: C
NEW QUESTION 45
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. Active IQ OneCollect
- B. Inventory Collect Tool
- C. SnapGathers
- D. NetAppDocs
Answer: D
NEW QUESTION 46
Which statement regarding a node-management LIF is true?
- A. The LIF can be set only on the built-in node-management port - e0M.
- B. The LIF can be set up on a dedicated VLAN in the cluster network.
- C. The LIF can be set up on a dedicated VLAN in the data network.
- D. The LIF must use two switches for redundancy purposes.
Answer: C
NEW QUESTION 47
A customer wants to expand a 10-node AFF A700s NAS cluster running with Cisco Nexus 3132Q-V cluster interconnect switches using new nodes.
In this scenario, what is the maximum number of nodes to be added into this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 48
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. master
- B. term-based
- C. perpetual
- D. base
Answer: B,C
NEW QUESTION 49
After an initial setup, you want to create a new data aggregate. The node has thirty-one 4 TB SATA spare disks assigned. Your customer wants to have two spare disks.
In this scenario, which two settings would you use to reach the maximum capacity and availability? (Choose two.)
- A. -raidtype raid_dp
- B. -maxraidsize 31
- C. -raidtype raid_tec
- D. -maxraidsize 29
Answer: C,D
NEW QUESTION 50
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- B. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- C. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- D. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
Answer: C
NEW QUESTION 51
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer's site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?
- A. Cisco best practices require four Cisco 3232C switches for high availability.
- B. A 4-node AFF A300 cluster requires four Cisco 3232C switches.
- C. Your customer ordered a MetroCluster IP configuration.
- D. A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
Answer: C
NEW QUESTION 52
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM data LIF
- B. node management LIF
- C. intercluster LIF
- D. SVM management LIF
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 53
Which type of partitioning would you use when installing a FAS8200 with 24 SAS drives running ONTAP 9.5?
- A. root-root-data-data partitioning
- B. root-data-data partitioning
- C. root-root-data partitioning
- D. root-data partitioning
Answer: D
NEW QUESTION 54
You are installing a new 2-node AFF A220 cluster running ONTAP 9.5. The customer would like to use the UTA2 adapters from the first controller to connect to the 10GbE front-end switches. On the second controller, they would like to use the first UTA2 port as a target FC port, and the second as an FC initiator. In this scenario, according to NetApp Best practices, what should your customer do?
- A. Change the UTA2 ports from CNA mode to FC mode on the first controller.
- B. Change all the UTA2 ports from CNA mode to FC mode.
- C. Change all the UTA2 ports to CNA to support both FC and Ethernet.
- D. Change the first two ports of each controller to FC and the last two to CNA.
Answer: D
NEW QUESTION 55
You use the system health subsystem show command to troubleshoot your newly installed ONTAP cluster.
In this scenario, which two health outputs would this command show you? (Choose two.)
- A. shelf connectivity
- B. cluster switch cabling
- C. data switch cabling
- D. node CPU utilization
Answer: A,D
NEW QUESTION 56
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to white-list the two nodes on their mail server.
- B. The customer needs to change the transport protocol to HTTP.
- C. The customer needs to exclude the two nodes from the attachment-size limitation.
- D. The customer needs to enable AutoSupport for both nodes.
Answer: A,D
NEW QUESTION 57
......
Authentic Best resources for NS0-183: https://www.validvce.com/NS0-183-exam-collection.html
