New 2025 Realistic Free Juniper JN0-104 Exam Dump Questions and Answer
JN0-104 Practice Test Engine: Try These 145 Exam Questions
Juniper JN0-104 Certification Exam covers a wide range of topics, including networking fundamentals, Junos OS fundamentals, user interfaces, routing fundamentals, and security fundamentals. JN0-104 exam is designed to test the candidate's understanding of these topics through multiple-choice questions, simulations, and practical scenarios. Junos, Associate (JNCIA-Junos) certification is recognized by leading organizations in the networking industry and is highly valued by employers.
The JN0-104 certification exam is part of the Juniper Networks Certification Program (JNCP), which offers various certifications at different levels of expertise. The JNCIA-Junos certification is the entry-level certification in this program and is a prerequisite for other advanced-level certifications. By obtaining the JNCIA-Junos certification, professionals can gain access to advanced training and certification programs, which can help them develop their skills and knowledge further.
NEW QUESTION # 73
Click the Exhibit button
Referring to the exhibit, you are unable to see any traffic coming on interface ge-0/0/0.
What is causing this problem?
- A. The ge-0/0/0 interface is administratively down.
- B. The ge-0/0/0 interface's physical link is down.
- C. The ge-0/0/0 interface has flow control disabled.
- D. The ge-0/0/0 interface has the link-mode set to half-duplex.
Answer: B
NEW QUESTION # 74
Click the Exhibit button.
Referring to the exhibit, which command was issued to generate the output?
- A. show chassis fpc
- B. show chassis routing-engine
- C. show chassis hardware
- D. show chassis environment
Answer: C
NEW QUESTION # 75
Referring to the exhibit, which action would synchronize a new routers clock with the NTP Server?
- A. Configure the correct NTP trusted kay using the set trusted-key <key-value> configuration command under the [edit system ntp] hierarchy.
- B. Configure the NTP server using the set server 172.25.11.254 configuration command under the [edit system ntp] hierarchy.
- C. Issue the set date ntp operational command.
- D. Reboot the router.
Answer: B
NEW QUESTION # 76
What are three interface prefixes for a 40-gigabit interface? (Choose three.)
- A. es
- B. xe
- C. xle
- D. fte
- E. et
Answer: C,D,E
NEW QUESTION # 77
If the Packet Forwarding Engine (PFE) does not have a route to the destination address of a packet, which action does it take?
- A. The PFE forwards the packet to the Routing Engine for further processing.
- B. The PFE drops the packet and sends an ICMP destination unreachable notification back to the source device.
- C. The PFE floods the packet out of all interfaces.
- D. The PFE queues the packet and sends a request to the Routing Engine for a Layer 3 lookup.
Answer: B
NEW QUESTION # 78
Which statement is correct about logical units on Junos device interfaces?
- A. Logical units are used only when a Layer 2 identifier, such as a VLAN, is present.
- B. Logical units are not required unless ATM or 802.1Q VLAN tagging is configured.
- C. A logical unit of 0 is required when using a frame-relay DLCI.
- D. A logical unit is always required.
Answer: D
NEW QUESTION # 79
Which two Juniper Networks products are available in virtual machine (VIM) format? (Choose two.)
- A. vIDP
- B. vMx
- C. vPTX
- D. vSRX
Answer: B,D
NEW QUESTION # 80
Which command produced the output shown in the exhibit?
- A. Show interfaces terse
- B. Show interfaces summary
- C. Show interfaces extensive
- D. Show interfaces filters
Answer: A
NEW QUESTION # 81
By default, which Junos directory contains the primary syslog file?
- A. /var/log
- B. /var/tmp
- C. /var/home
- D. /var/syslog
Answer: A
Explanation:
Ref: Junos OS Overview for Junos OS | Juniper Networks
Page 23
"...
* /var-This directory is located either on the hard drive (device wd2) or internal flash storage. It contains the following subdirectories:
...
* /log-Contains system log and tracing files.
..."
NEW QUESTION # 82
Which of the following commands will configure the maximum transmission unit size of a fast Ethernet interface?
- A. set interfaces fe-0/0/0.0 mtu 1200
- B. set interfaces fe-0/0/0 mtu 1200
- C. set interfaces fe-0/0/0 unit 0 mtu 1200
- D. set interfaces fe-0/0/0 unit 0 ethernet-options mtu 1200
Answer: B
NEW QUESTION # 83
The marketing team needs access to a server on subnet 172.0.46.0/24. The next- hop router is 10.0.4.2/30. A static route on their gateway has been configured to accomplish the task. You want to keep the static route from being redistributed into dynamic routing protocols.
Which command will satisfy this requirement?
- A. set routing-options static route 172.0.46.0/24 next-hop 10.0.4.2/30 no-resolve
- B. set routing-options static route 172.0.46.0/24 next-hop 10.0.4.2/30 no-redistribute
- C. set routing-options static route 172.0.46.0/24 next-hop 10.0.4.2/30
- D. set routing-options static route 172.0.46.0/24 next-hop 10.0.4.2/30 no readvertise
Answer: C
NEW QUESTION # 84
Click the Exhibit button.
Your Junos device is using the configuration shown in the exhibit. You notice that the 172.17.23.10/30 address Is Incorrect and should be 172.17.23.9/30.
What are two commands that would solve this problem? (choose two.)
- A. [edit interfaces]
user@router= replace pattern 17Z1723.10 with
172.17.23.9 - B. [edit interfaces]
user@router# set ge-0/0/2.0 family inet address - C. [edit interfaces]
use reroute r# delete ge-0/0/2.0 family inet address
172-17.23.10 - D. [edit interfaces]
user@router# rename ge-0/0/Z0 family inet address
172.17.23-10/30 to address 172.17.23.9/30
Answer: A,D
NEW QUESTION # 85
By default, which character indicates the operational mode prompt?
- A. >
- B. #
- C. $
- D. %
Answer: A
NEW QUESTION # 86
Referring to the exhibit.
Click the Exhibit button.
User 1 pings Router C to determine its status.
Which router shown in the exhibit, treats the traffic generated by the ping command as exception traffic?
- A. Router A
- B. Router D
- C. Router B
- D. Router C
Answer: A
NEW QUESTION # 87
By default, which character indicates the UNIX shell prompt?
- A. #
- B. $
- C. >
- D. %
Answer: D
NEW QUESTION # 88
What are three functions of the RE? (Choose three.)
- A. to implement policing
- B. to maintain the forwarding tables
- C. to manage the PFE
- D. to monitor the chassis
- E. to enforce stateless firewall filters
Answer: B,C,D
NEW QUESTION # 89
Referring to the exhibit,
which command will cause this event message?
- A. request system logout
- B. request system recover
- C. request system halt
- D. request system commit
Answer: C
NEW QUESTION # 90
Which command allows you to verify the syntax and consistency of your configuration without actually activating your configuration?
- A. commit check
- B. commit no-activate
- C. check commit
- D. commit verify
Answer: A
NEW QUESTION # 91
Which of these configuration parameters alters the default next-hop selection of a static route?
- A. no-readvertise
- B. resolve
- C. passive
- D. preference
Answer: D
NEW QUESTION # 92
Which application would be suited for UDP traffic?
- A. downloading a program
- B. Web browsing
- C. streaming television shows
- D. on-line shopping
Answer: C
NEW QUESTION # 93
Referring to the exhibit, what is the expected behavior for login attempts from users that receive a reject form from both the RADIUS and TACACS+ servers?
- A. Users are prompted for a local authentication password.
- B. Users are granted limited access to the device using a guest account.
- C. Users are prompted for the root authentication password.
- D. Users are not prompted for a local authentication password.
Answer: D
NEW QUESTION # 94
Which of these commands can be used to view the active configuration?
- A. user@router> show system configuration
- B. user@router> show configuration
- C. user@router# show
- D. user@router> show system commit
Answer: B
NEW QUESTION # 95
Which command will display only direct routes?
- A. show ip route direct
- B. show route
- C. show route inet.0 direct
- D. show route protocol direct
Answer: D
NEW QUESTION # 96
......
Guaranteed Success in JNCIA-Junos JN0-104 Exam Dumps: https://www.validvce.com/JN0-104-exam-collection.html
Juniper JN0-104 Daily Practice Exam New 2025 Updated 145 Questions: https://drive.google.com/open?id=1p2SNWplCMP92jtw07CSMIjKouK6QaIE3
