Best Way To Study For NACE NACE-CIP2-001 Exam Brilliant NACE-CIP2-001 Exam Questions PDF
Updated Verified Pass NACE-CIP2-001 Exam - Real Questions & Answers
NEW QUESTION 28
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. True
- B. False
Answer: A
NEW QUESTION 29
You should bulk store coatings containing isocyanates
- A. in a refrigerated warehouses
- B. in a well ventilated area separate from the work place.
- C. in a heated warehouse.
- D. wherever it is convenient
Answer: B
NEW QUESTION 30
Surface preparation methods for Non-ferrous metals are:
- A. The same for all Non-FetT0us metals
- B. Specific for each type of Non-ferrous metal
- C. Not required
- D. The same as for Ferrous metals
Answer: B
NEW QUESTION 31
When NACE/SSPC WJ 1 is referenced; what type of equipment would the Inspector expect to see on the job:
- A. Abrasive Blasting Equipment
- B. Scarifiers
- C. Power Tools
- D. Water Jetting Equipment
Answer: D
NEW QUESTION 32
You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified.
This is not a good choice because:
- A. The floating structure is stationary
- B. It will result in a very slippery surface
- C. It doesn't contain biocide
- D. It contains biocide
Answer: D
NEW QUESTION 33
Inspection and Test plans are developed by referencing:
- A. The Specification, Application Guidelines, 'Relevant Standards and Codes
- B. The Specification, Safety Manual, Relevant Standards and Codes
- C. The Specification, TDS, relevant Standards and Codes
- D. The Specification, SDS, relevant Standards and Codes
Answer: C
NEW QUESTION 34
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- B. Correct the errors yourself and submit the reports without any further action
- C. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
- D. Correct the errors yourself and suggest the Level 1 inspector be replaced
Answer: A
NEW QUESTION 35
Coating Surveys are legally required:
- A. On high pressure gas lines and fireproofed structures
- B. On water tanks and potable water pipelines
- C. On commercial marine vessels and offshore platforms
- D. On food and beverage vessels and can linings
Answer: C
NEW QUESTION 36
An Inspection and Test Plan is required when:
- A. It is always required
- B. When the Inspector requests one
- C. When the Coating Applicator requests one
- D. When the Owner specifies one
Answer: A
NEW QUESTION 37
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that another NACE Inspector would understand
- B. Language that only in the project would understand
- C. Language that only technical experts would understand
- D. Language that the most would understand
Answer: D
NEW QUESTION 38
Galvanizing performs best in which of the following exposures:
- A. pH of 13
- B. pH below 4
- C. pH between 5-10
- D. pH above 12
Answer: C
NEW QUESTION 39
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. Sacking
- C. High-pressure water washing
- D. Stoning
Answer: B
NEW QUESTION 40
Pre-cleaning of work pieces will NOT remove
- A. mill scale.
- B. snow, ice or water.
- C. dirt.
- D. oil or grease.
Answer: A
NEW QUESTION 41
When ASIN D 3363 is specified the Inspector must:
- A. Record the percentage of failure
- B. Record the two end points identified in the standard
- C. Use the correct solvent
- D. Record the highest value attained
Answer: B
NEW QUESTION 42
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. inorganic zincs.
- B. powder coatings.
- C. urethanes.
- D. epoxies.
Answer: A
NEW QUESTION 43
......
Updated PDF (New 2021) Actual NACE NACE-CIP2-001 Exam Questions: https://www.validvce.com/NACE-CIP2-001-exam-collection.html
Dumps Moneyack Guarantee - NACE-CIP2-001 Dumps Approved Dumps: https://drive.google.com/open?id=1ihULG4o01XP66ChsswlzalumntD58I5p
