May-2024 Realistic JN0-104 Exam Dumps with Accurate & Updated Questions
JN0-104 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION # 71
Which two commands is used to validate the syntax of a configuration without applying the configuration?
- A. commit synchronize
- B. commit confirmed
- C. commit and-quit
- D. commit check
Answer: B,D
NEW QUESTION # 72
What are two configurable physical interface properties? (Choose two.)
- A. MTU
- B. address
- C. protocol family
- D. link mode
Answer: A,D
NEW QUESTION # 73
At which hierarchy would you configure a static MAC address for interface ge-0/0/0?
- A. [edit interfaces ge-0/0/0 unit 0 family inet]
- B. [edit interfaces ge-0/0/0 unit 0 family inet address 172.25.11.2/24]
- C. [edit interfaces ge-0/0/0 unit 0]
- D. [edit interfaces ge-0/0/0]
Answer: B
NEW QUESTION # 74
Which application would be suited for UDP traffic?
- A. Web browsing
- B. on-line shopping
- C. streaming television shows
- D. downloading a program
Answer: C
NEW QUESTION # 75
You must segment your internal /24 network into a minimum of 12 subnets, each containing a minimum of 12 hosts.
Which network mask do you use?
- A. /28
- B. /29
- C. /27
- D. /26
Answer: A
NEW QUESTION # 76
Referring to the exhibit.
which action would synchronize a new router's clock with the NTP Server?
Or
Which action would synchronize the local router's clock with the NTP server?
- A. Issue the set date ntp operational
- B. Configure the correct NTP trusted kay using the set trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
- C. Configure the NTP server using the set server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
- D. Reboot the router.
Answer: A
NEW QUESTION # 77
You have received a request from the user, SecurityTeam, to notify their terminal connection only when someone commits a change to the configuration of a specific networking device. Which command would you input in this scenario?
- A. set system syslog user SecurityTeam change-log any
- B. set system syslog user SecurityTeam interactive-commands
- C. set system syslog user SecurityTeam change-log alert
- D. set system syslog user SecurityTeam interactive-commands any
Answer: A
NEW QUESTION # 78
Which CLI mode allows you to make configuration changes?
- A. enable mode
- B. operational mode
- C. shell mode
- D. configuration mode
Answer: D
NEW QUESTION # 79
Which of these are true about the primary address of an interface? (Choose two)
- A. It is the address used by default as the local address for broadcast and multicast packets sourced locally and sent out of the interface
- B. The primary address is used when you have multiple IP addresses belonging to the same subnet on the same interface.
- C. It can be useful for selecting the local address used for packets sent out of unnumbered interfaces when multiple non-127 addresses are configured on the loopback interface.
- D. By default, the primary address on an interface is selected as the numerically highest local address configured on the interface.
Answer: A,C
NEW QUESTION # 80
Which of these about routing tables are true? (Choose two)
- A. Routing table is populated from the forwarding table.
- B. Information learned from routing protocols is stored in the routing table.
- C. The default IPv4 unicast routing table is inet.4
- D. Multiple routing tables can be configured on Junos devices.
Answer: B,D
NEW QUESTION # 81
What are three functions of the RE? (Choose three.)
- A. to enforce stateless firewall filters
- B. to maintain the forwarding tables
- C. to manage the PFE
- D. to monitor the chassis
- E. to implement policing
Answer: A,B,D
NEW QUESTION # 82
Which of these commands will delete the current rescue configuration?
- A. user@router> file delete rescue-configuration
- B. user@router# system delete configuration rescue
- C. user@router# delete rescue configuration
- D. user@router> request system configuration rescue delete
Answer: D
NEW QUESTION # 83
Click the Exhibit button.
-- Exhibit --
user@router> restart
^
unknown command.
-- Exhibit --
You are troubleshooting a routing issue on a device running Junos. You receive the error shown in the exhibit when you attempt to restart the routing process.
Which statement describes the problem?
- A. You have typed an invalid command.
- B. You do not have permission to restart the routing process.
- C. The routing process can only be restarted from configuration mode.
- D. The routing process must be restarted from the shell.
Answer: B
NEW QUESTION # 84
When you choose to read your e-mail using an e-mail client, your e-mail client interacts with which OSI layer?
- A. transport
- B. presentation
- C. application
- D. session
Answer: C
Explanation:
According to the OSI (Open Systems Interconnection) model, the application layer is responsible for providing the user with a means to access the network services, such as e-mail, file transfer, and virtual terminal access. An e-mail client, such as Microsoft Outlook or Apple Mail, operates at the application layer and interacts with the underlying network services to retrieve and manage e-mail messages.
NEW QUESTION # 85
What will the configuration shown in the exhibit accomplish?
- A. This route will not be announced by dynamic routing protocols but can be used for forwarding.
- B. This route will be announced to directly connected peers but they will not re-advertise it.
- C. Traffic destined for 10.202.1.0/24 will not be forwarded because of the no-readvertise configuration.
- D. When traffic matches this route, nothing will be sent to syslog because of the no-readvertise configuration.
Answer: A
NEW QUESTION # 86
What are three examples of exception traffic? (Choose three.)
- A. SNMP traffic destined to the Junos device
- B. OSPF protocol updates
- C. Unicast and multicast packets destined to another router
- D. Packets with special IP options fields
Answer: A,B,D
NEW QUESTION # 87
Which IP Protocol number is assigned to TCP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 88
Which command would correctly define a Junos device's hostname?
- A. user@host# set system host-name <name>
- B. user@host> set ip host-name <name>
- C. user@host# set ip host-name <name>
- D. user@host> set system host-name <name
Answer: A
NEW QUESTION # 89
Click the Exhibit button
You are connecting to a new device in your network and are presented with the information and prompt shown in the exhibit Which three steps must be carried out to edit the configuration on this device? (Choose three.)
- A. Log in using the root user with no password.
- B. Type configure at the > prompt.
- C. Type cli at the = prompt
- D. Log in using the root user with the root 123 password.
- E. Type cli at the > prompt
Answer: A,B
NEW QUESTION # 90
......
Pass Juniper JN0-104 Exam Quickly With ValidVCE: https://www.validvce.com/JN0-104-exam-collection.html
JN0-104 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1p2SNWplCMP92jtw07CSMIjKouK6QaIE3
